Development | |
---|---|
Designer | Hunter Design Team and Rob Mazza |
Location | United States |
Year | 1995 |
Builder(s) | Hunter Marine |
Boat | |
Boat weight | 6,500 lb (2,948 kg) |
Draft | 5.00 ft (1.52 m) |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 27.75 ft (8.46 m) |
LWL | 23.58 ft (7.19 m) |
Beam | 9.63 ft (2.94 m) |
Engine type | Yanmar 18 hp (13 kW) diesel engine |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 2,100 lb (953 kg) |
Rudder(s) | internally-mounted spade-type rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 31.50 ft (9.60 m) |
J foretriangle base | 9.42 ft (2.87 m) |
P mainsail luff | 31.67 ft (9.65 m) |
E mainsail foot | 12.00 ft (3.66 m) |
Sails | |
Sailplan | Fractional B&R rigged sloop |
Mainsail area | 190.02 sq ft (17.653 m2) |
Jib/genoa area | 148.37 sq ft (13.784 m2) |
Total sail area | 338.39 sq ft (31.437 m2) |
Racing | |
PHRF | 186 (average) |
The Hunter 280 is an American sailboat that was designed by the Hunter Design Team in conjunction with Rob Mazza, as a cruising boat and first built in 1995. [1] [2] [3]
The design replaced the Hunter 28 in the company line, which had been produced from 1989 to 1994. [1] [4]
The design was built by Hunter Marine in the United States between 1995 and 1999, but it is now out of production. [1] [5]
The Hunter 280 is a recreational keelboat, built predominantly of fiberglass. It has a fractional sloop B&R rig with a full-batten mainsail and 110% genoa, a raked stem, a walk-through reverse transom with a swimming platform, an internally-mounted spade-type rudder controlled by a wheel or an optional tiller and a fixed fin keel or option shoal-draft wing keel. It displaces 6,500 lb (2,948 kg) and carries 2,100 lb (953 kg) of ballast. [1] [3]
The boat has a draft of 5.00 ft (1.52 m) with the standard keel and 3.50 ft (1.07 m) with the optional shoal draft wing keel. [1]
The boat is fitted with a Japanese Yanmar diesel engine of 18 hp (13 kW), with a 9 hp (7 kW) optional. The fuel tank holds 20 U.S. gallons (76 L; 17 imp gal) and the fresh water tank has a capacity of 40 U.S. gallons (150 L; 33 imp gal). [1]
Standard factory equipment supplied included self-tailing winches, double lifelines, a teak and holly cabin sole, a dinette table that converts to a berth, four opening ports, an enclosed head with a 20 U.S. gallons (76 L; 17 imp gal) holding tank, shower, icebox, kitchen dishes, anchor, fog horn and life jackets. The boat has sleeping accommodation for six people. Optional equipment included a spinnaker and an LPG stove. [3]
The design has a PHRF racing average handicap of 186 with a high of 192 and low of 180. It has a hull speed of 6.51 kn (12.06 km/h). [6]
Similar sailboats
The Hunter 306 is an American sailboat design, that was introduced in 2001.
The Hunter 356 is an American sailboat, that was designed by Glenn Henderson and introduced in 2000.
The C&C 29 is a series of Canadian sailboats, that was designed by Cuthbertson & Cassian as International Offshore Rule half-ton racers and first built in 1977. The design is now out of production.
The Hunter 36-2 is an American sailboat, that was designed by Glenn Henderson and first built in 2008.
The Hunter 410 is an American sailboat, that was designed by the Hunter Design Team and first built in 1998.
The Hunter 44, also called the Hunter 44 DS, is an American sailboat, that was designed by Glenn Henderson and first built in 2003.
The Hunter 45 and Hunter 45 Legend are a family of American sailboats, that was first built in 1985.
The Hunter 45 DS and Hunter 45 CC are a family of American sailboats, that was first built in 2005/2006.
The Hunter 31 is an American sailboat, designed by Cortland Steck and first built in 1983.
The C&C 37 is a Canadian sailboat, that was designed by Robert W. Ball of C&C Design and first built in 1981.
The Hunter 310 is an American sailboat, that was designed by the Hunter Design Team and first built in 1997.
The Hunter 27 is a series of American sailboats, that were first built in 1974.
The Hunter 36 Legend is an American sailboat, that was designed by Glenn Henderson and first built in 2001.
The Hunter 33-2, also referred to as the Hunter 33-2004, is an American sailboat, that was designed by Glenn Henderson and first built in 2004.
The Beneteau 31 is a French sailboat, that was designed by Groupe Finot and first built in 2002.
The Hunter 27-3 and Hunter 27X are a family of American sailboats that were both designed by Glenn Henderson and both first built in 2006.
The Hunter 28.5 is an American sailboat that was designed by the Hunter Design Team and first built in 1985.
The Hunter 290 is an American sailboat that was designed by the Hunter Design Team as a cruising boat and first built in 1999.
The Hunter 37 Legend is an American sailboat that was designed by Hunter Marine founder Warren Luhrs and first built in 1986.
The Hunter 40 is an American sailboat that was designed by Cortland Steck and first built in 1984.