Development | |
---|---|
Designer | Robert Tucker |
Location | Canada |
Year | 1971 |
Builder(s) | Ouyang Boat Works |
Role | Day sailer-cruiser |
Name | Matilda 20 |
Boat | |
Displacement | 1,550 lb (703 kg) |
Draft | 4.16 ft (1.27 m) with keel down |
Hull | |
Type | monohull |
Construction | fibreglass |
LOA | 19.50 ft (5.94 m) |
LWL | 16.33 ft (4.98 m) |
Beam | 7.92 ft (2.41 m) |
Engine type | outboard motor |
Hull appendages | |
Keel/board type | lifting keel |
Ballast | 300 lb (136 kg) |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 23.50 ft (7.16 m) |
J foretriangle base | 8.00 ft (2.44 m) |
P mainsail luff | 20.80 ft (6.34 m) |
E mainsail foot | 8.00 ft (2.44 m) |
Sails | |
Sailplan | masthead sloop]] |
Mainsail area | 83.20 sq ft (7.730 m2) |
Jib/genoa area | 94.00 sq ft (8.733 m2) |
Total sail area | 177.20 sq ft (16.462 m2) |
Racing | |
PHRF | 276 |
The Matilda 20 is a trailerable sailboat that was designed by Robert Tucker as a daysailer and a cruiser and first built in 1971. [1] [2] [3]
The design was built by Ouyang Boat Works in Canada, between 1971 and about 1979, but it is now out of production. [1] [3] [4]
Other versions of the boat were built from plywood with a hard-chined hull and a fractional rigged sloop configuration were built by other companies in Australia, the United Kingdom and South Africa. [3]
The Matilda 20 built by Ouyang Boat Works is a recreational keelboat, with a round-bilge hull constructed predominantly of fibreglass, with wooden trim. It has a masthead sloop rig, a raked stem, an angled transom, a transom-hung rudder controlled by a tiller and a lifting keel with a weighted bulb. The boat displaces 1,550 lb (703 kg) and carries 300 lb (136 kg) of ballast. [1] [3]
The boat has a draft of 4.16 ft (1.27 m) with the lifting keel extended and 9 in (23 cm) with it retracted, allowing operation in shallow water, beaching or ground transportation on a trailer. [1] [3]
The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW) outboard motor for docking and manoeuvring. [1] [3]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two quarter berths aft, under the cockpit sides. The galley is located on the starboard side just aft of the bow cabin. The galley is L-shaped and is equipped with a two-burner stove, icebox and a sink. The head is located just aft of the bow cabin on the port side. Access to the bow cabin is through the head. Cabin headroom is 50 in (127 cm). Unusually in sailboat design, the coach house has two front portlights. [1] [3]
The design has a PHRF racing average handicap of 276 and a hull speed of 5.4 kn (10.0 km/h). [3]
In a 2010 review Steve Henkel wrote, "the design features a relatively wide beam for her length ... that, combined with her full-width cabin house (no side decks), makes her relatively roomy, but also results in a somewhat awkward appearance—and ironically, compared to her higher-topside comps, the Matilda ends up with a lower Space Index. Best features: The lifting keel has a bulb at the bottom, helping (along with a high D/L) to give good stability under sail, as well as a motion index higher than her comps. The keel height is controlled by a cockpit mounted winch. Unlike some lifting-keel designs, the Matilda 20 can be sailed with the keel in any position as the occasion demands. Worst features: Access to the forward V-berth is through the curtain-enclosed head area, a minor inconvenience." [3]
In a review Michael McGoldrick wrote, "the Matilda 20 has a very wide beam for a 20 footer. It also has to rate as one of the roomier 20 footers on the used market in Canada. Much of the Matilda's large interior is due to the fact that its cabin stretches the full width of the beam (there are no side decks). This feature gives the boat a somewhat awkward appearance, but is also means that it has an interesting cabin layout below decks and space for a semi-private head (toilet). A noteworthy feature is that the Matilda has a good size ballasted centerboard as retractable keel ... For the amount of room it offers, the Matilda is a relatively light boat. This boat usually comes on a trailer." [5]
The O'Day 23 is a series of American trailerable sailboats, that were designed by C. Raymond Hunt Assoc. and first built in 1972.
The Halman 20 is a Canadian trailerable sailboat, that was first built in 1977.
The Kelt 7.6 is a French trailerable sailboat, that was designed by Jean Berret and first built in 1980.
The Columbia 24 Challenger, or Columbia Challenger 24, is an American trailerable sailboat that was designed by Joseph McGlasson and first built in 1962.
The Antrim 20 is an American trailerable sailboat that was designed by Jim Antrim as a cruiser and first built in 1982.
The Bremer 25 is an American trailerable sailboat that was designed by Mark Bremer as a racer-cruiser and first built in 1995.
The Buccaneer 210 is an American trailerable sailboat that was designed by Alan Payne as a cruiser and first built in 1974.
The Buccaneer 240 and Buccaneer 245 are a family of American trailerable sailboats that were both designed as cruisers and first built in 1975.
The Clipper 21, also called the Clipper Marine 21 and the Clipper Mark 21, is an American trailerable sailboat that was designed by William Crealock and first built in 1971.
The Ensenada 20 is an American trailerable sailboat that was designed by Lyle C. Hess as a cruiser and first built in 1972.
The Ericson 25, also called the Ericson 25 Mark I is an American trailerable sailboat that was designed by Bruce King as a cruiser and first built in 1973.
The Ericson 25+, also called the Ericson 25 Mark II, is an American trailerable sailboat that was designed by Bruce King as a cruiser and first built in 1978.
The ETAP 20 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1975.
The ETAP 23 is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1982.
The Grampian 23 is a Canadian trailerable sailboat that was designed by Alex McGruer as a cruiser and first built in 1971.
The Irwin 10/4 is an American trailerable sailboat that was designed by Ted Irwin and Walter Scott as a cruiser and first built in 1975.
The Bahia 22, also called the Bahia 23, is a French trailerable sailboat that was designed by Philippe Harlé as a pocket cruiser and first built in 1983.
The South Coast 25 is an American trailerable sailboat that was designed by Warren Metcalf as a cruiser and first built in 1969.
The Mirage 5.5 is an American trailerable sailboat that was designed by Ken Fickett as an International Offshore Rule Mini Ton class racer and first built in 1975.
The Montego 20 is an American trailerable sailboat that was designed by Johannes "Jopie" Helsen as a pocket cruiser and first built in 1976.