Development | |
---|---|
Designer | Ron Holder |
Location | United States |
Year | 1982 |
Builder(s) | Holder Marine Hobie Cat |
Role | Day sailer-Cruiser |
Name | Holder 17 |
Boat | |
Displacement | 950 lb (431 kg) |
Draft | 4.17 ft (1.27 m) with keel down |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 17.00 ft (5.18 m) |
LWL | 15.00 ft (4.57 m) |
Beam | 7.00 ft (2.13 m) |
Hull appendages | |
Keel/board type | swing keel |
Ballast | 325 lb (147 kg) |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 18.80 ft (5.73 m) |
J foretriangle base | 6.66 ft (2.03 m) |
P mainsail luff | 20.00 ft (6.10 m) |
E mainsail foot | 7.75 ft (2.36 m) |
Sails | |
Sailplan | Fractional rigged sloop Masthead sloop |
Mainsail area | 77.50 sq ft (7.200 m2) |
Jib/genoa area | 62.60 sq ft (5.816 m2) |
Spinnaker area | 140.10 sq ft (13.016 m2) |
Total sail area | 140.04 sq ft (13.010 m2) |
The Holder 17 is an American trailerable sailboat that was designed by Ron Holder as a pocket cruiser and day sailer and first built in 1982. [1] [2] [3]
The boat was developed from the 1976 Vagabond 17 design. [1] [4]
The design was built by Holder Marine and Hobie Cat in the United States, but it is now out of production. [1] [3] [5]
The Holder 17 is a recreational keelboat, built predominantly of fiberglass, with teak wood trim. It has a fractional sloop rig with aluminum spars. The hull has a raked stem, a vertical transom, a transom-hung rudder controlled by a tiller and a locking swing keel. The boat has foam flotation, making it unsinkable. Cabin headroom is 48 in (122 cm). [1] [3] [6]
The boat is normally fitted with a small 2 to 5 hp (1 to 4 kW) outboard motor for docking and maneuvering. [3]
The design has a hull speed of 5.2 kn (9.6 km/h). [3]
In a 2010 review, Steve Henkel wrote, "unlike most of Hobie Cat's boats, the Holder 17 is neither a catamaran nor a product of the fertile mind of Hobie Alter, the multibull firm's namesake. It is instead a 'monomaran' from the drawing board of businessman and designer Ron Holder. First came the cabin sloop, in 1981; the next year, a daysailer version was introduced. Best features: The Holder has good sitting headroom compared to her comps. Foam flotation is intended to make her more or less sink-proof. Her relatively heavy swing keel keeps her minimum draft low for easy launching and retrieval at a ramp, while offering good stability with the keel in the 'down' position. With relatively high D/L and low SA/D compared with her comps, she should be stable in heavy air. Worst features: The steel swing keel can be a pain in the neck to keep from rusting." [3]
Related development
Similar sailboats
The Newport 16 is an American trailerable sailboat that was designed by Bill Lapworth as a daysailer and a pocket cruiser and first built in 1965.
The Sirius 20, 21 and 22 are a family of Canadian trailerable sailboats that was designed by Hubert Vandestadt for cruising and first built in 1976.
The Vagabond 17 is an American trailerable sailboat that was designed by Ron Holder as a pocket cruiser and first built in 1976.
The Aquarius 23 is an American trailerable sailboat that was designed by Peter Barrett and Stan Miller as a cruiser and first built in 1969.
The Balboa 22 is an American trailerable sailboat that was designed by W. Shad Turner and William M. Downing as a cruiser and first built in 1977.
The Blazer 23 is a Canadian trailerable sailboat that was designed by Bruce Kirby as racer-cruiser and first built in 1988.
The Cal 22 is an American trailerable sailboat that was designed by C. R. Hunt Associates as a cruiser and first built in 1984.
The Chrysler 20 is an American trailerable sailboat that was designed by Halsey Herreshoff and first built in 1977.
The Clipper 21, also called the Clipper Marine 21 and the Clipper Mark 21, is an American trailerable sailboat that was designed by William Crealock and first built in 1971.
The Ensenada 20 is an American trailerable sailboat that was designed by Lyle C. Hess as a cruiser and first built in 1972.
The Holder 20 is an American trailerable planing sailboat that was designed by Ron Holder, in collaboration with sailmaker Dave Ulmann, as a one design racer and first built in 1980.
The South Coast 22 is an American trailerable sailboat that was designed by Carl Alberg, James Monroe and Hollis Metcalf as a pocket cruiser and first built in 1968.
The Merit 22 is an American trailerable sailboat that was designed by Paul Yates as a racer-cruiser and first built in 1981.
The RK 20 is an American trailerable sailboat that was designed by Lyle C. Hess as a cruiser and first built in 1972.
The San Juan 23 is an American trailerable sailboat that was designed by Canadian Bruce Kirby and Don Clark as a cruiser and first built in 1975.
The Santana 25 is an American trailerable sailboat that was designed by W. Shad Turner as an International Offshore Rule Quarter Ton class racer and first built in 1973. The boat was Turner's first design.
The Venture 22 is an American trailerable sailboat that was designed by Roger MacGregor as a cruiser and first built in 1968.
The Venture 222 is an American trailerable sailboat that was designed by Roger MacGregor as a cruiser and first built in 1971.
The Windrose 18 is an American trailerable sailboat that was designed by W. Shad Turner as a cruiser and first built in 1974.
The Windrose 22 and Laguna 22 are a series of American trailerable sailboats that were designed by W. Shad Turner as cruisers and first built in 1977.