Development | |
---|---|
Designer | John L. Watkinson |
Location | United Kingdom |
Year | 1968 |
No. built | more than 2,000 |
Builder(s) | Honnor Marine Classics, Churchouse Boats, Drascombe Boats |
Name | Drascombe Lugger |
Boat | |
Displacement | 600 lb (272 kg) |
Draft | 4.00 ft (1.22 m), centreboard down |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 18.75 ft (5.72 m) |
LWL | 14.50 ft (4.42 m) |
Beam | 6.25 ft (1.91 m) |
Engine type | well-mounted outboard motor |
Hull appendages | |
Keel/board type | centreboard |
Ballast | 100 lb (45 kg) |
Rudder(s) | folding rudder |
Rig | |
Rig type | Cutter rigged yawl |
Sails | |
Sailplan | Gunter rigged |
Total sail area | 132 sq ft (12.3 m2) |
The Drascombe Lugger is a British trailerable sailboat that was designed by John L. Watkinson and first built in 1968. [1]
The Drascombe Lugger design is the basis of a large range of similar Drascombe boats with different hull, cabin and rig configurations. [2]
The design is built by Honnor Marine Classics and also by Churchouse Boats, now called Drascombe Boats in the United Kingdom. Production started in 1968, with more than 2,000 boats completed and the design remains in production. [1] [3] [4] [5]
The boat was designed by Watkinson, who was a former Royal Navy officer. In the early 1960s he wanted to build a small boat for his own family use. His design goals were for a day sailer with trailerability, that would be stable and safe, but still exciting to sail for experienced sailors. [2]
The prototype was built of wood on a farm in Drascombe Barton. The design was based upon the fishing boats used on England's northeastern coast, which trace their lineage back to the Viking longships. The first boats had a lug rig, for which it was named, later switching to a Gunter rig. [2] [6]
The design was put into production, made from fiberglass and proved a commercial success. Boats have been built commercially on a production line and also by amateur builders. Plans for home construction have not been available since the death of the designer in 1997. [2]
The Drascombe Lugger is a recreational open sailboat, built predominantly of fiberglass, with wooden spars and trim. It is a Gunter rigged yawl with and a boomkin for the mizzen sail. It features a spooned raked stem, a raised transom, an internally mounted fold-up rudder controlled by a tiller and a centreboard. It can be equipped with a bowsprit and cutter rig. It displaces 600 lb (272 kg) and carries 100 lb (45 kg) of ballast in the steel centreboard. [1]
The boat has a draft of 4.00 ft (1.22 m) with the centreboard extended and 0.83 ft (0.25 m) with it retracted, allowing beaching or ground transportation on a trailer. [1]
For docking and maneuvering, the boat is normally fitted with a small outboard motor, located in an aft well. [1]
David Pyle and David Derrick completed a voyage from England to Australia during 1969 and 1970 in the Drascombe Lugger Hermes. The boat was a standard production model with a raised foredeck and other minor modifications built at Kelly and Hall's boatyard in Newton Ferrers, by John and Douglas Elliott. [7] [8]
From 1978 and 1984, Webb Chiles almost completed an open boat circumnavigation of the world in his two Luggers Chidiock Tichborne I and Chidiock Tichborne II. He started the trip in California with Chidiock I and crossed the Pacific Ocean, the Indian Ocean and entered the Red Sea. In the Pacific near Vanuatu, the boat capsized in heavy weather and then drifted for two weeks, as he was unable to bail it out. After becoming damaged in the Red Sea the boat was seized by the Saudi Arabian government and Chiles was arrested on suspicion of being a spy. After being released Chiles had a new Lugger, Chiddiock II, shipped to him in Egypt and he restarted the voyage. He sailed back south to intercept his previous track and then turned towards the Suez Canal and passed into the Mediterranean Sea and into the Atlantic to La Palma in the Canary Islands. Leaving the boat there to visit Tenerife, he returned to find that the boat had capsized on her mooring during a storm. With the loss of much of his gear, Chiles decided to end his open boat circumnavigation attempt. [9] [10]
