Chevrolet Camaro (fourth generation)

Last updated
Chevrolet Camaro (fourth generation)
1993ChevroletCamaroZ28-001.jpg
1993 Chevrolet Camaro Z28
Overview
Manufacturer Chevrolet (General Motors)
ProductionNovember 1992 August 27, 2002 [1] [2] [3]
Assembly Sainte-Thérèse, Quebec, Canada (Sainte-Thérèse Assembly)
Designer
Body and chassis
Class
Body style
Layout Front-engine, rear-wheel drive
Platform F-body
Related
Powertrain
Engine
  • 207 cu in (3.4 L) L32 V6 (160hp)
  • 231 cu in (3.8 L) L36 V6 (205hp)
  • 350 cu in (5.7 L) LT1 V8 (275-305hp)
  • 350 cu in (5.7 L) LT4 V8 (330hp)
  • 346 cu in (5.7 L) LS1 V8 (305-330hp)
Transmission
Dimensions
Wheelbase 101.1 in (2,568 mm)
Length
  • 1998–02: 193.5 in (4,915 mm)
  • 1993–97: 193.2 in (4,907 mm)
Width74.1 in (1,882 mm)
Height
  • 1998–02 convertible: 51.8 in (1,316 mm)
  • 1998–02 coupe: 51.2 in (1,300 mm)
  • 1994–97 convertible: 52.0 in (1,321 mm)
  • 1993–97 coupe: 51.3 in (1,303 mm)
Curb weight 2,954–3,211 lb (1,340–1,456 kg)
Chronology
Predecessor Chevrolet Camaro (third generation)
Successor Chevrolet Camaro (fifth generation)

The fourth-generation Chevrolet Camaro is a pony car that was produced by American automobile manufacturer General Motors for the 1993 through 2002 model years. It was introduced on an updated F-body platform but retained the same characteristic since the first-generation's introduction back in 1967: two doors, coupe or convertible bodystyles, rear-wheel drive, and a choice of 6-cylinder and V8 engines. The Camaro was revised in 1998 with both exterior and engine changes. General Motors discontinued production of the fourth generation of the Camaro due to slow sales, a deteriorated sports coupé market, and plant overcapacity. [6] [7]

Contents

1993–1997

1993

The 5.7-liter LT1 V8 engine 1993ChevroletCamaroZ28-003.jpg
The 5.7-liter LT1 V8 engine

The fourth generation of the Camaro was introduced in January 1993, as a 1993 model. The production was moved from GM's Van Nuys, California assembly plant to Sainte-Thérèse, Quebec, Canada from November 1992. The new design incorporated sheet moulding compound (SMC) made from chopped fiberglass and polyester resin for the roof, hatch, doors, and spoiler. [8] Both the front and rear suspension design was improved over its predecessor. The base models were powered by a 160 hp (119 kW) 3.4 L OHV V6 engine equipped with a 5-speed manual transmission as standard. The 4-speed 4L60 automatic transmission was optional. All models came with a red Chevrolet Bowtie on the grille. 1993 was the only year interior instruments had yellow lettering (this is one way to tell the 1993 models from the 1994 which had white interior instrument lettering).

Z28

1993 Camaro Z28 Indianapolis 500 pace car Chevrolet Camaro Z28 1993 Indianapolis 500 pace car.jpg
1993 Camaro Z28 Indianapolis 500 pace car

The high performance Z28 model came with rectangular dual exhaust tips to distinguish it from the base models. The Z28 featured the 5.7 L OHV LT1 V8 engine having a power output of 275 hp (205 kW) and 325 lb⋅ft (441 N⋅m) of torque that had been introduced on the Corvette one year earlier. The V8 engine came standard with a 4-speed (4L60) automatic transmission, although the Borg-Warner T56 6-speed manual transmission was a no cost option. In 1993, the Camaro Z28 was selected as the official pace car for the Indianapolis 500. A special "pace car edition" trim was introduced in the same year and featured "Indy 500" lettering on black and white body color scheme with multicolored pinstriping and white painted wheels. 645 units were made. [9]

1994

1994 Chevrolet Camaro convertible 1994 Chevrolet Camaro in Bright Red, Front Left, 08-06-2022.jpg
1994 Chevrolet Camaro convertible

Several changes were made for the 1994 model year. The mechanically controlled and operated 4L60 automatic transmission was replaced with the electronically operated and controlled 4L60E, which was shared with other GM vehicles with V8s, such as the Tahoe. Accordingly, the car's on-board computer was modified from dealing only with the engine as in 1993 (ECM), to controlling both the engine and transmission on automatic models (PCM).

