Development | |
---|---|
Designer | Ted Geary |
Location | United States |
Year | 1928 |
No. built | 1500 |
Builder(s) | Blanchard Boat Company Clark Boat Company |
Name | Geary 18 |
Boat | |
Displacement | 525 lb (238 kg) |
Draft | 3.75 ft (1.14 m) centerboard down |
Hull | |
Type | Monohull |
Construction | Wood or fiberglass |
LOA | 18.16 ft (5.54 m) |
Beam | 5.46 ft (1.66 m) |
Hull appendages | |
Keel/board type | centerboard |
Rudder(s) | internally-mounted spade-type rudder |
Rig | |
Rig type | Bermuda rig |
Sails | |
Sailplan | Fractional rigged sloop |
Mainsail area | 114 sq ft (10.6 m2) |
Jib/genoa area | 43.5 sq ft (4.04 m2) |
Total sail area | 200 sq ft (19 m2) |
The Geary 18 is an American sailboat that was designed by Ted Geary as a one-design racer and first built in 1926. [1] [2] [3]
The boat was designed in reaction to the deaths of four young sailors in the capsize of a Star on Lake Union in 1927. Geary was determined to design a safer boat for youth sail training. [4]
The boat was originally named the 18' Development Class Flattie, but it was usually called simply the Flattie, due to its flat-bottomed hull shape. In 1961, the year after the designer's death, the class association renamed the design the Geary 18, in his honor. [1] [2]
The design was initially built by the Blanchard Boat Company for the Seattle Yacht Club and by members of the Royal Vancouver Yacht Club and others, including the Clark Boat Company in the United States. Since then many professional and amateur builders have completed examples of the design. A total of 1500 boats have been built. [1] [2] [5] [6]
Conceived as a youth boat, the Geary 18's design goals were "ease of construction, low cost, safety, speed, smartness, and value in training beginning sailors". The resulting boat is a small, unsinkable, recreational keelboat, initially built predominantly of wood, later versions were produced in fiberglass, with wood trim. It has a fractional sloop rig with a full-roach mainsail, a nearly plumb stem a vertical transom, an internally-mounted spade-type rudder controlled by a tiller and a retractable centerboard keel. It displaces 525 lb (238 kg) and can accommodate one to four crew members. Flotation bags are installed under the decks to ensure the boat will not sink. [1] [2] [4] [3]
The boat has a draft of 3.75 ft (1.14 m) with the centerboard extended and 1.92 ft (0.59 m) with it retracted, allowing beaching or ground transportation on a trailer. Both the centerboard and the rudder can be trimmed fore and aft to optimize the boat’s performance. As the centerboard is light, the boat relies on its beam to aid stability. [1] [4]
The class rules allow the use of a single crew trapeze, but no spinnaker. A whisker pole can be used to hold the jib out downwind instead. The design will plane. [1] [3]
The design has been constructed by many different boat-building companies and also by many amateur-builders, so the materials and construction techniques vary considerably. Most earlier boats have straight-sawn frames, with flat hull sides and bottoms, with flat decks, all made from wooden planking. Later wooden boats are mostly built from plywood. Some centerboards have been made from aluminum. [4] [3]
Starting in about the 1960s, many of the boats were built using fiberglass for the hull construction, but wooden hulls are still sailed. The 1996 championships in Ashland, Oregon were won by a wooden boat. In more recent years there has been a trend back to new boats being built of plywood, in place of fiberglass. [2]
The first ten boats were built by the Blanchard Boat Company for the Seattle Yacht Club, while another ten boats were amateur-built by members of the Royal Vancouver Yacht Club in 1928, forming racing fleets at those clubs. The Blanchard-built boats sold for US$150 when new. Fleets were quickly initiated in Oregon, Lake Arrowhead, California, and Acapulco, Mexico, the latter two by the designer himself. In the 1938 the design was named the official boat of the Sea Scouts. [2] [4]
Geary continued to promote the class after the Second World War, stating that he aspired to keep "the Flattie class ...as a racing yacht that anyone with little or no boating experience can build and race; to develop faster sailors, not faster boats; to keep the boat in a low-cost bracket, changing the specifications only when a definite saving can be shown." [2]
In the 1990s the class was being widely sailed on the North American Pacific coast, with more than 1,500 completed in total. [2]
The 1995 championships were held on Mission Bay, at San Diego, California, with 21 boats racing. The 1996 championships were held in Ashland, Oregon with 23 boats competing. The 1997 championships were sailed on Cultus Lake, British Columbia. [2]
Similar sailboats
The Thistle is an American planing sailing dinghy that was designed by Sandy Douglass as a one-design racer and first built in 1945.
