This article contains promotional content .(September 2012) |
Lingenfelter Performance Engineering (LPE) is an American automotive engineering manufacturer specializing in high-performance automobile modifications, specifically engines, intercooling, exhaust pipes, brakes, and supercharging, Now headquartered in Brighton, Michigan the company was founded by and named for NHRA driver John Lingenfelter in Decatur, IN. [1] Over the decades since its founding, LPE has been creating high-performance versions of many GM vehicles, such as the F-Bodies (Camaro, Firebird), [2] B Bodies (Impala SS, Caprice, Roadmaster, Fleetwood), Corvette, CTS-V, GTO, Silverado, Suburban, Tahoe, Escalade, Denali, SSR, Hummer H2, and Sierra. Furthermore, it has also created performance enhancement packages for the Dodge Viper and Plymouth Prowler.
In January 1998, MotorTrend tested a Chevrolet Tahoe modified and tuned by Lingenfelter, powered by a 396 (6.5L) cubic inch Chevrolet V8 and achieved a 5.1-second 0-60 time as well as a 0.9g lateral acceleration figure. The SUV completed the quarter mile in 13.8 seconds at 96 mph. These numbers matched the performance figures of a base model C4 Corvette and GMC Syclones/Typhoons of that era. [3] Motor Trend also tested an LPE-built Impala SS that had the same performance numbers as the last generation M5 (0-60 4.7 sec) due to its bored and stroked LT-1 (displacement rose to 383 in3 and horsepower rose to 425). [4] Another LPE vehicle was featured in the June 1996 issue of Car and Driver : A special C4 Corvette with a 427.6 in3 engine that attained a top speed of 212 mph (ca. 341 km/h) . [5] LPE's 2001 Corvette 427 twin-turbo with 800 rear-wheel horsepower accomplished a 0-60 mph acceleration in 1.97 seconds. [6] Another LPE vehicle that the company developed and marketed to customers which has been one of their most powerful vehicles offered to date was a 2006 twin-turbo Corvette Z06 with 1,109 rear wheel horsepower. [7]
In 2014, they expanded operations. [8]
The current owner of Lingenfelter Performance Engineering is Ken Lingenfelter. [9]
Power-to-weight ratio is a calculation commonly applied to engines and mobile power sources to enable the comparison of one unit or design to another. Power-to-weight ratio is a measurement of actual performance of any engine or power source. It is also used as a measurement of performance of a vehicle as a whole, with the engine's power output being divided by the weight of the vehicle, to give a metric that is independent of the vehicle's size. Power-to-weight is often quoted by manufacturers at the peak value, but the actual value may vary in use and variations will affect performance.
The Chevrolet Corvette is a line of American two-door, two-seater sports cars manufactured and marketed by General Motors under the Chevrolet marque since 1953.
A muscle car is an American-made two-door sports coupe with a powerful engine, generally designed for high-performance driving.
The Chevrolet Impala is a full-size car that was built by Chevrolet for model years 1958 to 1985, 1994 to 1996, and 2000 to 2020. The Impala was Chevrolet's popular flagship passenger car and was among the better-selling American-made automobiles in the United States.
The Chevrolet Caprice is a full-size car produced by Chevrolet in North America for the 1965 through 1996 model years. Full-size Chevrolet sales peaked in 1965, with over a million units sold. It was the most popular car in the U.S. in the 1960s and early 1970s, which, during its production, included the Biscayne, Bel Air, and Impala.
The General Motors LS-based small-block engines are a family of V8 and offshoot V6 engines designed and manufactured by the American automotive company General Motors. First introduced in 1997, the family is a continuation of the earlier first- and second-generation Chevrolet small-block engine, of which over 100 million have been produced altogether and is also considered one of the most popular V8 engines ever. Spanning three generations, a new, sixth generation is expected to enter production soon. Various small-block V8s were and still are available as crate engines.
The Chevrolet "big-block" engine is a term for a series of large-displacement, naturally-aspirated, 90°, overhead valve, gasoline-powered, V8 engines; that were developed and produced by the Chevrolet Division of General Motors, from the 1950s until present.
The Yenko Super Camaro was a modified Chevrolet Camaro prepared by Yenko Chevrolet, developed by the dealership owner and racer, Don Yenko, and subsequently aided by special parts ordering directly through Chevrolet.
9C1 is a production code used by Chevrolet to designate a vehicle intended for use as a police car or car-based emergency vehicle. 9C1-designated vehicles are marketed under the Police Pursuit Vehicle or Police Patrol Vehicle (PPV) nameplate. The 9C1 package is intended to compete with the Ford Police Interceptor and Stellantis's Dodge Charger Pursuit and Dodge Durango Pursuit.