The computer in 1993 was run via Speed Density system, which measured engine speed (RPM) and load (MAP in kPa) to compute airflow requirements and then use that against the VE (Volumetric Efficiency) table to closely estimate the amount of fuel to be injected. An Intake Air Temperature (IAT) sensor was also used, as air density changes with temperature. In 1994 however, the computer logic was changed to a Mass Air Flow system. This system uses a Mass Air Flow Sensor placed in front of the throttle body to measure incoming airflow into the motor by using a heated wire sensor in the airstream path, which has heat pulled away from it via the incoming air. The reduced heat is converted into a voltage signal, read by the PCM which interprets that voltage signal as mass flow. The computer uses engine sensors to judge engine conditions and provide the proper fueling off of this mass airflow reading. Another prominent difference between 1993 and 1994 systems is how the programming (or custom tuning) of the computer takes place. In 1993, the computer used a removable Memcal chip essential to run the systems. In 1994, this was swapped to a non-removable reflashable chip, which could be reprogrammed via the Assembly Line Diagnostic Link (ALDL) located underneath the driver's side of the dashboard, next to the center console.

Dashboard gauge graphics were changed from yellow to white. There was also a spot in the gauge cluster reading ASR off. Although GM had intended to install ASR or Acceleration Slip Regulation (called "TCS" by Pontiac) in the 1994 F-body models, it did not make it into production until the following model year. The Z28 received updated front brakes and cooling fans were changed mid-year from a parallel to a series setup. At low RPM, both fans operated on 6 V, but on high RPM, both operated on 12 V. Performance figures for the Z28 include a 0–60 mph acceleration time of 5.7 seconds and quarter-mile times of 14.2 seconds. [10]

1995

1995 Camaro convertible Chevrolet Camaro Convertible (Les chauds vendredis '10).jpg
1995 Camaro convertible

In 1995, the 3800 Series II V6 engine joined the 3.4 liter V6 engine offered on the base models thus giving the buyers a choice of two V6 engines for the first time. The 3800 engine had a power output of 200 hp (149 kW) and would eventually replace the 3.4 liter V6 engine due to its more refined nature. The LT1 V8 had a power output of 275 hp (205 kW). The high performance variant of the Z28 called the Z28 SS was not introduced until 1996 in collaboration with SLP Engineering with the engine tuned to have a power output of 305 hp (227 kW). 17-inch wheels also became available as an option. [11]

1996

1996 Chevrolet Camaro Z28 '96 Z-28.jpg
1996 Chevrolet Camaro Z28

1996 saw minor mechanical revisions, as well as small power gains from the new OBD II-compliant engine controls. All base models were now equipped with the 3800 series II V6 engine rated at 200 hp. New wheel and tire package on the SS resulted in better handling and braking compared to the Z28.[ clarification needed ] Convertible Super Sport cars however had 16-inch ZR-1 style wheels. Also available this year for the V6 model was the Y87 package, which included an Auburn limited-slip differential, better tires, dual exhaust tips, 4-wheel disc brakes, a sportier steering ratio, and more aggressive gear ratio in the differential for automatic transmission equipped cars.

1997

1997 Camaro Z28 convertible 1997 Camaro Z28.jpg
1997 Camaro Z28 convertible
1997 Camaro interior 1997 Camaro Interior (01) (cropped).jpg
1997 Camaro interior

For the 1997 model year, the Camaro featured a new interior and tri-colored taillights that would be standard on all models from 1997 to 2002. A "30th Anniversary Limited Edition" trim package, commemorating 30 years since the Camaro was introduced, was added to the range which included unique orange stripes on white base paint. It was only available on the Z28, SS, and RS models. A 30th Anniversary Camaro may be identified by RPO code Z4C on the trim tag. A total of 979 30th Anniversary models were made in 1997. New 5-spoke 16-inch wheels became standard on the Z28 this year (17-inch ZR-1 style on SS coupé models) available in either polished, chrome, or white (only on the 30th Anniversary models), replacing the previous 10-spoke turbine style design.

