Development | |
---|---|
Designer | Mortain & Mavrikios |
Location | Belgium |
Year | 1997 |
No. built | 549 |
Builder(s) | ETAP Yachting |
Name | ETAP 21i |
Boat | |
Boat weight | 2,712 lb (1,230 kg) |
Draft | 2.30 ft (0.70 m) |
Hull | |
Type | monohull |
Construction | glassfibre |
LOA | 21.52 ft (6.56 m) |
LWL | 20.01 ft (6.10 m) |
Beam | 8.17 ft (2.49 m) |
Engine type | outboard motor |
Hull appendages | |
Keel/board type | tandem keels |
Ballast | 772 lb (350 kg) |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
Sails | |
Sailplan | fractional rigged sloop |
Total sail area | 257.26 sq ft (23.900 m2) |
The ETAP 21i is a Belgian trailerable sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1997. [1] [2]
The ETAP 21i design was developed into the ETAP 22s after 2009, a design using the same hull, but it was not known if any had been produced by 2021. [1]
The ETAP 21i was built by ETAP Yachting in Belgium between 1997 and 2009, with 549 boats completed, but it is now out of production. [1] [3]
The design is a recreational keelboat, built predominantly of glassfibre, with wood trim. It has a fractional sloop rig; a plumb stem; a vertical transom; twin transom-hung rudders controlled by a tiller and two fixed, shallow draft, tandem keels. [1]
The boat is normally fitted with a small outboard motor for docking and maneuvering. [1]
The boat was at one time supported by a class club, the ETAP Owners Association. [5]
In a 2003 review in Yacht and Boat magazine, Barry Tranter wrote, "as the wind builds she heels initially, then the cast-iron bulb keel stiffens her up. And just when you think you may need to reach for the traveller to ease a bit of pressure you realise that the leeward rudder is biting deep into the water and keeps the boat tracking straight. This is the most memorable aspect of the Etap's behaviour; because the rudders are inclined to the vertical at rest (i.e. their lower tips are canted outwards) the leeward rudder is more or less vertical as the boat heels and it is also pushed deeper into the water as the leeward bilge submerges (and the windward rudder lifts clear.) As a result directional stability is exceptional, vital on short, light hulls, which can get out of sorts when tiller, mainsheet and the skipper's brain get out of phase with sharp gusts and lulls. Handling the Etap is simple ... This is a delightful and refreshing boat to sail..." [6]
The ETAP 22i is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1983.
The ETAP 23iL is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.
The ETAP 28i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1988.
The ETAP 30 is a Belgian sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.
The ETAP 30i is a Belgian sailboat that was designed by French designers Mortain & Mavrikios, as a cruiser and first built in 1995.
The ETAP 32i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1992.
The EATP 22 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1974.
The EATP is a Belgian sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1978.
The ETAP 23i is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1982.
The ETAP 26 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1982.
The ETAP 38i is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1989.
The ETAP 35i is a Belgian sailboat that was designed as a cruiser and first built in 1992.
The ETAP 26i is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1994.
The ETAP 34s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1997.
The ETAP 24i is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 1999.
The ETAP 32s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 2003.
The ETAP 37s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 2003.
The ETAP 26s is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 2005.
The ETAP 48Ds is a Belgian sailboat that was designed by Marc-Oliver von Ahlen, with the interior designed by Stile Bertone, as a cruiser and first built in 2009.
The ETAP 30cq is a Belgian sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 2010. The interior was designed by Stile Bertone.