Ducati 750 Imola Desmo

Last updated
750 Imola Desmo
Ducati 750 Paul Smart DM.JPG
ManufacturerDucati
Production1972
Class Racing
Engine 748 cc (45.6 cu in) 2-valve per cylinder desmodromic air cooled 90° V-twin
Bore / stroke 80.0 mm × 74.4 mm (3.15 in × 2.93 in) [1]
Compression ratio 10.8:1
Top speed249 km/h (155 mph) [2]
Power 84 hp (63 kW) @ 8800 rpm [2]
Transmission 5-speed
Suspension Front: Marzocchi telescopic fork
Rear: pivoting fork with Ceriani suspension units
Brakes Front: dual 270 mm disc
Rear: single 230 mm disc
Tires Front: 100/90 V18
Rear: 120/90 V18
Wheelbase 1,540 mm (61 in)

The Ducati 750 Imola Desmo is a racing motorcycle built by Ducati that won the 1972 Imola 200 race in the hands of Paul Smart. This win helped define Ducati's approach to racing.

Contents

Design

On March 20, 1970, Fabio Taglioni (September 10, 1920 – July 18, 2001) made the first sketches for the layout of a new Ducati V-twin engine. By April his drawings were completed, and by July, there was a running motor. By August 1970, there was a complete prototype motorcycle. Taglioni engaged Leopoldo Tartarini, the founder of Italjet, to refine the styling aspects of the new Ducati.

In October 1970, the decision was made by Ducati to re enter motorcycle competition. Director Arnaldo Milvio and General Manager Fredmano Spairani, were enthusiastic about racing, and had encouraged Fabio Taglioni to develop the 750 V twin.

GP V-twins

In 1971 five 500 cc V-twins were built to compete in Italian championship and Grand Prix events. Ducati felt that this would demonstrate the bike before a large audience and gain publicity. If they won, that was a bonus.

Seeley

Even before this, in late 1970, and despite Taglioni's opposition to the idea, Spairani wanted the frame for Ducati's racer to be built by Colin Seeley, a well-known British specialist frame builder of the time. Seeley was asked to develop a racing frame similar to those he had built for Matchless G50 engines. Ducati sent some prototype crankcases for Seeley to work from and the new Seeley frame was ready in February 1971. Meanwhile, in less than six months, Fabio Taglioni and his team had designed and built their own complete bike.

GP Bike technical details

Restored 500 cc GP racer 1972 Ducati 500 GP prototipo "Armaroli" - without fairing and gas tank (1).JPG
Restored 500 cc GP racer

While the 750 cc and 500 cc racers were very similar, the 500 had a much shorter 58 mm stroke, with the same 74 mm bore as the 750.[ citation needed ] The 500 had the same bore and stroke as the later 500 Pantah. It had 10.5:1 compression and initially produced 61.2 bhp at 11,000 rpm.[ citation needed ] All Ducati's 500 cc GP engines used desmodromic two-valve heads with an 80 degree included valve angle. They used remote float bowl Dell'Orto 40 mm carburettors, and had a six-speed gearbox with a dry, multiplate clutch. Ignition was electronic, provided by nearby Ducati Elettrotecnica, but was initially unreliable. Dual spark plugs were used, and the final ignition system used four coils, two on each side of the frame.

In the beginning Taglioni's Ducati chassis was used. It had a single Lockheed front disc brake and a twin leading shoe Fontana rear drum brake. Dry weight was 135 kg (297 lb)[ citation needed ] and it had 18 inch rims front and rear with 3.00 and 3.25 wheel rims. The wheelbase was 1430mm (56.3 in).

In June 1971, Phil Read tested the 500 cc bike with the Seeley frame, and pronounced it the better of the two. The frame was then fitted to Spaggiari's bike as well. It was raced in 1972 by Bruno Spaggiari, Ermanno Guliano and Phil Read.

Production 750 GT

1972 Ducati 750 GT Ducati 750 GT 1972.jpg
1972 Ducati 750 GT

Also in June 1971, the first Ducati 750 GT models came out of the factory, distinguished by silver frames, metal-flake paint, fibreglass fuel tanks, 1 1/8" (1.125") Amal carburettors, and twin leading shoe rear brakes.

At least one machine from this initial run is thought to have arrived at the US importer, Berliner - another early machine (possibly the test mule - complete with Dunstall dual front discs on gaitered Norton forks) was pictured much earlier, on Vic Camp's display at the 1970-71 winter UK national motorcycle show.

Imola 750 bikes

Taglioni experimented with four valve heads at this time, but failed to produce better power figures than his two valve heads, so the two valve racers continued. He continued to experiment with four valve heads until 1973. In 1971 race results were spoilt by a run of gearbox and ignition problems. Phil Read's second to Agostini in the San Remo Grand Prix, and a fourth, also by Read, at Monza in the Grand Prix delle Nazione were the highlights of the season.

