Mark 25

Last updated

Mark 25
Development
Designer George Harding Cuthbertson
Location United States
Year1984
No. built17
Builder(s) Mark Yachts
Ontario Yachts
Eli Laminates
Sumner Yachts
Role Racer-Cruiser
NameMark 25
Boat
Displacement 4,130 lb (1,873 kg)
Draft 4.25 ft (1.30 m)
Hull
Type monohull
Construction fiberglass
LOA 24.58 ft (7.49 m)
LWL 20.00 ft (6.10 m)
Beam 9.25 ft (2.82 m)
Engine type outboard motor
Hull appendages
Keel/board typefin keel
Ballast1,779 lb (807 kg)
Rudder(s)transom-mounted rudder
Rig
Rig type Bermuda rig
I foretriangle height28.00 ft (8.53 m)
J foretriangle base7.70 ft (2.35 m)
P mainsail luff37.00 ft (11.28 m)
E mainsail foot12.00 ft (3.66 m)
Sails
Sailplan fractional rigged sloop
Mainsail area222.00 sq ft (20.624 m2)
Jib/genoa area107.80 sq ft (10.015 m2)
Total sail area329.80 sq ft (30.639 m2)
Racing
PHRF 216

The Mark 25 is an American trailerable sailboat that was designed by Canadian George Harding Cuthbertson, as one of the first works under his new design firm Motion Designs Limited after he left C&C Design. The boat was intended as a racer-cruiser and first built in 1984. [1] [2] [3]

Contents

Production

The design was initially built under contract to Mark Yachts of Old Saybrook, Connecticut by Ontario Yachts in Canada, Sumner Yachts and Eli Laminates of Long Island, New York. Production started in 1984 and ended in 1991 after Mark Yachts had gone out of business, with production continued by Sumner Yachts. A total of 17 boats were completed and the design is now out of production. [1] [3] [4]

Design

The Mark 25 is a recreational keelboat, built predominantly of solid fiberglass, with wood trim. It has a fractional sloop rig with an unusually tall mast, a large mainsail and a small "blade" jib. The hull has a raked stem, a plumb transom, a transom-hung rudder controlled by a tiller and a fixed fin keel. It displaces 4,130 lb (1,873 kg) and carries 1,779 lb (807 kg) of ballast. [1] [3] [5]

The boat has a draft of 4.25 ft (1.30 m) with the standard keel and 3.00 ft (0.91 m) with the optional shoal draft keel. [1] [3] [5]

The boat is normally fitted with a small 6 to 10 hp (4 to 7 kW) outboard motor for docking and maneuvering. [1] [3]

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin, a straight settee in the main cabin and an aft quarter berth on the port side. The galley is located on the starboard side, just forward of the companionway ladder. The galley is L-shaped and is equipped with a two-burner stove, icebox and a sink. The head is located just aft of the bow cabin on the port side. Cabin headroom is 68 in (173 cm). [1] [3]

The design has a PHRF racing average handicap of 216 and a hull speed of 6.0 kn (11.1 km/h). [3]

Operational history

In a 1985 Yachting magazine review, Nancy Trimble stated, "George Cuthbertson’s recent return to the drafting board has resulted in a handsome new 25-footer that's a pleasure to sail, singlehanded or with company ... The Mark 25's tall and slender spar stands out in a crowd, and I had no difficulty spotting her from quite a distance away ... A spar that tall—40' off the deck—on a boat her size is one of the most striking features of the Mark 25. Cuthbertson wanted this boat to be easily driven under her big mainsail alone, like a catboat. He succeeded in that effort. But the Mark 25 also carries a non-overlapping blade jib on her fractional rig for improved windward performance, especially in light air. Although designed primarily for cruising sailors, the Mark 25 is a quick little club racer, and she proved it last summer in the competitive Wednesday night racing series on the eastern end of Long Island Sound. If cruising alone is more to your liking than taking a crew around the race course, the Mark 25, has internal halyards, all led aft to the cockpit for easy singlehandling. Manufactured by Eli Laminates in Oakdale, Long Island, N.Y, the boat's hull is of all fiberglass layup with no core or exotics that would add to her moderate price ... Belowdecks, her 9'3" beam and neatly 6' of headroom provide cruising comfort and berths for five people." [5]

