ETAP 23iL

Last updated

ETAP 23iL
Development
Designer Jacques de Ridder
Location Belgium
Year1994
No. built110
Builder(s) ETAP Yachting
Role Cruiser
NameETAP 23iL
Boat
Boat weight 3,420 lb (1,551 kg)
Draft 4.82 ft (1.47 m) with the keel down
Hull
Type monohull
Construction glassfibre
LOA 25.50 ft (7.77 m)
LWL 20.31 ft (6.19 m)
Beam 8.18 ft (2.49 m)
Engine type outboard motor
Hull appendages
Keel/board type lifting keel
Ballast1,035 lb (469 kg)
Rudder(s)transom-mounted rudder
Rig
Rig type Bermuda rig
I foretriangle height23.80 ft (7.25 m)
J foretriangle base8.10 ft (2.47 m)
P mainsail luff26.12 ft (7.96 m)
E mainsail foot9.00 ft (2.74 m)
Sails
Sailplan fractional rigged sloop
Mainsail area151 sq ft (14.0 m2)
Jib/genoa area62 sq ft (5.8 m2)
Gennaker area295 sq ft (27.4 m2)
Other sails Genoa: 160 sq ft (15 m2)
Solent: 110 sq ft (10 m2)
Storm jib: 28 sq ft (2.6 m2)
Upwind sail area311 sq ft (28.9 m2)
Downwind sail area446 sq ft (41.4 m2)
  ETAP 23i

The ETAP 23iL is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994. [1] [2] [3] [4]

Contents

Production

The design was built by ETAP Yachting in Belgium between 1994 and 1999, with 100 boats completed, but it is now out of production. [1] [2] [5] [6]

Design

The ETAP 23iL is a recreational keelboat, built predominantly of polyester glassfibre-foam sandwich construction, with wood trim. The use of foam sandwich construction makes the boat unsinkable. It has a 7/8 fractional sloop masthead sloop rig with aluminum spars, a deck-stepped mast, wire standing rigging and a single set of swept spreaders. The hull has a slightly raked stem, a plumb transom, a transom-hung rudder controlled by a tiller and a lifting keel with a weighted bulb. It displaces 3,420 lb (1,551 kg) and carries 1,035 lb (469 kg) of cast iron ballast. [1] [2]

The boat has a draft of 4.82 ft (1.47 m) with the lifting extended and 2.30 ft (0.70 m) with it retracted, allowing beaching or ground transportation on a trailer. [1] [2]

The boat is normally fitted with a small 6 to 9 hp (4 to 7 kW) outboard motor for docking and manoeuvring. [1] [2]

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settees in the main cabin. The galley is located on the port side just aft of the bow cabin. The galley is equipped with a two-burner stove, an icebox and a sink. The head is located in the bow cabin on the port side, under the "V"-berth. The fresh water tank has a capacity of 13.2 U.S. gallons (50 L; 11.0 imp gal) [1] [2]

For sailing downwind the design may be equipped with an asymmetrical spinnaker of 295 sq ft (27.4 m2). It has a hull speed of 6.04 kn (11.19 km/h). [2]

Operational history

The boat was at one time supported by a class club, the ETAP Owners Association. [7]

A review in Boat Specs, notes "the Lifting keel version features an appendage configuration without compromise between draft and performance. Only drawback: some space is taken inside by the keel." [2]

A review in the Yacht Charter Guide described the design, "the ETAP 23iL is a very safe, fast seagoing yacht with a long waterline. It can sail superbly close to the wind and, in the hands of an experienced crew, it handles easily even in the roughest conditions. This yacht features a regatta deck which allows every manoeuvre - even reefing - to be carried out from the cockpit. Below deck there's a comfortable, luxuriously finished and almost condensation-free cabin with ample stowage space and a very convenient navigation area with a chart table and instruments' panel. The lifting keel allows the ETAP 23iL to be trailered easily..." [8]

See also

Related Research Articles

The Dehler 25 is a German trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1984.

The ETAP 20 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1975.

The ETAP 22i is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1983.

The ETAP 23 is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1982.

The ETAP 28i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1988.

The ETAP 30 is a Belgian sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.

The ETAP 30i is a Belgian sailboat that was designed by French designers Mortain & Mavrikios, as a cruiser and first built in 1995.

The ETAP 32i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1992.

The ETAP 39s is a Belgian sailboat that was designed by Slovenian designers J&J Design, as a cruiser and first built in 1998.

The EATP 22 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1974.

The ETAP 23i is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1982.

The ETAP 26 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1982.

The ETAP 38i is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1989.

The ETAP 35i is a Belgian sailboat that was designed as a cruiser and first built in 1992.

The ETAP 21i is a Belgian trailerable sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1997.

ETAP 34s Sailboat class

The ETAP 34s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1997.

The ETAP 24i is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 1999.

The ETAP 26s is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 2005.

The ETAP 48Ds is a Belgian sailboat that was designed by Marc-Oliver von Ahlen, with the interior designed by Stile Bertone, as a cruiser and first built in 2009.

The Seafarer 22 is an American trailerable sailboat that was designed by McCurdy & Rhodes as a cruiser and first built in 1976.

References

  1. 1 2 3 4 5 6 McArthur, Bruce (2020). "ETAP 23IL sailboat". sailboatdata.com. Archived from the original on 27 March 2021. Retrieved 27 March 2021.
  2. 1 2 3 4 5 6 7 8 "Etap 23iL Lifting keel". Boat-Specs.com. 2020. Archived from the original on 27 March 2021. Retrieved 27 March 2021.
  3. McArthur, Bruce (2021). "Jacques de Ridder". sailboatdata.com. Archived from the original on 16 January 2021. Retrieved 27 March 2021.
  4. "Jac de Ridder Yacht Design". Boat-Specs.com. 15 March 2020. Archived from the original on 27 March 2021. Retrieved 27 March 2021.
  5. McArthur, Bruce (2021). "Etap Yachting". sailboatdata.com. Archived from the original on 23 March 2021. Retrieved 27 March 2021.
  6. "Etap". Boat-Specs.com. 2020. Archived from the original on 26 March 2021. Retrieved 27 March 2021.
  7. McArthur, Bruce (2021). "Etap Owners Association". sailboatdata.com. Archived from the original on 23 March 2021. Retrieved 27 March 2021.
  8. "ETAP 23iL". Yacht Charter Guide. Archived from the original on 27 March 2021. Retrieved 27 March 2021.