A Seeley frame 750 cc had been tested by Mike Hailwood at Silverstone in August 1971 with a view to competing in F750. Hailwood decided against it, saying he didn't think the handling was good enough. Taglioni had already produced a new frame, for the production bike, incorporating some of the Seeley features. He later said he felt the Seeley frame had been too light for the V twins. They used the production frame for the 1972 Imola bikes.

The 200 Mile formula was first run in Italy in 1972, at Imola. Ducati prepared eight 750 cc bikes for the event. Paul Smart, Bruno Spaggiari, Ermanno Giuliano, and Alan Dunscombe were secured as riders. By now racing fever had set in, and the factory wanted to win. The bikes had the new factory frames and 750 engines, and were once more prepared in a very short time. Wherever possible the bike was lightened, and new 40 mm Dell'Orto carburetors with accelerator pumps were used. These engines delivered 80 hp (60 kW) at 8,500 rpm. [3]

Victory

In that Imola 200 held in April, Smart and Spaggiari came in first and second. Ducati V-twin motorcycles received a lot of publicity from the win. This inspired the green frame 1974 Ducati 750 Super Sports. These bikes serve as the inspiration for the retro-styled 2005 PaulSmart 1000 LE, one of the SportClassic series.

Related Research Articles

<span class="mw-page-title-main">Ducati</span> Italian motorcycle manufacturer

Ducati is an Italian motorcycle manufacturing company headquartered in Bologna, Italy. The company is directly owned by Italian automotive manufacturer Lamborghini, whose German parent company is Audi, itself owned by the Volkswagen Group.

<span class="mw-page-title-main">Fabio Taglioni</span> Italian engineer

Fabio Taglioni was an Italian engineer.

<span class="mw-page-title-main">Ducati 916</span> Sport bike

The Ducati 916 is a fully faired sport bike made by Ducati from 1994 to 1998. Featuring a 916 cc (56 cu in) fuel injected, 4-valve, desmo, liquid-cooled, 90° V-twin engine in a trellis frame with a single-sided swingarm and USD forks, the 916 is frequently cited as one of the most beautiful motorcycles ever.

<span class="mw-page-title-main">Ducati PaulSmart 1000 LE</span> Type of motorcycle

The Ducati PaulSmart 1000 LE (PS1000LE) is a retro styled motorcycle built by Ducati in 2006 to commemorate Paul Smart's win at the Imola 200 race in 1972, a win that helped define Ducati's future approach to racing. The bike is styled in the fashion of the Ducati 750 Imola Desmo race bike that Paul Smart rode to victory, and the 1974 750 SuperSport it originally inspired. It is one of the SportClassic series designed by Pierre Terblanche.

<span class="mw-page-title-main">Ducati singles</span> Ducati motorcycle made from 1950 to 1974

The Ducati singles were single cylinder motorcycles, made by Ducati from 1950 to 1974. Chief Engineer Fabio Taglioni developed a desmodromic valve system in these years, a system that opens and closes the valves using the camshaft, without the need for valve springs. This valve system has become a trademark feature of Ducati motorcycles.

<span class="mw-page-title-main">Ducati L-twin engine</span>

The L-twin is a naturally aspirated two-cylinder petrol engine by Ducati. It uses a 90-degree layout and 270-degree firing order and is mounted with one cylinder horizontal.

<span class="mw-page-title-main">Ducati Pantah</span> Type of motorcycle

The Ducati Pantah is an Italian motorcycle with a 90° V-twin engine, produced between 1980 and 1986.

The Ducati SportClassics are a range of retro styled motorcycles introduced by Ducati at the 2003 Tokyo Motor Show, and put on sale in 2005 for the 2006 model year. The Paul Smart version was made for the 2006 model year only, while the Sport1000 ran from 2006 through the 2009 model years, and the GT1000 ran from the 2007 through 2010 model years.

<span class="mw-page-title-main">Ducati Supersport</span> Italian air-cooled 4 stroke desmodromic 2-valve 90° L-twin motorcycle

The Ducati Supersport and SS are a series of air-cooled four stroke desmodromic 2-valve 90° L-twin motorcycles made by Ducati since 1988. A limited edition Supersport called the SuperLight was sold in 1992. The name harked back to the round case 1973 Ducati 750 Super Sport, and the 1975 square case 750 and 900 Super Sport. The appellation 'SS' was applied only to the later belt drive (Pantah) based models.

<span class="mw-page-title-main">Paul Smart (motorcyclist)</span> British motorcycle racer (1943–2021)

Paul Smart was an English short circuit motorcycle road racer who later entered Grands Prix.