30th Anniversary LT4 SS

An additional 108 30th Anniversary models were modified by SLP Engineering equipment with the LT4 V8 engine having a power output of 330 hp (246 kW) and 340 lb⋅ft (461 N⋅m) of torque. 100 cars were allocated to the US market while 6 cars were sold to Canadian buyers. The remaining 2 were prototypes. These models have the R7T RPO code. The LT4 was the fastest factory-built Camaro available, as well as the most expensive at US$40,000.

1998–2002

1998

1998 Camaro 1998 Chevrolet Camaro (8066720408).jpg
1998 Camaro
The engine bay of a 1998 Camaro Z28, having the 5.7-liter LS1 V8 engine 1998ChevroletCamaroZ28-engine.jpg
The engine bay of a 1998 Camaro Z28, having the 5.7-liter LS1 V8 engine

For the 1998 model year, the Camaro received a facelift and now had a new front clip. This replaced the quartet of square inset headlights. Replacing the LT1 engine was the all-new 5.7 L (346 cuin) LS1 V8 engine introduced a year prior in the 1997 Corvette, generating 350 hp (261 kW) at the flywheel but marketed as 310 hp (231 kW) in the Camaro as to not deter sales from the Corvette. The new engine featured an aluminum cylinder block with iron sleeves, reducing weight by about 95 lb (43 kg) as compared to the iron block LT1 engine. The only changes made to the LS1 compared to the Corvette were the relocation of drive belt accessories to accommodate the Camaro’s engine bay, an oil pan tailored to the F-body, as well as opting for a cable-actuated throttle body, as opposed to the Corvette’s drive-by-wire. 1998 was the only year LS1 powered models had a working coolant temperature gauge. Minor changes were made to the suspension and the brakes were increased in size. Total production for 1998 was 48,495 units in total.

1999

1999 Camaro finished in Hugger Orange 1999-camaro.jpg
1999 Camaro finished in Hugger Orange

The 1999 model year saw only a few minor changes made to the Camaro. These included the introduction of new colors such as "Hugger Orange". The fuel tanks were now made of plastic with a 16.8 gallon capacity instead of preceding metal units which had a capacity of 15.5 gallons. The valve covers on the LS1 powered models were switched to a center-bolt style, and traction control now became available on the V6 models. A new "oil change" light was added to the instrument cluster as General Motors introduced their early oil-life monitoring systems. A Torsen differential was added for the Z28 and SS models. 1999 was the last model year for the RPO 1LE performance option which included factory installed double adjustable Koni shocks, stiffer springs, a larger front and rear anti-roll bars, and stiffer suspension bushings.

2000

Camaro 035.jpg
Camaro 037 sm.jpg
2000 Camaro V6

Changes for 2000 were also largely cosmetic in nature. Monterey Maroon Metallic was added as an optional color, similar to the previously available Medium Patriot Red. The SS, however, was not available in this color. The black exterior color was now renamed Ebony. Previously, all V8 powered models had side mirrors painted in this color. A new four-spoke steering wheel, as found in other GM models of the time, was introduced to replace the two-spoke steering wheel dating back to the 1993 models. New 10-spoke 16-inch wheels became available, but the older 5-spoke wheels were still optional. The base models came with 16-inch steel wheels with hubcaps. The 3.8 L (231 ci) V6 and the 5.7 L (346 ci) LS1 V8 engines continued with no changes.

2001

2001 proved to be the lowest production year for the Camaro with 29,009 units built. This was partially due to production ending earlier than usual to begin work on the 35th Anniversary models commemorating 35 years of the Camaro. The Z28 and SS models received the intake manifold from the LS6 engine, used on the Z06 from 2001 to 2004 and the first generation of the Cadillac CTS-V from 2004 to 2005. This change also resulted in a revised camshaft profile and removal of the EGR system. Chevrolet also introduced a new slave cylinder for the clutch assembly that was superior to the design of previous years, as well as an LS6 clutch in manual models. Accordingly, the engine power output was increased to 310 hp (231 kW) for the Z28 and 325 hp (242 kW) for the SS which also added a power steering cooler. SLP Engineering reintroduced the RS model this year, which included rally stripes and stock cold air intake system along with the Z28 take-off exhaust from their SS conversions.

