Development | |
---|---|
Designer | Chuck Burns |
Location | United States |
Year | 1996 |
Builder(s) | Hunter Marine |
Name | Hunter 212 |
Boat | |
Boat weight | 1,800 lb (816 kg) |
Draft | 5.00 ft (1.52 m) |
Hull | |
Type | Monohull |
Construction | ACP |
LOA | 21.00 ft (6.40 m) |
LWL | 18.00 ft (5.49 m) |
Beam | 9.17 ft (2.80 m) |
Engine type | Outboard motor |
Hull appendages | |
Keel/board type | centerboard |
Ballast | 140 lb (64 kg) |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 21.00 ft (6.40 m) |
J foretriangle base | 7.92 ft (2.41 m) |
P mainsail luff | 23.67 ft (7.21 m) |
E mainsail foot | 10.00 ft (3.05 m) |
Sails | |
Sailplan | Fractional B&R rigged sloop |
Mainsail area | 118.35 sq ft (10.995 m2) |
Jib/genoa area | 83.16 sq ft (7.726 m2) |
Total sail area | 201.51 sq ft (18.721 m2) |
Racing | |
PHRF | 216 (average) |
The Hunter 212 is an American trailerable sailboat that was designed by Chuck Burns as a day sailer and cruiser and first built in 1996. [1] [2] [3] [4] [5]
The design was built by Hunter Marine in the United States between 1996 and 2002, but it is now out of production. [1] [2]
The Hunter 212 is a small recreational keelboat, built predominantly of ACP. It has a fractional sloop B&R rig, a slightly raked stem, an open reverse transom, a transom-hung swing-up rudder controlled by a tiller and a centerboard keel. It displaces 1,800 lb (816 kg) and carries 140 lb (64 kg) of fixed ballast. [1] [4]
The boat has a draft of 5.00 ft (1.52 m) with the centreboard extended and 0.83 ft (0.25 m) with it retracted, allowing beaching or ground transportation on a trailer. [1]
The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW) outboard motor for docking and maneuvering. [1]
Standard factory equipment included a portable head, cooler and a highway trailer. Optional equipment included an asymmetrical spinnaker, roller furler, front hatch and a bimini top and dodger, as well netting for the open transom. [4]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settee berths in the main cabin. The galley is on the port side, under the bow berth. The head is located in the bow cabin on the starboard side under the "V"-berth. Cabin headroom is 52 in (132 cm). [4] [5]
The design has a PHRF racing average handicap of 216. It has a hull speed of 5.69 kn (10.54 km/h). [6]
In a 2010 review Steve Henkel wrote, "Hunter 212 shares the same bulbous 'modern' look with several other Hunter boats, but is different in that she is made with a non-fiberglass plastic material Hunter ads identified only as ACP, or Advanced Composite Process—'five times more impact resistant than fiberglass' and the hulls were molded by JY Sailboats in a joint venture arrangement. The construction involves a sandwich with 18" thick sheet of ABS plastic, and an inch or more of closed cell foam with a fiberglass mat backing. Best features: With a board-up draft of ten inches and an optional mast raising device that is designed for one person to use, the Hunter 212 should be easier than most ... to launch at a ramp. Worst features: The only ballast is the 135-pound weighted centerboard, so practically all the vessel's stability is derived from the form of the hull plus the crew’' weight. From this we would guess her stability in a breeze would be considerably worse than any of her comp[etitor]s. As for the 'ACP' material, it requires special adhesives to bond repairs. Plain resins, epoxy, or marine fillers won't stick and hold." [5]
Similar sailboats
The San Juan 21 is an American trailerable sailboat, that was designed by Don Clark as and first built in 1970.
The Hunter 23 is an American trailerable sailboat, that was designed by Hunter Marine and first built in 1985.
The Halman 20 is a Canadian trailerable sailboat, that was first built in 1977.
The Catalina 250 is an American trailerable sailboat, that was designed by the Catalina Design Team and first built in 1995.
The Mariner 19 is an American trailerable sailboat, that was designed by Philip Rhodes and first built in 1962.
The Starwind 223 is an American trailerable sailboat, that was designed by Cortland Steck and first built in 1984.
The Mistral T-21 is a Canadian trailerable sailboat, that was designed by Mistral Sailboats and first built in 1978.
The Hunter 18.5 is an American trailerable sailboat that was designed by the Hunter Design Team as a cruising sailboat and first built in 1987.
The Hunter 19-2 is an American trailerable sailboat that was designed as a day sailer and small cruising sailboat by the Hunter Design Team and first built in 1993.
The Hunter 20 is an American trailerable sailboat that was designed by Cortland Steck as daysailer and small cruiser and first built in 1983.
The Hunter 22 is an American trailerable sailboat that was designed by the Hunter Design Team and first built in 1981.
The Hunter 23.5 is an American trailerable sailboat that was designed by the Hunter Design Team and first built in 1992.
The Hunter 240 is an American trailerable sailboat that was designed by the Hunter Design Team and first built in 1998.
The Pearson Electra is an American trailerable sailboat that was designed by Carl Alberg as a Midget Ocean Racing Club (MORC) racer and first built in 1960.
The Marshall 22 is an American trailerable sailboat that was designed by Breckenridge Marshall as a cruiser and first built in 1965.
The Beachcomber 25 is an American trailerable sailboat that was designed by Walter Scott as a cruiser and first built in 1979.
The Watkins 23 is an American trailerable sailboat that was designed by Johannes "Jopie" Helsen, modified by Watkins Yachts and first built in 1973.
The Newport 212 is an American trailerable sailboat that was designed by Harry R. Sindle as a pocket cruiser and first built in 1972.
The Pearson 23 is an American trailerable sailboat that was designed by William Shaw as a cruiser and first built in 1978.
The Starwind 22 is an American trailerable sailboat that was designed by Halsey Herreshoff as a cruiser and first built in 1982.