Development | |
---|---|
Designer | Rod Johnstone |
Location | United States |
Year | 1989 |
No. built | 3000 |
Builder(s) | JY Sailboats Hunter Marine Nickels Boat Works Windrider |
Name | JY15 |
Boat | |
Crew | 2 |
Displacement | 275 lb (125 kg) |
Draft | 3.00 ft (0.91 m) |
Hull | |
Type | Monohull |
Construction | ACP (Advanced Composite Plastic) or Fiberglass |
LOA | 15.00 ft (4.57 m) |
Beam | 5.83 ft (1.78 m) |
Hull appendages | |
Keel/board type | centerboard |
Ballast | none |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
Sails | |
Sailplan | Fractional rigged sloop |
Mainsail area | 100 sq ft (9.3 m2) |
Jib/genoa area | 35 sq ft (3.3 m2) |
Total sail area | 135 sq ft (12.5 m2) |
The JY15 is an American one-design centerboard dinghy designed by Rod Johnstone in 1989. [1]
The boat was built by JY Sailboats and then by Hunter Marine in the United States. The design was acquired by Nickels Boats Works and built from 2011. Nickels merged with WindRider LLC of Minneapolis, Minnesota in 2015 and production continued, but had ended by 2020. [2] [3] [4] [5] [6]
The JY15 is a recreational, planing hull, sailing dinghy, built predominantly of Advanced Composite Process (ACP) by JY Sailboats and Hunter and later from fiberglass by Nickels and WindRider. It has a fractional sloop, a raked stem, a vertical transom, a transom-hung rudder controlled by a tiller with an extension and a folding centerboard. It displaces 275 lb (125 kg). [2]
The boat has a draft of 3.00 ft (0.91 m) with the centreboard extended and 0.50 ft (0.15 m) with it retracted, allowing beaching or ground transportation on a trailer. [2]
The stays have lever adjusters for rapid set-up and the mast disassembles for ease of ground transport. The mainsheet is a 2:1 and is led off to the centerboard trunk. The rudder swings up for launching and recovering in shallow water. The design is optimized for crew hiking out, with hiking straps and rounded deck and hull for comfort. [1]
The Hunter-production JY-15 was made out of ACP (Advanced Composite Process). ACP is a laminate consisting of a foam core, an inner fiberglass skin, and a 1/8" outer plastic skin. When the design was acquired by Nickels it was rendered in fiberglass. [2] [6]
The JY15 is sailed in over 80 fleets in the US. [6]
Similar sailboats
The Lightning is an American sailing dinghy that was designed by Olin Stephens of Sparkman & Stephens, as a one-design racer and first built in 1938.
The Buccaneer 18, also called the Buccaneer dinghy and the Gloucester 18, is an American planing sailing dinghy that was designed in 1966 by Rod Macalpine-Downie and Dick Gibbs as a one-design racer and day sailer. The prototype was first shown in 1967 at Yachting's "One of a Kind" Regatta, in which it placed second.
The Y Flyer is an American sailing dinghy that was designed by Alvin Youngquist in 1938 as a one-design racer and first built in 1941.
The Hunter 140 is an American dinghy that was designed by the Hunter Design Team as a sailing trainer and first built in 2003.
The Hunter 23 is an American trailerable sailboat, that was designed by Hunter Marine and first built in 1985.
The C-Lark is an American sailboat, that was designed by Don Clark and first built in 1964.
The Rhodes 19 is an American trailerable day sailer or sailing dinghy, that was designed by Philip Rhodes as a one-design racer and first built in 1958.
The Coronado 15 is an American sailing dinghy that was designed by Frank V. Butler as a one-design racer and first built in 1968.
The Hunter 26 is an American trailerable sailboat, that was designed by Rob Mazza and first built in 1994.
The Hunter 146 is an American sailing dinghy that was designed by Chuck Burns and the Hunter Design Team as a novice sailboat and first built in 2003.
The Hunter 170 is an American sailing dinghy that was designed the Hunter Design Team and first built in 1999.
The Hunter 19-1 is an American trailerable sailboat that was designed as a day sailer and small cruising sailboat by the Hunter Design Team and first built in 1981.
The Hunter 212 is an American trailerable sailboat that was designed by Chuck Burns as a day sailer and cruiser and first built in 1996.
The Hunter 22 is an American trailerable sailboat that was designed by the Hunter Design Team and first built in 1981.
The Hunter Xcite, also called the Hunter Xcite 10, is an American sailing dinghy that was designed by the Hunter Design Team and first built in 2003.
The Howmar 12, sometimes written Howmar Twelve, is an American sailing dinghy that was designed by Craig V. Walters of Sparkman & Stephens as a one-design racer, trainer and day sailer and first built in 1983.
The Tech Dinghy is an American sailing dinghy that was designed by George Owen, a professor at Massachusetts Institute of Technology (MIT), as a one-design racer and for sail training. It was first built in 1935.
The Rebel 16 is an American sailing dinghy that was designed by Ray Greene and Alvin Youngquist as a one-design racer and first built in 1948.
The Gloucester 15 is an American sailing dinghy that was designed by Rod Macalpine-Downie and Dick Gibbs and first built in 1987.
The Montgomery 12 is an American sailing dinghy that was designed by Lyle Hess as a daysailer and first built in 1972.