In a 2010 review Steve Henkel wrote, "Mark Yachts Ltd. of Old Saybrook, [Connecticut], induced George Cuthbertson of C&C fame to design this unusual "cat-sloop" rigged yacht. The design concept was to maximize cruising accommodations while maintaining performance similar to "day racers" like the J/24, (The scheme was only partially successful; as an indicator, the Mark 25's PHRF is about 216–6 seconds lower than the C&C 25—compared to the J/24's 174.) Various builders (including Ontario Yachts of Canada, Sumner Yachts, and Eli Laminates) apparently built the vessels at various times, and after Mark Yachts Ltd. disappeared, Sumner marketed the Mark 25 in 1990 and 1991. Two keel drafts were available, shoal (3' 0") and deep (4' 3"). The deep version gives a very noticeable improvement in performance, The big, high aspect-ratio rig is a distinctive feature, resulting in a bridge clearance of almost 44 feet ... and the boat will sail respectably even without the tiny blade jib. Best features: The boat is easy to handle, well balanced and very maneuverable. The high trunk cabin and "bubble" in the deck at the mast, plus wide 9'3" beam, help provide plenty of room below. A huge companionway hatch and sizable portlights give plenty of cabin light. Worst features: Deep cockpit seats are comfortable but limit visibility over the high cabin house." [3]

See also

Related Research Articles

<span class="mw-page-title-main">Tanzer 25</span> Sailboat class

The Tanzer 25 is a Canadian trailerable sailboat, that was designed by the French company of Joubert-Nivelt and first built in 1986. The design is out of production.

The Triton 25, also called the Pearson 25, is an American trailerable sailboat, that was designed by Gary Mull and first built in 1984. The design is out of production.

<span class="mw-page-title-main">C&C 29</span> Sailboat class

The C&C 29 is a Canadian sailboat, that was designed by Cuthbertson & Cassian as an International Offshore Rule Half Ton class racer-cruiser and first built in 1977.

<span class="mw-page-title-main">Bluejacket 23</span> Sailboat class

The Bluejacket 23 is a 23-foot (7.0 m) Canadian trailerable, fibreglass monohull sailboat designed by Cuthbertson & Cassian as a day sailer and club racer and first built in 1967.

The Capri 25 is an American trailerable sailboat that was designed by Frank Butler as a one design racer and first built in 1980.

The Dufour 1800 is a French sailboat that was designed by Laurent Cordelle and Michel Dufour as a trailerable cruiser-racer and first built in 1979.

The Alberg 29 is a Canadian sailboat that was designed by Carl Alberg as racer-cruiser and first built in 1976.

The Catalina 375 is an American sailboat that was designed by Gerry Douglas as a cruiser and first built in 2008.

<span class="mw-page-title-main">Alberg 37</span> Sailboat class

The Alberg 37 is a Canadian sailboat that was designed by Carl Alberg as a racer-cruiser and first built in 1967.

The Sabre 38 is an American sailboat that was designed by Roger Hewson and the Sabre Design Team as a racer-cruiser and first built in 1981.

The Cal 39 Mark II and Cal 39 Mark III are a series of American sailboats that were designed by C. William Lapworth as racer-cruisers to fit the International Offshore Rule and first built in 1978.

The Islander 40 is an American sailboat that was designed by Doug Peterson as a racer-cruiser and first built in 1979.

The Nordic 40 is an American sailboat that was designed by Robert Perry as a racer-cruiser and first built in 1978.

The Bristol 40 is an American sailboat that was designed by Ted Hood as a racer-cruiser and first built in 1970.

The Balboa 24 is an American trailerable sailboat that was designed by W. Shad Turner and William Downing as a racer-cruiser and first built in 1981.

The Irwin 25 is an American trailerable sailboat that was designed by Ted Irwin as a cruiser and first built in 1969.

The Lancer 28 is an American sailboat that was designed by W. Shad Turner as a trailerable daysailer and cruiser, which was first built in 1977.

The Morgan 22 is an American trailerable sailboat that was designed by Charley Morgan as a racer-cruiser and first built in 1968.

The S2 6.8 is an American trailerable sailboat that was designed by Don Wennersten and Arthur Edmunds as a racer-cruiser and first built in 1976. The designation indicates the approximate length overall in meters.

The Seidelmann 25 is an American trailerable sailboat that was designed by Bob Seidelmann as a racer-cruiser and first built in 1977.

References

  1. 1 2 3 4 5 6 McArthur, Bruce (2020). "Mark 25 sailboat". sailboatdata.com. Archived from the original on 23 July 2021. Retrieved 25 July 2021.
  2. McArthur, Bruce (2021). "C&C Design 1961 - 2017". sailboatdata.com. Archived from the original on 1 March 2021. Retrieved 25 July 2021.
  3. 1 2 3 4 5 6 7 8 Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 356. International Marine/McGraw-Hill, 2010. ISBN   978-0-07-163652-0
  4. McArthur, Bruce (2021). "Ontario Yachts". sailboatdata.com. Archived from the original on 6 October 2020. Retrieved 25 July 2021.
  5. 1 2 3 Trimble, Nancy (February 1985). "New Boats - Mark 25". Yachting . Retrieved 25 July 2021.