Development | |
---|---|
Designer | Jacques de Ridder |
Location | Belgium |
Year | 1982 |
Builder(s) | ETAP Yachting |
Role | Cruiser |
Name | ETAP 23 |
Boat | |
Displacement | 3,320 lb (1,506 kg) |
Draft | 5.08 ft (1.55 m) with keel down |
Hull | |
Type | monohull |
Construction | fibreglass |
LOA | 24.20 ft (7.38 m) |
LWL | 19.00 ft (5.79 m) |
Beam | 8.20 ft (2.50 m) |
Engine type | outboard motor |
Hull appendages | |
Keel/board type | lifting keel |
Ballast | 1,036 lb (470 kg) |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
Sails | |
Sailplan | fractional rigged sloop |
Total sail area | 190.00 sq ft (17.652 m2) |
Racing | |
PHRF | 240 |
The ETAP 23 is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1982. [1] [2] [3]
The design was built by ETAP Yachting in Lokeren, Belgium between 1982 and 1989, but it is now out of production. [1] [3] [4]
The ETAP 23 is a recreational keelboat, built predominantly of foam-cored fibreglass, with wood trim. It has a fractional sloop rig, a raked stem, a plumb transom, a transom-hung rudder controlled by a tiller and a weighted bulb lifting keel. It displaces 3,320 lb (1,506 kg) and carries 1,036 lb (470 kg) of ballast. [1] [3]
The boat's construction renders it unsinkable. [3]
The boat has a draft of 5.08 ft (1.55 m) with the lifting keel extended and 2.60 ft (0.79 m) with it retracted, allowing operation in shallow water, or ground transportation on a trailer. [1] [3]
The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW) outboard motor for docking and manoeuvring, mounted in a stern well. [1] [3]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settee quarter berths in the main cabin along with a drop-leaf table. The galley is located on the port side, just aft of the bow cabin. The galley is equipped with a two-burner stove, an icebox and a sink. The head is located under the "V"-berth on the port side in the bow cabin. Cabin headroom is 53 in (130 cm). [1] [3]
The design has a PHRF racing average handicap of 240 and a hull speed of 5.8 kn (10.7 km/h). [3]
The boat was at one time supported by a class club, the ETAP Owners Association. [5]
In a 2010 review Steve Henkel wrote, "like other small ETAP sailboats, the Belgian-made 23 ... is double skinned, with foam between outside and aside layers of fiberglass. Best features: The foam sandwich construction helps keep the cabin dry and condensation free, as well as muffling noise. It also stiffens the hull structure and makes the boat unsinkable even when filled with water. (We watched at the Annapolis Sailboat Show in 1986 while the ETAP’s seacocks were opened and the boat gradually settled until water was knee-high over the cabin sole, at which point equilibrium was reached and any added water bailed in from outside simply ran out through the seacocks, Then the boat was keeled over to 65 degrees of heel, but popped right up when the hauling lines were released.) The whole boat is extremely well-finished in mahogany and/or teak with polished brass hardware. The wide beam helps to create more usable space ... A ballasted vertical-retracting keel keeps minimum draft low while providing good lowered depth for going upwind. An outboard well is conveniently located in the cockpit near the helm station. Worst features: Price even of well-used boats is high. In this case, you may get what you pay for." [3]
The Clipper 21, also called the Clipper Marine 21 and the Clipper Mark 21, is an American trailerable sailboat that was designed by William Crealock and first built in 1971.
The ETAP 20 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1975.
The ETAP 22i is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1983.
The ETAP 23iL is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.
The ETAP 28i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1988.
The ETAP 30 is a Belgian sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.
The ETAP 30i is a Belgian sailboat that was designed by French designers Mortain & Mavrikios, as a cruiser and first built in 1995.
The ETAP 32i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1992.
The ETAP 39s is a Belgian sailboat that was designed by Slovenian designers J&J Design, as a cruiser and first built in 1998.
The ETAP 35i is a Belgian sailboat that was designed as a cruiser and first built in 1992.
The ETAP 34s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1997.
The ETAP 24i is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 1999.
The ETAP 32s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 2003.
The ETAP 37s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 2003.
The ETAP 26s is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 2005.
The ETAP 48Ds is a Belgian sailboat that was designed by Marc-Oliver von Ahlen, with the interior designed by Stile Bertone, as a cruiser and first built in 2009.
The ETAP 30cq is a Belgian sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 2010. The interior was designed by Stile Bertone.
The Freedom 24 is an American trailerable sailboat that was designed by William H. Tripp, III as a racer-cruiser and first built in 1994.
The Venture 22 is an American trailerable sailboat that was designed by Roger MacGregor as a cruiser and first built in 1968.
The Venture 222 is an American trailerable sailboat that was designed by Roger MacGregor as a cruiser and first built in 1971.