Development | |
---|---|
Designer | Ian Proctor |
Design | One-Design |
Boat | |
Crew | 2 |
Draft | .203 m (8.0 in) 1.169 m (3 ft 10.0 in) |
Hull | |
Type | Monohull |
Construction | GRP with wood trim Cold moulded plywood Composite (Wood/GRP) |
Hull weight | 169 kg (373 lb) |
LOA | 4.827 m (15.84 ft) |
Beam | 1.855 m (6 ft 1.0 in) |
Rig | |
Rig type | Fractional Bermuda or Marconi rig |
Mast length | 6.78 m (22.2 ft) |
Sails | |
Mainsail area | 8.83 m2 (95.0 sq ft) |
Jib/genoa area | 2.78 m2 (29.9 sq ft) |
Spinnaker area | 13.5 m2 (145 sq ft) |
Racing | |
D-PN | 91.6 [1] |
RYA PN | 1109 [2] |
The Wayfarer is a wooden or fibreglass hulled fractional Bermuda rigged sailing dinghy of great versatility; it can be used for short 'day boat' trips, for longer cruises and for racing. Over 11,000 have been produced as of 2016. [3]
The boat is 15 feet 10 inches (4.83 m) long, and broad and deep enough for three adults to comfortably sail for several hours. Longer trips are undertaken by enthusiasts, notably Frank Dye who sailed W48 'Wanderer' from Scotland to Iceland and Norway, crossing the North Sea twice. [4] [5] The Wayfarer's size, stability and seaworthiness have made it popular with sailing schools, and led it to be used as a family boat in a wide variety of locations.
Not only a versatile cruising dinghy, Wayfarers are also raced with a Portsmouth Number of 1105. As of 2013, it has a Portsmouth Yardstick rating of 91.6. [6]
From the original wooden design by Ian Proctor in 1957 [7] many subsequent versions of the Wayfarer have been produced. [8] There is also a double-hulled Canadian clone, known as the CL 16, featuring a simplified rig [upper-alpha 1] but otherwise identical. Genuine Wayfarers can be identified by the "W" symbol on their sails. [upper-alpha 2]
The sail plan consists of a Bermuda rig with a main, jib, and symmetrical spinnaker. The boat uses a retractable centreboard. An optional asymmetric spinnaker and spinnaker chute is available; also available is a "sail patch" which provides flotation for the mast in the event of a capsize (and particularly to prevent mast inversion – Turtling). [upper-alpha 3]
One-design racing is active and competitive — regionally, nationally and internationally. [9]
Over its history several versions of the Wayfarer have been developed, as follows.
This was the original wooden Wayfarer designed in 1957 to be manufactured by Small Craft Limited and also by amateur builders working from authorised kits, using the measured templates and jigs supplied, with a hull and deck made from plywood. Frank Dye's famous W48 Wanderer was of course of this type, a testament to its robust construction. The boat is now in the collection of the National Maritime Museum Cornwall in Falmouth. Other boats of this model are still racing after 60 years, and new ones can still be purchased today (on a custom basis) from Porter Brothers. The hull is of a 'three plank' construction, that is with two chines. This provides a good compromise between stability and ease of construction. Both forward and aft buoyancy compartments are fitted with large watertight hatches and this provides ample stowage space for cruising. The large floor space with flat floorboards and good clearance under thwart makes the Mark I a comfortable boat for two people to sleep in, when a boom-tent is erected for shelter. The mast is held in a tabernacle, which when rigged with a tackle on the forestay allows the mast to be lowered to pass beneath bridges. This feature was retained in subsequent models, as was the hull shape. [10]
A Glass Reinforced Plastic version was introduced in 1965 and was similar in layout to the wooden boat. Over two thousand copies of this model were made and many are still in use through the world. In contrast to other GRP models, this version has a large hatch to the forward buoyancy compartment useful for stowage when cruising, and a forward bulkhead extending right up to the foredeck level. The Mark I has no side buoyancy, and consequently does not suffer from a tendency to invert when capsized that plagued later models. The Mark I was also available as a composite model with a GRP hull and bulkheads but plywood fore- and side-decks. [10]
The Mark II was introduced in 1974 supposedly as an improvement. The front and rear buoyancy tanks were built into the hull before bonding on the deck. The forward buoyancy compartment has a gap above it and under the foredeck. This would have been useful for a spinnaker chute, but class regulations of the time did not allow that. The forward compartment had a small circular inspection hatch thus removing much of the useful dry stowage space. Side buoyancy compartments gave this model a tendency to invert, and those owned by sailing schools soon sported socks filled with polystyrene to provide a righting moment when capsized. Reduced clearance under the thwart made this boat uncomfortable to sleep in. [10]