2002

2002ChevroletCamaroSS35-001.jpg
2002ChevroletCamaroSS35-002.jpg
2002 SS 35th Anniversary Edition convertible

The final fourth-generation Camaro was built on 27 August 2002 after which the Boisbriand plant, located in the province of Quebec just outside of Montreal then closed down. [12] Total production for 2002 was 42,098 units. [13]

GM's Performance Division unveiled a Z28 show vehicle at the 2002 Woodward Dream Cruise as a send off for the Camaro's 35-year heritage. It emulated the 1960s and 1970s Penske-Sunoco stock TransAm race team vehicles. The 35th Anniversary trim package was also available for the SS. [14]

Related Research Articles

<span class="mw-page-title-main">Chevrolet Corvette</span> American sports car by the Chevrolet division of General Motors (GM)

The Chevrolet Corvette is a line of American two-door, two-seater sports cars, manufactured and marketed by General Motors, under the Chevrolet marque, since 1953.

<span class="mw-page-title-main">Chevrolet Camaro</span> Muscle car manufactured by Chevrolet

The Chevrolet Camaro is a mid-size American automobile manufactured by Chevrolet, classified as a pony car. It first went on sale on September 29, 1966, for the 1967 model year and was designed to compete with the Ford Mustang. The Camaro shared its platform and major components with the Firebird, produced by General Motors' Pontiac division that was also introduced for 1967.

<span class="mw-page-title-main">Chevrolet Impala</span> American full-size car

The Chevrolet Impala is a full-size car that was built by Chevrolet for model years 1958 to 1985, 1994 to 1996, and 2000 to 2020. The Impala was Chevrolet's popular flagship passenger car and was among the better-selling American-made automobiles in the United States.

<span class="mw-page-title-main">Pontiac Firebird</span> Car model

The Pontiac Firebird is an American automobile built and produced by Pontiac from the 1967 to 2002 model years. Designed as a pony car to compete with the Ford Mustang, it was introduced on February 23, 1967, five months after GM's Chevrolet division's platform-sharing Camaro. This also coincided with the release of the 1967 Mercury Cougar, Ford's upscale, platform-sharing version of the Mustang. The name "Firebird" was also previously used by GM for the General Motors Firebird series of concept cars in the 1950s.

<span class="mw-page-title-main">Chevrolet Caprice</span> Motor vehicle

The Chevrolet Caprice is a full-size car produced by Chevrolet in North America for the 1965 to 1996 model years. Full-size Chevrolet sales peaked in 1965 with over a million sold. It was the most popular car in the U.S. in the 1960s and early 1970s, which, during its lifetime, included the Biscayne, Bel Air, and Impala.

The F platform, or F-body, was General Motors' rear-wheel drive pony car automobile platform from 1967 until 2002. It was based partially on the GM X platform, which was used for compact applications instead of the sporting intent of the F-Body. The only two vehicles to have been built using the F-Body platform are the Chevrolet Camaro and the Pontiac Firebird. The fourth character in the Vehicle Identification Number for an F-body car is "F" on model year 1985 and up vehicles. Earlier Camaros and Firebirds had differing VIN codes, but are now commonly referred to as F-bodies.

<span class="mw-page-title-main">General Motors LS-based small-block engine</span> Family of V8 and V6 engines

The General Motors LS-based small-block engines are a family of V8 and V6 engines designed and manufactured by American automotive company General Motors. First introduced in 1997, the family is a continuation of the earlier first- and second-generation Chevrolet small-block engine, of which over 100 million have been produced altogether, and is also considered to be one of the most popular V8 engines ever. Spanning three generations, a new, sixth generation is expected to enter production soon. Various small-block V8s were and still are available as crate engines.

<span class="mw-page-title-main">Chevrolet small-block engine (first- and second-generation)</span> Car engine

The Chevrolet small-block engine is a series of gasoline-powered V8 automobile engines, produced by the Chevrolet division of General Motors between 1954 and 2003, using the same basic engine block. Referred to as a "small-block" for its size relative to the physically much larger Chevrolet big-block engines, the small block family spanned from 262 cu in (4.3 L) to 400 cu in (6.6 L) in displacement. Engineer Ed Cole is credited with leading the design for this engine. The engine block and cylinder heads were cast at Saginaw Metal Casting Operations in Saginaw, Michigan.

