Development | |
---|---|
Designer | Bill and Andrew Menger |
Location | United States |
Year | 2001 |
Builder(s) | Menger Boatworks Thompson Boatworks |
Role | Sailing dinghy |
Name | Menger Cat 15 |
Boat | |
Displacement | 700 lb (318 kg) |
Draft | 3.50 ft (1.07 m) with centerboard down |
Hull | |
Type | monohull |
Construction | fiberglass |
LOA | 15.00 ft (4.57 m) |
LWL | 15.00 ft (4.57 m) |
Beam | 7.00 ft (2.13 m) |
Hull appendages | |
Keel/board type | centerboard |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Gaff rigged catboat |
Mast length | 18.00 ft (5.49 m) |
Sails | |
Sailplan | catboat |
Mainsail area | 145.00 sq ft (13.471 m2) |
Total sail area | 145.00 sq ft (13.471 m2) |
The Menger Cat 15, also called the Menger Cat Daysailer and the Thom Cat 15 Daysailer, is an American sailing dinghy that was designed by Bill Menger and Andrew Menger as a daysailer and first built in 2001. [1] [2]
The design was built by Menger Boatworks in the United States from 2001 until 2004, when the company went out of business. The design was acquired by Thompson Boatworks and remains in production. [1] [3]
The Menger Cat 15 is a recreational sailboat, built predominantly of hand laid-up fiberglass, with teak wooden trim. It is a gaff rigged catboat, with aluminum spars. The hull has a plumb stem, an angled transom, a transom-hung, kick-up rudder controlled by a varnished mahogany tiller and a centerboard. The boat displaces 700 lb (318 kg) and carries no ballast. A white dacron mainsail is standard equipment and an Egyptian cotton sail is optional. Foam flotation is included to make the boat unsinkable. There is also a storage compartment under the foredeck. [1] [2]
The boat has a draft of 3.50 ft (1.07 m) with the centerboard extended and 7 in (18 cm) with it retracted, allowing beaching or ground transportation on a trailer. [1]
The boat may be optionally fitted with a small outboard motor for docking and maneuvering. [1] [4]
In a 2000 review naval architect Bob Perry wrote, "the Menger 15 is designed in the style of the old sandbaggers. It is light and beamy with a beautiful hollow entry. The 145 square foot main will give you a sense of power without requiring sandbags to keep the boat on its feet. Coordination between the main and tiller is sometimes required to keep a catboat balanced and this provides a very convenient way to learn about the fine points of rig balance. The long boom will also help you learn the correct way to gybe in a breeze." [4]
A catboat is a sailboat with a single sail on a single mast set well forward in the bow of a very beamy and (usually) shallow draft hull. Typically they are gaff rigged, though Bermuda rig is also used. Most are fitted with a centreboard, although some have a keel. The hull can be 3.7 to 12.2 metres long with a beam half as wide as the hull length at the waterline. The type is mainly found on that part of the Eastern seaboard of the USA from New Jersey to Massachusetts.
The Beetle Cat is an American one-design sailing dinghy that was designed by John Beetle and first built in 1921. It is a smaller adaptation of traditional Cape Cod 20 to 30 ft catboat designs originally intended for fishing in shallow waters.
The Hobie 14 is an American catamaran sailing dinghy that was designed by Hobie Alter and first built in 1967.
The US1, sometimes written US 1, is an American sailing dinghy that was designed by Ralph Kuppersmith and Clark Mills as a one-design racer and first built in 1973.
The Cape Cod Cat, also called the Cape Cod Cat 17 and the Hermann Cat, is an American trailerable sailboat that was designed by Charles Whittholz as a day sailer/cruiser and first built in 1968.
The Alerion Express 19 is an American trailerable sailboat that was designed by Gary Hoyt as a cruiser and first built in 1998.
The Com-Pac Horizon Cat, also called the Horizon Cat 20, is an American trailerable sailboat that was designed by Halsey Herreshoff as cruiser and first built in 2002.
The Com-Pac Sun Cat, also called the Com-Pac Sun Cat 17, is an American trailerable sailboat that was designed by Clark Mills as a pocket cruiser and first built in 2000.
The Cornish Crabber 17, or just Cornish Crabber, is a British trailerable sailboat that was designed by Roger Dongray as a daysailer and pocket cruiser and first built in 1989.
The Surprise 15 is an American sailboat that was designed by Harry R. Sindle as a daysailer and first built in 1969.
The Lynx 16 is an American trailerable sailboat that was designed by Tony Davis as an daysailer and pocket cruiser, and first built in 1997.
The Menger Cat 17 is an American trailerable sailboat that was designed by Andrew Menger as a daysailer and cruiser and first built in 1983.
The Menger Cat 19, also sold as the Thom Cat 19 Catboat, is an American trailerable sailboat that was designed by father and son team Bill Menger and Andrew Menger as a daysailer and cruiser and first built in 1990.
The Menger Cat 23, also called the Thom Cat 23. is an American trailerable sailboat that was designed by Bill and Andrew Menger, based on the work of Francis Sweisguth. It was intended as daysailer and cruiser and first built in 1990.
The Menger Oysterman 23 is an American trailerable skipjack that was designed by Bill Menger as a daysailer and cruiser and first built in 1977.
Menger Boatworks was an American boat builder based in Babylon, New York on Long Island. The company specialized in the design and manufacture of fiberglass sailboats, particularly catboats and character boats.
The Mystic Catboat 20 is an American trailerable sailboat that was designed by Peter Legnos as a cruiser and first built in 1974.
The Pearson 23C is an American trailerable sailboat that was designed by William Shaw as a cruiser and first built in 1983.
The Pearson 23 is an American trailerable sailboat that was designed by William Shaw as a cruiser and first built in 1978.
The Sea Pearl 21 is an American trailerable sailboat or sailing dinghy, that was designed by Ron Johnson as a daysailer and first built in 1982.