A version with a self draining cockpit, the Mark II SD, was introduced in 1986. This was especially suitable for boats kept on moorings. However, the buoyancy sealed in the floor increases the inverting tendency and, when righted after a capsize, the trapped water causes instability. To help overcome this drain tubes through the aft tank were later introduced. [10]
This GRP model was introduced in 1987, combining the structural improvements of the Mark II with greater storage space in the bow. A horizontal bulkhead divides the bow buoyancy tank, and both the upper and lower sections have large access hatches creating secure stowage spaces. [10]
First produced in 1991 the Wayfarer Plus S was made with a sandwich construction for the hull and chines. This produced a boat that could compete with the original wooden boats in stiffness and weight, while having the maintenance advantages of GRP. The forward tank has a full-height bulkhead like the Mark I. The cruising version has a large hatch in the bulkhead to allow the tank to be used for stowage. [10]
The Wayfarer World was introduced in 1997 and was designed as a collaboration between Ian Proctor and his son Keith. Made in GRP with no woodwork it has a removable aft storage tank, a self draining cockpit, and a spinnaker chute. The rudder stock is of aluminium alloy. Until the MkIV this was the only version with an asymmetric spinnaker, although it can not be used in class races [except in the UK]. It has proved successful in both racing and cruising, including a North Sea crossing 1998. [10]
The Wayfarer World S Type is generally similar to the Wayfarer World but is made using the same foam sandwich construction as the Wayfarer Plus S. [10]
Built by Abbott Boats in Canada, production stopped in 2006 after a fire in which the molds were destroyed. [11] The company sustained a multimillion-dollar loss. [12]
An updated version (incorporating the 2008 design improvements by Phil Morrison of the Mark IV) is scheduled to begin future production in Canada; the "Wayfarer Cruiser" includes an optional asymmetrical spinnaker, which would not be allowed in racing. [13] [14] [15]
Introduced in 2007 the MkIV was a significant redesign by Phil Morrison. The design is intended to be more modern and spacious inside, and easier to right and drain after a capsize. This version was also designed to be "as fast as but no faster than the fastest" of the older Wayfarers. [10] [16] The Mark IV is also available in the United States. [14] [15]
It has been pointed out by some experienced sailors that designs closer to the original Mark 1 boats are more suitable for cruising because of their better stability and storage spaces. The latest versions are more prone to turtling and righting them can be very difficult. [17] [18] [19] This is the reason many cruising sailors prefer the older Wayfarer versions.
Dinghy sailing is the activity of sailing small boats by using five essential controls:
The Mirror is a type of popular sailing dinghy with more than 70,000 built.
Dinghy racing is a competitive sport using dinghies, which are small boats which may be rowboats, have an outboard motor, or be sailing dinghies. Dinghy racing has affected aspects of the modern sailing dinghy, including hull design, sail materials and sailplan, and techniques such as planing and trapezing.
The GP14 is a wooden or fibreglass hulled double-handed fractional Bermuda rigged sailing dinghy designed by Jack Holt in 1949.
The Enterprise is a Bermuda rigged sailing dinghy with a double-chined hull and distinctive blue sails. Normally crewed by two, and sometimes carrying a third crew member, it may also be sailed single-handed.
The International 420 Dinghy is a sailing dinghy popular for racing and teaching. The hull is fiberglass with internal buoyancy tanks. The 420 has a bermuda rig, spinnaker and trapeze. It has a large sail-area-to-weight ratio, and is designed to plane easily. The 420 is an International class recognised by World Sailing. The name refers to the boat's length of 420 centimetres.
The Manly Junior is a junior racing dinghy class popular in Sydney Australia. It was designed in 1959 for younger sailors and the length was originally designed so that the boat could be stored vertically downstairs inside Manly Yacht Club. To provide as much performance as possible in a short length, the designer, Ralph Tobias used a "snub" bow.
