ETAP 20

Last updated

ETAP 20
Development
Designer E. G. van de Stadt
Location Belgium
Year1975
No. built1,000
Builder(s) ETAP Yachting
Role Cruiser
NameETAP 20
Boat
Displacement 1,874 lb (850 kg)
Draft 3.74 ft (1.14 m) with keel down
Hull
Type monohull
Construction fibreglass
LOA 19.85 ft (6.05 m)
LWL 17.06 ft (5.20 m)
Beam 7.55 ft (2.30 m)
Engine type outboard motor
Hull appendages
Keel/board type lifting keel
Ballast441 lb (200 kg)
Rudder(s)transom-mounted rudder
Rig
Rig type Bermuda rig
Sails
Sailplan fractional rigged sloop
Mainsail area10.40 m2 (111.9 sq ft)
Jib/genoa area7.00 m2 (75.3 sq ft)
Spinnaker area22.00 m2 (236.8 sq ft)
Upwind sail area17.40 m2 (187.3 sq ft)
Downwind sail area32.40 m2 (348.8 sq ft)

The ETAP 20 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1975. [1] [2] [3] [4]

Contents

Production

The design was built by ETAP Yachting in Lokeren, Belgium between 1975 and 1992, with 1,000 boats completed, but it is now out of production. [1] [3] [5]

Design

The ETAP 20 is a recreational keelboat, built predominantly of fibreglass, with wood trim. It has a fractional sloop rig, a raked stem, a plumb transom, a kick-up transom-hung rudder controlled by a tiller and a weighted bulb lifting keel. The keel is raised and lowered with a worm gear operated from on deck. It displaces 1,874 lb (850 kg) and carries 441 lb (200 kg) of ballast. [1] [3]

The boat has closed cell foam sandwich compartments that render it unsinkable and also will float it level, even when the boat is full of water. [3]

The boat has a draft of 3.74 ft (1.14 m) with the lifting keel extended and 1.57 ft (0.48 m) with it retracted, allowing operation in shallow water, or ground transportation on a trailer. [1] [3]

The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW) outboard motor for docking and manoeuvring. [1] [3]

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settee quarter berths in the main cabin along with a drop-leaf table. The galley is located on both sides just aft of the bow cabin. The galley is equipped with a single-burner stove and a sink. The head is located under the "V"-berth in the bow cabin. Cabin headroom is 48 in (120 cm). [1] [3]

For downwind sailing the design may be equipped with a spinnaker of 22.00 m2 (236.8 sq ft). [4]

The design has a hull speed of 5.5 kn (10.2 km/h). [3]

Operational history

The boat was at one time supported by a class club, the ETAP Owners Association. [6]

In a 2009 review Yachting Monthly described its as, "a stout and safe little 1980s starter boat designed by E G Van de Stadt, the Etap 20 sails nicely and handles rather like a big dinghy. She has a simple, open-plan interior with four berths and reasonable headroom under a raised, semi-flush deck. The lifting keel box takes up remarkably little room, yet she has enough ballast to right herself following a knockdown. There is space for a simple cooker and a chemical toilet stows under the forward bunks. Stowage is somewhat limited. She is easily trailed and can be rigged and launched in half an hour." [7]

In a 2010 review Steve Henkel wrote, "this nicely conceived 20-footer was introduced in Europe in 1980 and in the U.S. in 1985, by Belgian builder ETAP (acronym for Electro Technical Apparatus, a diversified manufacturer of lighting, aluminum, and fiberglass products, which entered the boatbuilding business in 1970). Best features: Like the firm's other small sailboats (including the ETAP 29i and ETAP 23), the ETAP 20 is built to a very high standard, and is unsinkable ... Designated stowage space for sails and outboard engine, and a stowable dining-and-chart table, are nice touches ... The lifting keel with bulb at bottom keeps center of gravity low when lowered and gives easy trailering when raised using self-locking worm drive, operated from on deck. Worst features: None to speak of." [3]

See also

Related Research Articles

The Columbia 24 Contender is an American trailerable sailboat that was designed by Joseph McGlasson in conjunction with Columbia Yachts and first built in 1963.

The Clipper 21, also called the Clipper Marine 21 and the Clipper Mark 21, is an American trailerable sailboat that was designed by William Crealock and first built in 1971.

The Dehler 22 is a West German trailerable sailboat that was designed by E. G. van de Stadt and first built in 1983. It is van de Stadt's design number 374.

The Dehler 25 is a German trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1984.

The Ensenada 20 is an American trailerable sailboat that was designed by Lyle C. Hess as a cruiser and first built in 1972.

The ETAP 22i is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1983.

The ETAP 23 is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1982.

The ETAP 23iL is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.

The ETAP 28i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1988.

The ETAP 30 is a Belgian sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.

The ETAP 32i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1992.

The ETAP 26 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1982.

The ETAP 38i is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1989.

<span class="mw-page-title-main">ETAP 34s</span> Sailboat class

The ETAP 34s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1997.

The ETAP 24i is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 1999.

The ETAP 26s is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 2005.

The ETAP 30cq is a Belgian sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 2010. The interior was designed by Stile Bertone.

The Gloucester 19 is an American trailerable sailboat that was designed by Stuart Windley and Harry R. Sindle as a day sailer and first built in 1983.

The Venture 22 is an American trailerable sailboat that was designed by Roger MacGregor as a cruiser and first built in 1968.

The Venture 222 is an American trailerable sailboat that was designed by Roger MacGregor as a cruiser and first built in 1971.

References

  1. 1 2 3 4 5 6 McArthur, Bruce (2020). "ETAP 20 sailboat". sailboatdata.com. Archived from the original on 23 March 2021. Retrieved 23 March 2021.
  2. McArthur, Bruce (2021). "E. G. Van de Stadt 1910 - 1999". sailboatdata.com. Archived from the original on 11 March 2021. Retrieved 23 March 2021.
  3. 1 2 3 4 5 6 7 8 9 Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 98. International Marine/McGraw-Hill, 2010. ISBN   978-0-07-163652-0
  4. 1 2 Etap Yachting (11 January 2009). "ETAP 20" (PDF). etapowners.org.uk. Archived from the original (PDF) on 14 June 2018. Retrieved 15 March 2021.
  5. McArthur, Bruce (2021). "Etap Yachting". sailboatdata.com. Archived from the original on 23 March 2021. Retrieved 23 March 2021.
  6. McArthur, Bruce (2021). "Etap Owners Association". sailboatdata.com. Archived from the original on 23 March 2021. Retrieved 23 March 2021.
  7. "Etap 20". Yachting Monthly. 5 August 2009. Archived from the original on 23 October 2020. Retrieved 23 March 2021.