ETAP 28s

Last updated

ETAP 28s
Development
Designer Marc-Oliver von Ahlen and Stile Bertone
Location Belgium
Year2007
Builder(s) ETAP Yachting
Role Cruiser
NameETAP 28s
Boat
Displacement 8,157 lb (3,700 kg)
Draft 5.75 ft (1.75 m)
Hull
Type monohull
Construction glassfibre
LOA 28.25 ft (8.61 m)
LWL 27.75 ft (8.46 m)
Beam 11.25 ft (3.43 m)
Engine type Volvo Penta D1-20 19 hp (14 kW) diesel engine
Hull appendages
Keel/board typefin keel
Ballast2,579 lb (1,170 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig type Bermuda rig
Sails
Sailplan fractional rigged sloop
Mainsail area277.71 sq ft (25.800 m2)
Jib/genoa area161.46 sq ft (15.000 m2)
Other sails genoa: 204.51 sq ft (19.000 m2)
Total sail area438 sq ft (40.7 m2)
  ETAP 28i
ETAP 30cq  

The ETAP 28s is a Belgian sailboat that was designed by Marc-Oliver von Ahlen, with the interior designed by Stile Bertone, as a cruiser and first built in 2007. [1] [2] [3]

Contents

The ETAP 28s was replaced in the company line by the ETAP 30cq in about 2011. [1]

Production

The design was built by ETAP Yachting in Belgium between 2007 and 2011, but it is now out of production. [1] [4] [3]

Design

The ETAP 28s is a recreational keelboat, built predominantly of glassfibre, with wood trim. The construction is of a polyester glassfibre and closed-cell polyurethane foam sandwich, which provides buoyancy and makes the boat unsinkable. It has a 7/8 fractional sloop rig with a deck-stepped mast, a plumb stem, a walk-through reverse transom, an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel or shoal draft keel. The fin keel version displaces 8,157 lb (3,700 kg) and carries 2,579 lb (1,170 kg) of ballast, while the shoal draft version displaces 8,421 lb (3,820 kg) and carries 2,843 lb (1,290 kg) of ballast. [1] [5]

The boat has a draft of 5.75 ft (1.75 m) with the standard fin keel and 3.16 ft (0.96 m) with the optional shoal draft keel. [1]

The boat is fitted with a Swedish Volvo Penta D1-20 19 hp (14 kW) diesel engine for docking and manoeuvring. The fuel tank holds 17 U.S. gallons (64 L; 14 imp gal) and the fresh water tank has a capacity of 30 U.S. gallons (110 L; 25 imp gal). [1]

The design has sleeping accommodation for four people, with a double "V"-berth in the main cabin and an aft cabin with a double berth mounted transversely. There is a stowage area in the forepeak. The galley is located on the port side just forward of the companionway ladder. The galley is L-shaped and is equipped with a two-burner stove, an icebox and a sink. A navigation station is opposite the galley, on the starboard side. The head is located just aft of the navigation station on the starboard side. [6]

Operational history

The boat was at one time supported by a class club, the ETAP Owners Association. [7]

In a 2007 review in Sailing magazine, naval architect Robert Perry wrote, "it's amazing what you can do in 28 feet, 2 inches today. Italian designer Stile Bertone created this interior. I can almost see this little 28-footer being a comfortable liveaboard boat for a single, compact lifestyle fellow or gal. There is a large double berth aft, a compact but reasonable galley to port and a wide, open saloon. The settee extends forward of the forward bulkhead. I'm not sure what the idea is there unless it's to provide short berths for short kids. It's a clever layout done in attractive light wood veneer with stainless steel pipe rail accents. I'm not sure how easy it would be for me to squeeze myself into that aft berth and it makes me chuckle (stop that!) to think of the person sleeping aft having to get out during the night." [8]

In a 2008 review in Practical Sailing, Darrell Nicholson wrote, "with a displacement of 8,400 pounds, the Etap 28s is a stocky pocket cruiser. In addition to offering the fail-safe of positive buoyancy, she sports a spacious cabin for her size, along with a no-nonsense sail plan that makes it an easy boat to sail. However, there's no free lunch, and the extra beam, weight, and volume needed to add space for flotation results in a 28-footer with nearly 11 feet maximum beam. This adds to the skin drag and makes the addition of light-air sails a welcome option." [9]