The Jet 14 is an American sailing dinghy that was designed by Howard Siddons as a one-design racer and first built in 1952.
The Wanderer is a 14-foot Fibreglass hull Bermuda rigged sailing dinghy designed by Ian Proctor. One of the main objectives of the design was to produce a robust safe and versatile dinghy that could be used for knockabout day sailing and cruising as well as racing, but was light enough to be handled ashore.
The 18 ft Skiff is considered the fastest class of sailing skiffs. The class has a long history beginning with races on Sydney Harbour, Australia in 1892 and later in New Zealand. The boat has changed significantly since the early days, bringing in new technology as it became available. Because of the need of strength, agility and skill, the class is considered to be the top level of small boat sailing. Worldwide this boat is called the "18 Foot Skiff". It is the fastest conventional non-foiling monohull on the yardstick rating, with a score of 675, coming only third after the Tornado and Inter 20.
Otter is a classification referring to a particular design for a two-man sailing dinghy with a glass fibre hull. Its rig consists of a main, a jib and an optional symmetric spinnaker. The hull dimensions are 11 ft 11 in length and 4 ft 10 in beam. The boat has a draft of 3 ft 6 in with the centreboard down. The sail area is 75 sq. ft. The class symbol is a stylised glass bubble; due to the original lightweight "cigar box cedar" construction of the prototypes, the name 'Bubble' was first used for the boat. John Baker obtained the plans for an expanded version of the boat in G.R.P. and hence renamed the boat 'Glass Bubble'. After being put into production by Baker, the name 'Otter' was adopted; coming from the river of the same name in East Devon, close to where the boat was manufactured.
A boat is said to be turtling or to turn turtle when it is fully inverted. The name stems from the appearance of the upside-down boat, similar to the carapace of a sea turtle. The term can be applied to any vessel; turning turtle is less frequent but more dangerous on ships than on smaller boats. It is rarer but more hazardous for multihulls than for monohulls, because multihulls are harder to flip in both directions. Measures can be taken to prevent a capsize from becoming a turtle.
The Jacksnipe is a two-man racing sailing dinghy with a single trapeze for the crew and symmetrical spinnaker.
The Pegasus is a powerful and fast two person racing and cruising dinghy designed by Uffa Fox in 1958. It was notable for being a boat capable of being built at home using marine ply but still with an efficient and aesthetically pleasing round bilged hull form.
The Gull sailing dinghy was designed by Ian Proctor in 1956, originally as a frameless double-chine plywood boat. However, it has been through several incarnations: the wooden Mark I, GRP Mark III, GRP Gull Spirit and GRP Gull Calypso. Today it is popular with sailing schools, especially in the United Kingdom.
Frank Charles Dye was a sailor who, in two separate voyages, sailed a Wayfarer class dinghy from the United Kingdom to Iceland and Norway. An account of this was written by Dye and his wife, Margaret, published as Ocean Crossing Wayfarer: To Iceland and Norway in a 16ft Open Dinghy.
The SCAMP is a wooden or fiberglass hulled Balanced Lug rigged sailing dinghy. The boat is 11 ft 11 in (3.63 m) long, and capable of accommodating four persons on a daysail or one to two for overnighting or extended cruising. Craig Wagner and Josh Colvin, editors of Small Craft Advisor Magazine, teamed up with noted New Zealand boat designer, John Welsford, to create what they call a "Mini Microcruiser" sailboat. Welsford considers it possibly the best boat he's designed, based on "suitability for purpose". Some early plans details received subsequent revisions by Kees Prins and the Northwest Maritime Center. While no particular feature of the boat is unprecedented, the combination of design elements has produced a "new genre of sailboat".
The Designers Choice is an American sailing dinghy that was designed by Sparkman & Stephens as a sail training and racing boat and first built in 1978. It was Sparkman & Stephens' design #2349.
The Isotope is an American catamaran sailing dinghy that was designed by Frank Meldau as a one-design racer and first built in 1962.
The Impulse 21, also called the Impulse Eagle, is an American trailerable sailboat that was designed by William E. Cook as a one-design racer and day sailer, It was first built in 1986.