The DB Class 66 was a class of two Deutsche Bundesbahn (DB) locomotives designed for fast goods train and passenger train services on the main and branch lines of Deutsche Bundesbahn (DB), the national railway of the former West Germany.
The Deutsche Reichsbahn had a standard passenger train tank engine with a wheel arrangement of 1′C1′ or 2-6-2 and a low axle load, which was designated in their classification system as the DRG Class 64. The Class 64 was developed from 1926 onwards and it was built between 1928 and 1940. Many German manufacturers contributed to the series.
The Class 85 was a German goods train tank engine and standard locomotive (Einheitslok) with the Deutsche Reichsbahn.
The Class 62 engines were standard passenger train tank locomotives of Germany's Deutsche Reichsbahn-Gesellschaft (DRG).
The DRG Class 89.0 was a goods train tank engine of standard design built for the Deutsche Reichsbahn (DRG).
The German DRG Class 71.0 was a 2-4-2T locomotive with the Deutsche Reichsbahn, which was intended as a replacement for railbuses. Originally it had been planned for these standard engines (Einheitsloks) to haul fast passenger trains.
The Prussian T 18 was the last class of tank locomotives developed for the Prussian state railways. They were originally intended for services on the island of Rügen as replacements for Class T 12 and T 10 engines. They emerged when a class of locomotive was conceived in 1912 that was to handle express and passenger trains in border areas or in shuttle services on short routes. A tank engine design with symmetrical running gear was envisaged because, unlike a tender locomotive, it could run equally fast forwards and backwards and could be operated on return journeys without having to be turned on a turntable. Its power and top speed were to be the same as those of the P 8. Robert Garbe designed this 4-6-4 (2′C2′) tank locomotive for 100 km/h with a 17-ton axle load and contracted the Vulkan Werke in Stettin to build it. It was given the designation T 18.
Between 1934 and 1941 the Deutsche Reichsbahn (DRG) converted a total of 691 former Prussian-built Class 55.25–56 steam locomotives; the result was the DRG Class 56.2–8. The carrying axle enabled higher speeds and the engine could even be used as a passenger train locomotive. In addition the average axle load was lower, so that these locomotives could also be used on branch lines. The conversion entailed moving the boiler forward and raising it somewhat. The vehicles were given operating numbers between 56 201 and 56 891, although the numbering was not continuous.
The Mecklenburg T 3 was a German, goods train, tank locomotive built for the Grand Duchy of Mecklenburg Friedrich-Franz Railway from 1884. Originally designated as the Class XVII it had an 0-6-0T wheel arrangement and was based on the Prussian T 3.
The Oldenburg Class G1s were German steam locomotives procured by the Grand Duchy of Oldenburg State Railways from 1867 to 1877. They were intended to work both as tank engines as well as with a tender.
The Oldenburg G 4.2 steam locomotives were goods train engines built for the Grand Duchy of Oldenburg State Railways between 1895 and 1909 in several series.
The Prussian G 12.1 was a German steam locomotive built for the Prussian state railways during the First World War and was the largest Prussian freight locomotive with a 2-10-0 wheel arrangement. It had three cylinders, the two outer ones driving the third axle and the inner one the second axle.
The Oldenburg Class T 5.1 was a German steam locomotive built for the Grand Duchy of Oldenburg State Railways as a tank engine for passenger train duties. Its design was based on that of the Prussian T 5.1.
The Prussian state railways grouped a variety of different types of passenger tank locomotive into its Prussian Class T 5. Several examples of the sub-classes T 5.1 and T 5.2 transferred into the Deutsche Reichsbahn as DRG Classes 71.0 and 72.0.
The Prussian Class T 3 steam locomotives procured for the Prussian state railways were 0-6-0 tank locomotives. Together with the Prussian T 2 they were the first locomotives that were built to railway norms. The first units were delivered by Henschel in 1882.
The Prussian G 8.2 class of locomotives actually incorporated two different locomotive types: one was the Prussian/Oldenburg G 8.2, for which the Deutsche Reichsbahn subsequently issued follow-on orders; the other was the G 8.2 of the Lübeck-Büchen Railway.
The Prussian Class T 12 were early German passenger tank locomotives built for the Prussian state railways in large numbers. These locomotives were superheated variants of the T 11.
The Prussian G 7.3 was a class of 2-8-0 locomotives of the Prussian state railways. The third class of the G 7 series, they were intended to power heavy goods trains on steep inclines, on which the permissible axle load was not yet that high. This affected for example, the Paderborn–Holzminden and Betzdorf–Siegen routes.
