Development | |
---|---|
Designer | Richard Hartley |
Location | Australia |
Year | 1956 |
No. built | 1,800 |
Builder(s) | Hartley Boat Plans |
Role | Day sailer-One-design racer |
Name | Hartley TS16 |
Boat | |
Displacement | 794 lb (360 kg) |
Draft | 4.07 ft (1.24 m) |
Hull | |
Type | Monohull |
Construction | Wood or fibreglass |
LOA | 16.40 ft (5.00 m) |
LWL | 14.00 ft (4.27 m) |
Beam | 7.22 ft (2.20 m) |
Hull appendages | |
Keel/board type | Centreboard |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 16.00 ft (4.88 m) |
J foretriangle base | 5.50 ft (1.68 m) |
P mainsail luff | 19.00 ft (5.79 m) |
E mainsail foot | 11.00 ft (3.35 m) |
Sails | |
Sailplan | Fractional rigged sloop Masthead sloop |
Mainsail area | 104.50 sq ft (9.708 m2) |
Jib/genoa area | 44.00 sq ft (4.088 m2) |
Total sail area | 148.50 sq ft (13.796 m2) |
The Hartley TS16 (Trailer Sailer 16 foot) is an Australian trailerable sailing boat that was designed in 1956 by New Zealander Richard Hartley as a day sailer and which later became a one design racer. [1] [2] [3]
The design was based on a traditional New Zealand mullet fishing boat and was the first trailer sailer sailboat design built. [3] Hartley later designed the TS18 and TS21. [4]
Most boats completed have been built by amateur builders using hand tools in residential garages and constructed of wood. Construction time is estimated at 400 hours. Later, some were commercially manufactured of fibreglass over a foam core. The boat was actually designed to fit into a garage. Construction plans are supplied by Hartley Boat Plans of Australia. About 1,800 boats have been completed. [1] [3] [5] [6]
The Hartley TS16 is a recreational centreboard or bilge keel trailable yacht, built predominantly of wood, or of fibreglass over a foam core, with wood trim. It has a fractional sloop rig, originally with wooden spars and later with aluminum. The hull has a slightly raked stem, a near-vertical transom, a transom-hung rudder controlled by a tiller and a centreboard. It displaces 794 lb (360 kg). [1] [6]
The boat has a draft of 4.07 ft (1.24 m) with the centreboard extended and 9 in (23 cm) with it retracted, allowing beaching or ground transportation on a trailer. [1]
A 2001 review in Australian Sailing described the design: "the boat that started the trailer-sailer movement, the Hartley 16 designed by New Zealander Richard Hartley in the early 1950s, still has good support and a very active class association in Australia. Hartley designed the boat for ease of construction in plywood with only hand tools by the home handyman. Although boats have been built professionally in fibreglass foam/sandwich, the most common way of getting on the water in a new boat is to build it in timber from the official plans..." [6]
The Fireball is a British sailing dinghy that was designed by Peter Milne as a one-design racer and first built in 1962.
The Sonar is a one design trailerable racing sailboat that was designed by Canadian naval architect Bruce Kirby and first built in 1980.
The CL 16, or CL16, is a Canadian sailing dinghy that was designed by Ian Proctor, Graham Dodd and George Blanchard, as a cruiser and daysailer, and first built in 1968.
A trailer sailer is a type of sailboat that has been designed to be easily transported using a boat trailer towed by an automobile. They are generally larger than a sailing dinghy. Trailer sailers include day sailers and small cabin cruisers, suitable for living on.
The Phantom is a British sailing dinghy that was designed by Paul Wright and Brian Taylor as a one-design racer and first built in 1971.
The Impulse is an Australian sailing dinghy that was designed by Arthur Caldwell as a one-design racer and first built in 1975.
The CS 22 is a Canadian trailerable sailboat, that was designed by John A. Butler and first built in 1971. The design is out of production.
The Siren 17 is a Canadian trailerable sailboat, that was designed by Hubert Vandestadt as trailer sailer and first built in 1974.
The C&C 44 and the C&C 44 Custom are a series of Canadian sailboats, that were designed by Robert W. Ball and first built in 1985.
The Watkins 17, also referred to as the W17, is an American trailerable sailboat that was designed by the Watkins brothers and first built in 1975.
The Shrimp is a Canadian dinghy that was designed by Hubert Vandestadt and Fraser McGruer and first built in 1972. The boat was designed to employed as a powered yacht tender, a rowboat or as a sailing dinghy.
The Skunk 11 is a Canadian utility dinghy that can be rowed, used as a motorboat, fishing boat or as a sailing dinghy. It was designed by Hubert Vandestadt and first built in 1969.
The Spindrift 13 is a Canadian sailing dinghy that was designed by Hubert Vandestadt and first built in 1965.
The Cygnus 20 is a Canadian trailerable sailboat that was designed by George Hinterhoeller and first built in 1963.
The Stuart Knockabout is an American trailerable sailboat that was designed as a daysailer, by L. Francis Herreshoff and first built in 1932. The boat is L.F. Herreshoff design number 53.
The Blazer 23 is a Canadian trailerable sailboat that was designed by Bruce Kirby as racer-cruiser and first built in 1988.
The Cornish Crabber 17, or just Cornish Crabber, is a British trailerable sailboat that was designed by Roger Dongray as a daysailer and pocket cruiser and first built in 1989.
The ETAP 23iL is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.
The Mistral 16 is a Canadian sailing dinghy that was designed as a daysailer and first built in 1980.
The Flying Tiger 7.5 is a Chinese trailerable sailboat that was designed by American naval architect Robert Perry as a one design racer. It was first built in 2009.
{{cite web}}
: CS1 maint: numeric names: authors list (link)