Starwind 223

Last updated

Starwind 223
Starwind 223 sailboat Tymoff 2770.jpg
Development
Designer Cortland Steck
Location United States
Year1982
Builder(s) Starwind
Rebel Industries
NameStarwind 223
Boat
Displacement 2,435 lb (1,104 kg)
Draft 5.00 ft (1.52 m) with centerboard down, 1.83 ft (0.56 m) with centerboard up
Hull
Type Monohull
Construction Fiberglass
LOA 22.25 ft (6.78 m)
LWL 19.33 ft (5.89 m)
Beam 8.50 ft (2.59 m)
Engine type Outboard motor
Hull appendages
Keel/board type Centerboard
Ballast700 lb (318 kg)
Rudder(s)transom-mounted rudder
Rig
Rig type Bermuda rig
I foretriangle height22.50 ft (6.86 m)
J foretriangle base7.67 ft (2.34 m)
P mainsail luff25.00 ft (7.62 m)
E mainsail foot10.75 ft (3.28 m)
Sails
Sailplan Fractional rigged sloop
Mainsail area134.38 sq ft (12.484 m2)
Jib/genoa area86.29 sq ft (8.017 m2)
Total sail area220.66 sq ft (20.500 m2)
Racing
PHRF 264 (average)

The Starwind 223 is an American trailerable sailboat, that was designed by Cortland Steck and first built in 1984. [1] [2] [3] [4]

Contents

Production

The design was built by the Starwind division of Wellcraft Marine Corp in the United States from 1982 to 1984 and then by Rebel Industries near Sarasota, Florida from 1985 to 1987. [1] [3] [4] [5]

Design

Starwind 223 Starwind 223 sailboat Tymoff 2771.jpg
Starwind 223

The Starwind 223 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop, a raked stem, a reverse transom, a transom-hung rudder controlled by a tiller and a retractable centerboard keel. It displaces 2,435 lb (1,104 kg) and carries 700 lb (318 kg) of ballast. [1] [3] [4]

The boat has a draft of 5.00 ft (1.52 m) with the centerboard extended and 1.83 ft (0.56 m) with it retracted, allowing ground transportation on a trailer. [1] [3] [4]

The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW) outboard motor for docking and maneuvering. [1] [3] [4]

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settee berths in the main cabin. The galley is located on the port side just aft of the bow cabin and is equipped with a sink. The head is located in the bow cabin under the "V"-berth. Cabin headroom is 56 in (142 cm). [3]

The design has a PHRF racing average handicap of 264 with a high of 261 and low of 270. It has a hull speed of 5.89 kn (10.91 km/h). [3] [6]

Operational history

In a 2010 review Steve Henkel wrote, "This attractive design ... has plenty of nice features ... and not a lot of faults. Best features: She has the biggest beam and hence the highest Space Index of her competitors. Marks of quality include a well-molded hull of mat, roving, and Coremat, with no chopped strand, a teak-and-holly cabin sole, cedar-lined hanging locker, anchor locker on deck, with a separate rope locker to help avoid tangle, a big Lexan translucent forward hatch for ventilation over the head, a sea hood over the main hatch to help provide watertight integrity, and a dinette table that attaches to either galley below or cockpit on deck. Settee and quarter berths are a generous 7' 9" long, and the wood-bottomed after cushions can be placed between the settees to make a cozy 6' 6" by 4' 4" double 'honeymoon' berth. Worst features: The inboard chainplates make it less easy to go forward on deck, but provide a tighter sheeting angle for the jib, so to most sailors the extra performance upwind is worth the slight inconvenience." [3]

See also

Similar sailboats

Related Research Articles

<span class="mw-page-title-main">Hunter 23</span> Sailboat class

The Hunter 23 is an American trailerable sailboat, that was designed by Hunter Marine and first built in 1985.

<span class="mw-page-title-main">CS 22</span> Sailboat class

The CS 22 is a Canadian trailerable sailboat, that was designed by John A. Butler and first built in 1971. The design is out of production.