The Blue Jay is an American sailing dinghy that was designed by Drake Sparkman of Sparkman & Stephens as a trainer for the Lightning one-design racer. The Blue Jay was first built in 1947.
The Buccaneer 18, also called the Buccaneer dinghy and the Gloucester 18, is an American planing sailing dinghy that was designed in 1966 by Rod Macalpine-Downie and Dick Gibbs as a one-design racer and day sailer. The prototype was first shown in 1967 at Yachting's "One of a Kind" Regatta, in which it placed second.
The Jet 14 is an American sailing dinghy that was designed by Howard Siddons as a one-design racer and first built in 1952.
The Y Flyer is an American sailing dinghy that was designed by Alvin Youngquist in 1938 as a one-design racer and first built in 1941.
The JY15 is an American one-design centerboard dinghy designed by Rod Johnstone in 1989.
The Rhodes 19 is an American trailerable day sailer or sailing dinghy, that was designed by Philip Rhodes as a one-design racer and first built in 1958.
The Penguin is an American sailing dinghy that was designed by Philip Rhodes in 1933 as a one design racer for frostbite racing on the US east coast and first built in 1939.
The Dolphin 24 is an American trailerable sailboat that was designed by William Shaw of Sparkman & Stephens as a Midget Ocean Racing Club (MORC) racer-cruiser and first built in 1959. Shaw had been one of the instigators of the MORC rules. The boat is Sparkman & Stephens' design #1497.
The Snowbird is an American sailboat that was initially designed by Willis Reid as a one design racer and first built in 1921. The boat was re-designed by Edson B. Schock in the 1940s and it became a popular junior class.
The Martin 16 is a Canadian trailerable sailboat, that was designed by Don Martin of Vancouver, British Columbia, specifically as a boat for disabled sailors. It was first built in 1995.
The Tartan 34 C is an American sailboat, that was designed by Sparkman & Stephens and first built in 1968. The boat is Sparkman & Stephens Design Number 1904.
The Mariner 19 is an American trailerable sailboat, that was designed by Philip Rhodes and first built in 1962.
The Pearson Electra is an American trailerable sailboat that was designed by Carl Alberg as a Midget Ocean Racing Club (MORC) racer and first built in 1960.
The Beachcomber 25 is an American trailerable sailboat that was designed by Walter Scott as a cruiser and first built in 1979.
The Interclub Dinghy is an American sailing dinghy that was designed by Sparkman & Stephens as a one-design racer and first built in 1946. It is sailed in frostbite racing on the US east coast, particularly on Long Island Sound. Frostbite races are the series held after the normal sailing season is finished.
The Tech Dinghy is an American sailing dinghy that was designed by George Owen, a professor at Massachusetts Institute of Technology (MIT), as a one-design racer and for sail training. It was first built in 1935.
The Hampton One-Design is an American sailing dinghy that was designed by Vincent Serio as a one-design racer and first built in 1934.
The International 210 is an American sailboat that was designed by Fenwick Williams under the supervision of C. Raymond Hunt as a one design racer and first built in 1946.
The Amphibi-Con 25, often just called the Amphibi-Con, is an American trailerable sailboat that was designed by E. Farnham Butler and Cyrus Hamlin as a racer-cruiser and first built in 1954. The design was one of the first "trailer sailers" and helped popularize this class of boat.