<span class="mw-page-title-main">Chevrolet Malibu</span> Mid-sized American car

The Chevrolet Malibu is a mid-size car manufactured and marketed by Chevrolet from model years 1964–1983 and since 1997. The Malibu began as a trim-level of the Chevrolet Chevelle, becoming its own model line in 1978. Originally a rear-wheel drive intermediate, GM revived the Malibu nameplate as a front-wheel-drive car in 1997.

<span class="mw-page-title-main">Chevrolet Monte Carlo</span> Two-door coupe manufactured by General Motors

The Chevrolet Monte Carlo is a two-door coupe that was manufactured and marketed by the Chevrolet division of General Motors. Deriving its name from the city in Monaco, the Monte Carlo was marketed as the first personal luxury car of the Chevrolet brand. Introduced for the 1970 model year, the model line was produced across six generations through the 2008 model year, with a hiatus from 1989 to 1994. The Monte Carlo was a closely aligned variant of the Pontiac Grand Prix through its entire production.

<span class="mw-page-title-main">Super Sport (Chevrolet)</span> Performance option package of Chevrolet car models

Super Sport, or SS, is the signature performance option package offered by Chevrolet on a limited number of its vehicles. All SS models come with distinctive "SS" markings on their exterior. The SS package was first made available for the 1961 Impala. Some of the other models bearing the SS badge include the Camaro, Chevelle, El Camino, Impala, Monte Carlo, Nova and Chevrolet Pickup Trucks. Current SS models are produced by the GM Performance Division.

<span class="mw-page-title-main">Chevrolet 9C1</span> Code for police cars manufactured by Chevrolet

9C1 is a production code used by Chevrolet to designate a vehicle intended for use as a police car or car-based emergency vehicle. In marketing, these vehicles are sometimes named Police Pursuit Vehicle or Police Patrol Vehicle (PPV). The 9C1 package is intended to compete with the Ford Police Interceptor and Stellantis's Dodge Charger Pursuit and Dodge Durango Pursuit.

<span class="mw-page-title-main">Holden Commodore (VZ)</span> Motor vehicle

The Holden Commodore (VZ) is a full-size car that was produced by Holden from 2004 to 2006 as a sedan and to 2007 as a wagon and Ute sold alongside the new VE series. It was the fourth and final iteration of the third generation of the Commodore and the last to spawn a coupé variant. Its range continued to include the luxury variants, Holden Berlina (VZ) and Holden Calais (VZ).

<span class="mw-page-title-main">Holden Commodore (VY)</span> Motor vehicle

The Holden Commodore (VY) is a full-size car that was produced by Holden from 2002 to 2004. It was the third iteration of the third generation of the Commodore. Its range included the luxury variants, Holden Berlina (VY) and Holden Calais (VY); commercial versions were called the Holden One Tonner (VY), Holden Ute (VY), and Holden Crewman (VY). In 2003, the range also saw the introduction of the first Commodore-based all-wheel drive variants, including the Holden Adventra (VY) wagon.

Callaway Cars Inc. is an American specialty vehicle manufacturer and engineering company that designs, develops, and manufactures high-performance product packages for cars, pickup trucks, and SUVs. They specialize in Corvettes and GM vehicles. New GM vehicles are delivered to Callaway facilities where these special packages and components are installed. Then the vehicles are delivered to GM new car dealers where they are sold to retail customers, branded as Callaway. Callaway Cars is one of four core Callaway companies, including Callaway Engineering, Callaway Carbon and Callaway Competition.

<span class="mw-page-title-main">Chevrolet Camaro (fifth generation)</span> Motor vehicle

The fifth-generation Chevrolet Camaro is a pony car that was manufactured by American automobile manufacturer Chevrolet from 2010 to 2015 model years. It is the fifth distinct generation of the muscle/pony car to be produced since its original introduction in 1967. Production of the fifth generation model began on March 16, 2009 after several years on hiatus since the previous generation's production ended in 2002 and went on sale to the public in April 2009 for the 2010 model year.

