Development | |
---|---|
Designer | Fred Scott |
Location | United States |
Year | 1972 |
No. built | 5,000 |
Builder(s) | American Machine and Foundry |
Role | Dinghy |
Name | Puffer |
Boat | |
Displacement | 160 lb (73 kg) |
Draft | 2.82 ft (0.86 m) with daggerboard down |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 12.50 ft (3.81 m) |
LWL | 11.50 ft (3.51 m) |
Beam | 4.83 ft (1.47 m) |
Hull appendages | |
Keel/board type | daggerboard |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
Sails | |
Sailplan | Fractional rigged sloop |
Mainsail area | 55 sq ft (5.1 m2) |
Jib/genoa area | 35 sq ft (3.3 m2) |
Spinnaker area | 100 sq ft (9.3 m2) |
Total sail area | 90 sq ft (8.4 m2) |
Racing | |
D-PN | 110.1 |
The Puffer is an American rowboat, motorboat and sailing dinghy that was designed by Fred Scott and first built in 1972. [1] [2]
The design was built in the United States by AMF Alcort, a division of American Machine and Foundry that had been acquired in 1969. The company completed 5,000 examples of the Puffer design starting in 1972, but it is now out of production. [1] [2] [3] [4]
The Puffer is a recreational sailboat, built predominantly of fiberglass, with a double hull and molded seats. It has a fractional sloop rig with a loose-footed mainsail, aluminum spars, a spooned and nearly plumb stem, a vertical transom, a transom-hung, kick-up mahogany rudder, swept aft and controlled by a tiller, plus a retractable mahogany daggerboard. It displaces 160 lb (73 kg), has a spinnaker of 100 sq ft (9.3 m2) and adjustable jib fairleads. [1] [2]
The boat has a draft of 2.82 ft (0.86 m) with the daggerboard extended and 4 in (10 cm) with it retracted, allowing beaching or ground transportation on a trailer or car roof rack. [1]
The boat has a motor mount so that it can be fitted with a small outboard motor. It was also supplied with oarlocks to allow rowing. [2]
For sailing the design is equipped with hiking straps, boom downhaul and an outhaul. It also has positive foam flotation. It is normally raced with a crew of one to three sailors. [2]
The design has a Portsmouth Yardstick racing average handicap of 110.1. [2]
In a 1994 review Richard Sherwood wrote, the "Puffer may be sailed or rowed, so she comes with oarlocks. There is also a motor mount. Seats are molded into the double hull, and there is foam under the benches in case both hulls are holed." [2]
Similar sailboats
The Windmill is an American sailing dinghy that was designed by Clark Mills as a one-design racer and first built in 1953.
The Banshee, sometimes called the Banshee 13, is an American sailing dinghy that was designed by Richard L. Reid as a one-design racer and first built in 1969.
The Bombardier Invitation is a Canadian sailing dinghy that was designed by Bombardier Research to compete in the same market with the Laser, as a one-design racer. It was first built in 1973.
The Shrimp is a Canadian dinghy that was designed by Hubert Vandestadt and Fraser McGruer and first built in 1972. The boat was designed to employed as a powered yacht tender, a rowboat or as a sailing dinghy.
The Blue Crab 11, also called the Gloucester 11, is an American utility dinghy that can be rowed, used as a motorboat or as a sailing dinghy. It was designed by Harry R. Sindle and first built in 1971. The design is named for the family of crustaceans.
The Skunk 11 is a Canadian utility dinghy that can be rowed, used as a motorboat, fishing boat or as a sailing dinghy. It was designed by Hubert Vandestadt and first built in 1969.
The Echo 12 is a Canadian rowboat, motorboat and sailing dinghy that was first built in 1979.
The Capri Cyclone, also referred to as the Cyclone 13 or just the Cyclone, is an American sailing dinghy that was designed by Frank V. Butler as a one-design racer and first built in 1970.
The Barnett 1400 is an American sailing dinghy that was designed by Ron Hedlund and Gerry Hedlund as a one-design racer and first built in 1989.
The Trac 14 is an American catamaran sailing dinghy that was designed by Australians Richard McFarlane and Jay McFarlane as a one-design racer and first built in 1980.
The Phantom 14 is an American sailing dinghy that was designed by Jack Howie as a racer and first built in 1977. It is a board sailboat, similar to the Sunfish.
The Nacra 20 is a catamaran sailing dinghy that was designed by Gino Morrelli and Pete Melvin as a one-design racer and first built in 1998.
The Nacra 5.2 is an American catamaran sailing dinghy that was designed by Tom Roland as a one-design racer and first built in 1975. Other than the small production run Nacra 36, the Nacra 5.2 was the first Nacra brand boat and established its reputation.
The Dolphin 15 Senior, sometimes referred to as just the Dolphin Senior, is an American sailing dinghy that was designed by brothers Glenn Corcorran and Murray Corcorran and first built in 1964.
The AMF Apollo 16 is an American sailing dinghy that was designed by Canadian Bruce Kirby as a one-design racer and first built in 1977.
The G-Cat 5.7 is an American catamaran sailing dinghy that was designed by Hans Geissler as a one-design racer and first built in 1980.
The Marsh Hen is an American trailerable sailboat that was designed by Reuben Trane as a pocket cruiser and first built in 1981.
The Prindle 18 is an American catamaran sailing dinghy that was designed by Geoffrey Prindle as a racer and first built in 1977.
The AMF 2100 is an American trailerable sailboat that was designed by Ted Hood as a cruiser-racer and first built in 1980. The design's designation indicates its approximate length in hundredths of a foot.
The Flipper is an American sailboat that was designed by Carter Pyle and Joe Quigg as a daysailer intended for children, first built in 1966.