Development | |
---|---|
Designer | Bill Higgins and Don Ansley |
Location | United States |
Year | 1976 |
No. built | 500 |
Builder(s) | Stiletto Catamarans |
Name | Stiletto 27 |
Boat | |
Boat weight | 1,100 lb (499 kg) |
Draft | 4.00 ft (1.22 m), daggerboards down |
Hull | |
Type | Multihull |
Construction | Fiberglass |
LOA | 26.83 ft (8.18 m) |
LWL | 24.00 ft (7.32 m) |
Beam | 13.83 ft (4.22 m) |
Engine type | outboard motor |
Hull appendages | |
Keel/board type | daggerboard |
Ballast | none |
Rudder(s) | dual transom-mounted rudders |
Rig | |
Rig type | Bermuda rig |
Sails | |
Sailplan | Fractional rigged sloop |
Mainsail area | 230 sq ft (21 m2) |
Jib/genoa area | 159 sq ft (14.8 m2) |
Spinnaker area | 750 sq ft (70 m2) |
Total sail area | 336 sq ft (31.2 m2) |
The Stiletto 27 is an American trailerable catamaran sailboat that was designed by Bill Higgins and Don Ansley as a racer/cruiser and first built in 1976. [1] [2] [3] [4]
The design was originally marketed by the manufacturer just as the Stiletto, but later became the Stiletto 27 to differentiate it from the later 1983 Stiletto 30 and 1985 Stiletto 23 designs. [1]
The design was built by Stiletto Catamarans (a division of Force Engineering) in the United States. A total of 500 were built, but it is now out of production. [1] [4] [5]
The Stiletto 27 is a recreational catamaran, built predominantly of fiberglass, with an epoxy and Nomex core. It has a fractional sloop rig with a full-roach mainsail, raked stems, slightly reverse transoms, transom-hung rudders controlled by a tiller and a single, centrally-mounted daggerboard keel. [1] [4]
The racing versions are heavier and incorporate extra sails, sheet winches and a 6:1 downhaul. A 750 sq ft (70 m2) spinaker and pivoting centerboard are optional for both cruising and racing versions. [4]
The boat has a draft of 4.00 ft (1.22 m) with the daggerboard extended and 0.75 ft (0.23 m) with it retracted, allowing beaching or ground transportation on a trailer. For ground transport the design collapses to a width of 7.95 ft (2.42 m). [1]
Both hulls have double berths, while the port hull houses the portable head. The starboard hull houses the galley. Further sleeping space can be created with the use of a deck tent. [4]
Access to each hull is via the raised Lexan skylight, which are slid forward for access. Additional portlights are in the hull sides, two per hull. The boat is normally fitted with a small outboard motor for docking and maneuvering. [4]
Roller furling headsails are optional. Other factory options include jiffy reefing, a halyard winch, jib sheet winches and a reduced-area cruising mainsail. [4]
The design has a hull speed of 6.56 kn (12.15 km/h). [6] [7] [8]
In an account in Sail magazine published in May 1982, writer Robby Robinson describes the design's performance, "I was pleasantly surprised at Stiletto’s maneuverability. She is heavy enough (1,100 pounds) to have some carry, and the centerline daggerboard helps her spin quite nimbly from one tack to the other. Her high aspect rudders stall somewhat, especially if you're attempting to bear off without much way on. Still, she responds to sheet adjustment and rudder wriggling better than most boats, and her rapid acceleration is a real plus in tight quarters." [9]
Similar sailboats
The Banshee, sometimes called the Banshee 13, is an American sailing dinghy that was designed by Richard L. Reid as a one-design racer and first built in 1969.
The Bombardier Invitation is a Canadian sailing dinghy that was designed by Bombardier Research to compete in the same market with the Laser, as a one-design racer. It was first built in 1973.
The Nacra F18 Infusion is a Dutch Formula 18 catamaran sailing dinghy that was designed by Morrelli & Melvin, Vink, Larsen, Young as a one-design racer and first built in 2008.
The MacGregor 26 is an American trailerable sailboat, that was designed by Roger MacGregor and first built in 1986, with production ending in 2013.
The C&C 35, also called the Redwing 35, is a Canadian sailboat, that was designed by Cuthbertson & Cassian and first built in 1969.
The C&C 27 is a family of Canadian sailboats, that was designed by Robert W. Ball and first built in 1970. The design is out of production.
The Topaz Vibe is a British sailing dinghy designed by Ian Howlett and Rob White. Built by Topper International, it was first introduced in 2006. There are two models, the Vibe and the Vibe X, with the latter carrying larger sails. The Vibe is a World Sailing Learn to Sail class.
The Hobie Getaway is an American catamaran sailboat, that was designed by Hobie Cat and first built in 2001.
The Martin 16 is a Canadian trailerable sailboat, that was designed by Don Martin of Vancouver, British Columbia, specifically as a boat for disabled sailors. It was first built in 1995.
The Sabre 28 is a series of American sailboats, designed by Roger Hewson and first built in 1971.
The Viper 640 is an American trailerable sailboat, that was designed by Brian Bennett for racing and first built in 1996.
The F-31 Sport Cruiser is a family of American trailerable trimaran sailboats that was designed by New Zealander Ian Farrier and first built in 1991.
The Hunter 280 is an American sailboat that was designed by the Hunter Design Team in conjunction with Rob Mazza, as a cruising boat and first built in 1995.
The Hunter 430 is an American sailboat that was designed by the Hunter Design Team as a cruising boat and first built in 1995.
The Seidelmann 245 is an American trailerable sailboat that was designed by Bob Seidelmann as a cruiser and first built in 1981. The designer was well-known as a champion one design sailor and also as a sailmaker.
The Freedom 25 is an American sailboat that was designed by Gary Hoyt as a single-handed racer-cruiser and first built in 1980.
The Capri Cyclone, also referred to as the Cyclone 13 or just the Cyclone, is an American sailing dinghy that was designed by Frank V. Butler as a one-design racer and first built in 1970.
The Nacra 20 is a catamaran sailing dinghy that was designed by Gino Morrelli and Pete Melvin as a one-design racer and first built in 1998.
The Nacra 5.2 is an American catamaran sailing dinghy that was designed by Tom Roland as a one-design racer and first built in 1975. Other that the small production run Nacra 36, the Nacra 5.2 was the first Nacra brand boat and established its reputation.
The Prindle 18 is an American catamaran sailing dinghy that was designed by Geoffrey Prindle as a racer and first built in 1977.