<span class="mw-page-title-main">Chevrolet Camaro (third generation)</span> Motor vehicle

The third-generation Chevrolet Camaro is an American pony car which was introduced for the 1982 model year by Chevrolet. It continued to use General Motors' F-body platform and produced a "20th Anniversary Commemorative Edition" for 1987 and "25th Anniversary Heritage Edition" for 1992. These were also the first Camaros with factory fuel injection, four-speed automatic transmissions, five-speed manual transmissions, four-cylinder engines, 16-inch wheels, and hatchback bodies. For 1987 a convertible Camaro was reintroduced, converted by ASC in relatively small numbers. The third-generation Camaro continued through the 1992 model year.

<span class="mw-page-title-main">Chevrolet Camaro (second generation)</span> Motor vehicle

The second-generation Chevrolet Camaro is an American pony car that was produced by Chevrolet from 1970 through the 1981 model years. It was introduced in the spring of 1970. Build information for model 123-12487 was released to the assembly plants in February of that same year. It was longer, lower, and wider than the first generation Camaro. A convertible, which was available for the first generation, was unavailable for the second. GM engineers have said the second generation is much more of "A Driver's Car" than its predecessor.

<span class="mw-page-title-main">Chevrolet Camaro (first generation)</span> Motor vehicle

The first-generation Chevrolet Camaro is an American pony car introduced by Chevrolet in the fall of 1966 for the 1967 model year. It used a brand-new rear-wheel-drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop, and convertible. The F-body was shared with the Pontiac Firebird for all generations. A 230 cu in Chevrolet straight-6 was standard, with several Chevy V8s available as options. The first-generation Camaro was built through the 1969 model year.

<span class="mw-page-title-main">Chevrolet Camaro (sixth generation)</span> Motor vehicle

The sixth-generation Chevrolet Camaro is an American pony car. Produced by automobile manufacturer Chevrolet, it was first introduced to the public on May 16, 2015. Sales started in 2015 for the 2016 model year. The Camaro now utilizes the GM Alpha platform shared with the Cadillac ATS and CTS and features MacPherson struts in front, rather than the former multi-link setup. General Motors claims that 70 percent of architectural components in the new Camaro are unique to the car.

References

  1. "Two Rare Dick Harrell Chevy Camaros - GM High Tech Performance Magazine". www.superchevy.com. 14 September 2006. Retrieved August 30, 2015.
  2. "GM Assembly Plant Quebec - www.swiss35thle.com". Archived from the original on 2017-01-18. Retrieved 2017-01-17.
  3. Weekly, Staff of Old Cars (1 October 2010). Camaro & Firebird - GM's Power Twins. Krause Publications. ISBN   9781440217524 via Google Books.[ permanent dead link ]
  4. "Popular Mechanics". Hearst Magazines. December 1989.
  5. "1989 Chevrolet California IROC Camaro Concept Car Development". howstuffworks.com. The Auto Editors of Consumer Guide. Archived from the original on 2019-05-08. Retrieved 2019-05-08.
  6. "Camaro, Firebird lines to end with 2002 model year". Oklahoma City Journal Record. Associated Press. 2001-09-26. Archived from the original on 2008-02-12. Retrieved 2022-08-21.
  7. McCoy, Guy (29 July 2004). "Rising from the Ashes". Popular Hot Rodding. Retrieved 2016-10-21. Publicly, GM blamed slow sales, a deteriorated sports coupe market, and plant overcapacity. For the 4th generation camaro's got the all new small blocks LT1 and LS1 small blocks.
  8. Young, Anthony (2004). Camaro. MBI Publishing. p. 123. ISBN   978-0-7603-1932-1 . Retrieved 2010-09-08.
  9. Young, Anthony (September 2004). Young, p. 125. ISBN   9780760319321 . Retrieved 2010-10-13.
  10. "Thunderbird Club of Iowa". Archived from the original on 2007-10-12. Retrieved 2009-06-13.
  11. Huffman, John Pearley (2013-11-13). "A Visual History of the Chevrolet Camaro, from 1967 to Today". Car & Driver . Retrieved 2019-03-21.
  12. Cooper, Anderson (2002-08-27). "Newsnight Transcripts". CNN. Retrieved 2006-12-27.
  13. "2002 Camaro Production Numbers". www.camaroz28.com. 23 July 2002. Retrieved 17 March 2013.
  14. "2003 Heritage Camaro and Trans AM". 2002firehawk-c26.net. Retrieved 2010-08-13.