Ducati Bipantah was a prototype 90° V4 four-stroke motorcycle engine made by Ducati in 1981. It was designed by Pierluigi Mengoli under the supervision of Fabio Taglioni. It had four cylinders and made coupling two Ducati Pantah V-twin engines. It remained a prototype, although it had good results during dyno-tests. The project ended in late 1982, when then-owners VM Motori decided not to build the bike for which the motor was intended for.

<span class="mw-page-title-main">MV Agusta 350 Six</span> Type of motorcycle

The MV Agusta 350 6 cilindri was a prototype racing motorcycle built by the Varese company MV Agusta in 1957, for the 350 cc class of the FIM Motorcycle World Championship. The project was resurrected in 1968. Neither version was ever used in a race. The only surviving model is now in the MV Agusta factory museum.

<span class="mw-page-title-main">BSA/Triumph racing triples</span> Type of motorcycle

The BSA/Triumph racing triples were three cylinder 750 cc racing motorcycles manufactured by BSA/Triumph and raced with factory support from 1969-1974. There were road racing, production racing, endurance racing and flat track variants. The machines were based on the road-going BSA Rocket 3/Triumph Trident.

<span class="mw-page-title-main">Ducati 350 Mark 3</span> SOHC motorcycle by Ducati

The Ducati 350 Mark 3 is a 340 cc (21 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati from 1968 to 1974. It was one of the first 'wide case' Ducati singles produced. A higher performance version, the Ducati 350 Mark 3D, which used desmodromic valves was also available.

The Ducati 239 Mark 3 is a 239 cc (14.6 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati in limited quantities for the French market in 1974. The French Government has announced that they were to increase VAT on motorcycles of 240 cc and above in 1975. Ducati responded by producing the 239 to take advantage of the lower 20% VAT rate on sub-240 machines. To compensate for the reduced capacity, the engine was tuned to produce more power with a different camshaft, slipper piston, 30 mm carburettor and a different exhaust using a Lafranconi silencer.

The Ducati 450 Mark 3 is a 436 cc (26.6 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati from 1969 to 1974. The 450 was largest displacement version of the OHC single series produced by Ducati and used the 'wide case' engine. A higher performance version, the Ducati 450 Mark 3D, which used desmodromic valves was also available. The 450 was criticised for vibration and lack of performance compared to other models such as the Mach 1.

<span class="mw-page-title-main">Ducati 250 Mark 3</span> SOHC motorcycle by Ducati

The Ducati 250 Mark 3 is a 249 cc (15.2 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati from 1967 to 1974. Initially produced using the 'narrow case' engine, the newly introduced 'wide case' engine was used from 1968. A higher performance version, the Ducati 250 Mark 3D, which used desmodromic valves was also available.

<span class="mw-page-title-main">Ducati 450 R/T</span> SOHC motorcycle by Ducati

The Ducati 450 R/T (road/trail) is a 436 cc (26.6 cu in) single cylinder bevel drive desmodromic SOHC motorcycle produced by the Italian manufacturer Ducati from 1971 to 1974. Initially produced at the request of the American importers Berliner Motor Corporation as a motocross / enduro motorcycle offered exclusively to the American market, and only a few hundred machines were made of this type. It is the only off-road racing motorcycle to use desmodromic valves. An optional street equipment kit was available. From 1972 it was produced for the European Market as a street legal on/off road machine, which was sometimes known as the 450 T/S.

<span class="mw-page-title-main">Ducati 350 Scrambler</span> SOHC motorcycle by Ducati

The Ducati 350 Scrambler, also known in the US as the Ducati 350 SS and in Europe as the Ducati 350 SCR is an on/off road 340 cc (21 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati from 1968 to 1974. It was the first of the 'wide case' Ducati singles produced and aimed at the American Market. Total production was around 11,500 machines.

The Ducati parallel twins are a series of 350 cc (21 cu in) and 500 cc (31 cu in) parallel twin SOHC motorcycles produced by the Italian manufacturer Ducati from 1975 to 1981, although 67 Sports Desmos were supplied to Australian importer Frazers in 1983. These were likely built from spares. The 500cc versions were also produced under licence in Spain by MotoTrans, where production continued until 1983. Sales were poor and the machines were unreliable, earning them the nickname of paralysed twins.

References

  1. ↑ Ducati Imola, Ultimate Motor-Cycle Book, Hugo Wilson, Dorling Kindersley. ISBN   0-7513-0043-8 pp.94-95 Accessed 23 January 2021
  2. 1 2 Everitt, Charles; Gingerelli, Dain; Manning Michels, James (2011), 365 Motorcycles You Must Ride, MBI Publishing Company, p. 64, ISBN   978-0-7603-3474-4 , retrieved March 9, 2014
  3. ↑ "Italian Motorcycles 4" magazine, Article: P28 - P33, "Baby Boomers", Subtitle:"Remember when Ducati went 500 GP racing?" Author: Ian Falloon. Publisher: Federal Publishing Company NSW Australia.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.