John Earl Lingenfelter was an NHRA driver, engineer and tuner.
The Chevrolet Corvette (C6) is the sixth generation of the Corvette sports car that was produced by Chevrolet division of General Motors for the 2005 to 2013 model years. It is the first Corvette with exposed headlamps since the 1962 model. Production variants include the Z06, ZR1, Grand Sport, and 427 Convertible. Racing variants include the C6.R, an American Le Mans Series GT1 championship and 24 Hours of Le Mans GTE-Pro winner.
The Chevrolet Corvette (C3) is the third generation of the Corvette sports car that was produced from 1967 until 1982 by Chevrolet for the 1968 to 1982 model years. Engines and chassis components were mostly carried over from the previous generation, but the body and interior were new. It set new sales records with 53,807 produced for the 1979 model year. The C3 is the third generation of the Chevrolet Corvette, and marks the second time the Corvette would carry the Stingray name, though only for the 1969–76 model years. This time it was a single word as opposed to Sting Ray as used for the 1963–67 C2 generation. The name would then be retired until 2014 when it returned with the release of the C7.
The Chevrolet Corvette (C4) is the fourth generation of the Corvette sports car, produced by American automobile manufacturer Chevrolet from 1983 until 1996. The convertible returned, as did higher performance engines, exemplified by the 375 hp (280 kW) LT5 found in the ZR1. In early March 1990, the ZR1 would set new records for the highest average speed over 24 hours at over 175 mph (282 km/h) and highest average speed over 5,000 miles at over 173 mph (278 km/h). With a completely new chassis, modern sleeker styling, and other improvements to the model, prices rose and sales declined. The last C4 was produced on June 20, 1996.
The Chevrolet Engineering Research Vehicle (CERV) is a series of Chevrolet experimental cars. Chevrolet Staff engineer, designer, and race car driver Zora Arkus-Duntov started development of the CERV I in 1959, and began work on the CERV II in 1963. Chevrolet chief engineer Don Runkle and Lotus' Tony Rudd discussed creating a new show car to demonstrate their engineering expertise in 1985; It would become the CERV III. Corvette chief engineer Dave Hill unveiled the CERV IV in 1993, a test vehicle for the 1997 C5 Corvette.
Callaway Cars Inc. is an American specialty vehicle manufacturer and engineering company that designs, develops, and manufactures high-performance product packages for cars, pickup trucks, and SUVs. They specialize in Corvettes and GM vehicles. New GM vehicles are delivered to Callaway facilities where these special packages and components are installed. Then the vehicles are delivered to GM new car dealers where they are sold to retail customers, branded as Callaway. Callaway Cars is one of four core Callaway companies, including Callaway Engineering, Callaway Carbon and Callaway Competition.
Chevrolet Performance, formerly "GM Performance Parts", is an automotive performance parts brand that sells everything from camshafts and cylinder heads to high-performance crate engines and upgrades for late-model Chevrolet vehicles. It was founded in 1967 to support the Trans-Am Camaro race teams.
The Chevrolet Impala (fourth generation) is a full-size automobile produced by Chevrolet for the 1965 through 1970 model years. The 1965 Impala was all new, while the 1967 and 1969 models featured new bodies on the same redesigned perimeter frame introduced on the 1965 models. All Impalas of this generation received annual facelifts as well, distinguishing each model year. Throughout the early 1960s, Chevrolet's basic body designs became increasingly subtle, while the bright trim that was part of the Impala package added more than a touch of luxury to the look. The same pattern was followed in the interiors, where the best materials and equipment Chevrolet had to offer were displayed. In short, the Impala was on its way to becoming a kind of junior-grade Cadillac, which, for both the company and its customers, was just fine.
Hennessey Performance Engineering (HPE) is an American hypercar manufacturer and high-performance vehicle creator.
Falcon Motorsports is an American manufacturer of high performance automobiles, most notably the Falcon F series Falcon F5 and Falcon F7. The Michigan-based company was founded in 2009 by American automotive designer and engineer Jeff Lemke.
The Chevrolet Corvette (C8) is the eighth generation of the Corvette sports car manufactured by American automobile manufacturer Chevrolet. It is the first rear mid-engine Corvette since the model's introduction in 1953, differing from the traditional front mid-engine design started in 1963. The C8 was announced in April 2019, and the coupe made its official debut on July 18, 2019, in Tustin, California. The convertible made its debut in October 2019 during a media event at the Kennedy Space Center to coincide with the 50th anniversary of the Apollo 11 mission. Production officially began on February 3, 2020, delayed by the 2019 General Motors strike.
{{cite web}}
: CS1 maint: archived copy as title (link)