<span class="mw-page-title-main">O'Day 23</span> Sailboat class

The O'Day 23 is a series of American trailerable sailboats, that were designed by C. Raymond Hunt Assoc. and first built in 1972.

<span class="mw-page-title-main">Precision 23</span> Sailboat class

The Precision 23 is an American trailerable sailboat, that was designed by Jim Taylor.

<span class="mw-page-title-main">Spindrift 22</span> Sailboat class

The Spindrift 22 is an American trailerable sailboat that was designed by Jim Taylor Yacht Designs and first built in 1982.

The Hunter 20 is an American trailerable sailboat that was designed by Cortland Steck as daysailer and small cruiser and first built in 1983.

The Hunter 22 is an American trailerable sailboat that was designed by the Hunter Design Team and first built in 1981.

The Pearson Electra is an American trailerable sailboat that was designed by Carl Alberg as a Midget Ocean Racing Club (MORC) racer and first built in 1960.

<span class="mw-page-title-main">Seaward 22</span> Sailboat class

The Seaward 22 is an American trailerable sailboat that was designed by Nick Hake and first built in 1985.

The Captiva 240 is an American trailerable sailboat that was first built in 1984. The boat is a development of the O.H. Rodgers-designed Rodgers 24 racer, modified for use as a racer-cruiser by Walter Scott by giving it a new keel and sailing rig.

The Coronado 23, also called the Sailcrafter 23, is an American trailerable sailboat that was designed by William Crealock as cruiser-racer and first built in 1969.

The D&M 22 is an American trailerable sailboat that was designed by Sparkman & Stephens as an International Offshore Rule Quarter Ton class racer and first built in 1971. The boat is Sparkman & Stephens' design #2090.

The Gloucester 22 is an American trailerable sailboat that was designed by Stuart Windley and Harry R. Sindle as a cruiser and first built in 1983.

The Bahia 22, also called the Bahia 23, is a French trailerable sailboat that was designed by Philippe Harlé as a pocket cruiser and first built in 1983.

The S2 6.8 is an American trailerable sailboat that was designed by Don Wennersten and Arthur Edmunds as a racer-cruiser and first built in 1976. The designation indicates the approximate length overall in meters.

The S2 7.0 is an American trailerable sailboat that was designed by Arthur Edmunds as a cruiser and first built in 1975. The designation indicates the approximate length overall in meters.

The Seafarer 24 is an American trailerable sailboat that was designed by McCurdy & Rhodes as a cruiser and first built in 1974.

The Slipper 17 is an American trailerable sailboat that was designed by Nick Hake as a pocket cruiser and first built in 1981.

The Starwind 19, Starwind 190 and Spindrift 19 are a family of American trailerable sailboats that were designed by Jim Taylor Yacht Designs as cruiser-racers and first built in 1982.

The Starwind 22 is an American trailerable sailboat that was designed by Halsey Herreshoff as a cruiser and first built in 1982.

References

  1. 1 2 3 4 5 McArthur, Bruce (2022). "Starwind 223 sailboat specifications and details". sailboatdata.com. Archived from the original on 28 February 2022. Retrieved 25 July 2018.
  2. McArthur, Bruce (2022). "Cortland Steck". sailboatdata.com. Archived from the original on 23 May 2021. Retrieved 25 July 2018.
  3. 1 2 3 4 5 6 7 8 Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 208. International Marine/McGraw-Hill, 2010. ISBN   978-0-07-163652-0
  4. 1 2 3 4 5 Sea Time Tech, LLC (2022). "Starwind 223". sailboat.guide. Archived from the original on 28 February 2022. Retrieved 28 February 2022.
  5. McArthur, Bruce (2022). "Starwind". sailboatdata.com. Archived from the original on 27 February 2022. Retrieved 28 February 2022.
  6. InterVisionSoft LLC (2018). "Sailboat Specifications for Starwind 223". Sailing Joy. Archived from the original on 25 July 2018. Retrieved 2 July 2018.