In a Cruising World 2008 review Herb McCormick wrote, "we sailed the Etap on a day in which the breeze never topped 5 knots, and we couldn't begin to gauge the boat's real potential. The 28s would clearly be a lot of fun to drive and easily handled by a solo sailor or a couple. But its high boom, small headsail, and short rig-while no doubt ideal in the windy North Sea and other high-latitude destinations-suggests that it might be underpowered in such light-air venues as the Chesapeake. An overlapping genoa is an option we'd suggest for sailors who cover waters with low-to-moderate breeze." [10]

See also

Related Research Articles

<span class="mw-page-title-main">Swan 391</span> Sailboat class

The Swan 391 is a Finnish sailboat that was designed by Ron Holland as a cruiser-racer and first built in 1981.

<span class="mw-page-title-main">Swan 42</span> Sailboat class

The Swan 42 is a Finnish sailboat that was designed by Ron Holland as a cruiser-racer and first built in 1980.

The ETAP 23iL is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.

The ETAP 28i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1988.

The ETAP 30 is a Belgian sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.

The ETAP 30i is a Belgian sailboat that was designed by French designers Mortain & Mavrikios, as a cruiser and first built in 1995.

The ETAP 32i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1992.

The ETAP 39s is a Belgian sailboat that was designed by Slovenian designers J&J Design, as a cruiser and first built in 1998.

The EATP 22 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1974.

The ETAP 26 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1982.

The ETAP 38i is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1989.

The ETAP 35i is a Belgian sailboat that was designed as a cruiser and first built in 1992.

The ETAP 26i is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1994.

<span class="mw-page-title-main">ETAP 34s</span> Sailboat class

The ETAP 34s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1997.

The ETAP 24i is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 1999.

The ETAP 32s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 2003.

The ETAP 37s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 2003.

The ETAP 26s is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 2005.

The ETAP 48Ds is a Belgian sailboat that was designed by Marc-Oliver von Ahlen, with the interior designed by Stile Bertone, as a cruiser and first built in 2009.

The ETAP 30cq is a Belgian sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 2010. The interior was designed by Stile Bertone.

References

  1. 1 2 3 4 5 6 McArthur, Bruce (2020). "ETAP 28s sailboat". sailboatdata.com. Archived from the original on 5 April 2021. Retrieved 5 April 2021.
  2. McArthur, Bruce (2021). "Yachtdesign v. Ahlen". sailboatdata.com. Archived from the original on 4 April 2021. Retrieved 5 April 2021.
  3. 1 2 ETAP Yachting (2008). "EATP 28s Superb performance in grand comfort". ETAP Yachting. Archived from the original on 10 February 2008. Retrieved 5 April 2021.
  4. McArthur, Bruce (2021). "Etap Yachting". sailboatdata.com. Archived from the original on 23 March 2021. Retrieved 5 April 2021.
  5. ETAP Yachting (2007). "EATP 28s Technical Specifications". ETAP Yachting. Archived from the original on 9 November 2007. Retrieved 5 April 2021.
  6. ETAP Yachting (2007). "EATP 28s Technical Specifications". ETAP Yachting. Archived from the original on 9 November 2007. Retrieved 5 April 2021.
  7. McArthur, Bruce (2021). "Etap Owners Association". sailboatdata.com. Archived from the original on 23 March 2021. Retrieved 27 March 2021.
  8. Perry, Robert (5 February 2007). "Etap 28s". Sailing magazine. Archived from the original on 5 April 2021. Retrieved 5 April 2021.
  9. Nicholson, Darrell (19 February 2008). "Boat Review: Buoyant Etap 28s Delivers Modern Form and Function". Practical Sailing. Archived from the original on 5 April 2021. Retrieved 5 April 2021.
  10. McCormick, Herb (28 April 2008). "Etap 28". Cruising World. Archived from the original on 5 April 2021. Retrieved 5 April 2021.