A review in Small Boats Magazine by Audrey and Kent Lewis stated, "We think the Drascombe Lugger is one [of] the most versatile small boats ever built." [6]
A 2008 review by John Kretschmer in Sailing Magazine, noted the boat's stability and ability to deal with high winds by reducing sail. He wrote, "Luggers have pleasant lines, with a nice sheer and comfortable seating. A bronze stemhead, wood gunwales, Sitka spruce mast and a set of belaying pins at the base of the mast give the boat a bit of a salty air." He concluded, "Should I say you really shouldn't take off to Tahiti on your Lugger? Well, you shouldn't. They are unballasted, open boats. But they come with such good manners and are endowed with so much enjoyment you may find yourself heading that way. Don't say I didn't warn you." [11]
Related design
Similar sailboats
The word Drascombe is a trademark that was first registered by John Watkinson who applied it to a series of sailing boats which he designed and built in the period 1965–79 and sold in the United Kingdom (UK). They comprised the Coaster, Cruiser Longboat, Dabber, Drifter, Driver, Gig, Launch, Longboat, Lugger, Peterboat, Scaffie, Scaith and Skiff, together with a few other one-offs. They have wide and deep cockpits, adaptable boomless rigs and high bulwarks.
The Sandpiper 565 is trailerable sailboat that was designed by the British-based Portuguese naval architect Leonardo da Costa Sayago and first built in 1972. The design is out of production.
The Hartley TS16 is an Australian trailerable sailboat that was designed in 1956 by New Zealander Richard Hartley as a day sailer and which later became a one design racer.
The Sanibel 18 is an American trailerable sailboat, that was designed by Charles Ludwig, first built in 1982 and named for the Floridian town and island.
The Siren 17 is a Canadian trailerable sailboat, that was designed by Hubert Vandestadt as trailer sailer and first built in 1974.
The Buccaneer 200 is an American trailerable sailboat, that was designed by Alan Payne and first built in 1974.
The Paceship 20 is a Canadian sailing dinghy, that was designed by Cuthbertson & Cassian and first built in 1970.
The MacGregor 25 is an American trailerable sailboat that was designed by Roger MacGregor and first built in 1973. From the start of production until 1980, it was sold as the Venture 25.
The Naiad 18 is a Canadian trailerable sailboat, that was designed by Mark Ellis, first built from 1984 to 1986, and named for the mythological water sprites.
The Catalina 18, formerly known as the Capri 18, is a trailerable American sailboat that was designed by Frank Butler and Gerry Douglas and first built in 1985.
The Hunter 18.5 is an American trailerable sailboat that was designed by the Hunter Design Team as a cruising sailboat and first built in 1987.
The Hunter 19-1 is an American trailerable sailboat that was designed as a day sailer and small cruising sailboat by the Hunter Design Team and first built in 1981.
The Hunter 19-2 is an American trailerable sailboat that was designed as a day sailer and small cruising sailboat by the Hunter Design Team and first built in 1993.
The Hunter 19 (Europa) is a British sailboat that was designed by Oliver Lee and first built in 1972.
The Com-Pac Sunday Cat is an American trailerable sailboat that was designed by Clark Mills, who had previously designed the Optimist.
The Dawson 26 is an American trailerable sailboat that was designed by Robert Finch as a cruiser and first built in 1973.
The Skunk 11 is a Canadian utility dinghy that can be rowed, used as a motorboat, fishing boat or as a sailing dinghy. It was designed by Hubert Vandestadt and first built in 1969.
The Drascombe Scaffie, now marketed as the Devon Scaffie, is a British trailerable sailboat that was designed by John L. Watkinson and first built in 1978. The modern Scaffie is based upon a traditional British boat design that dates back several hundred years.
The Typhoon 18 is a family of American trailerable sailboats that was designed by Carl Alberg as day sailers and cruisers, first built in 1967.
The Jeanneau Arcachonnais is a French trailerable sailboat that was designed as a day sailer and pocket cruiser, first built in 1969.