Last updated
A New Zealand scow around 1900 Sailing Scow In New Zealand.jpg
A New Zealand scow around 1900

A scow is a smaller type of barge. Some scows are rigged as sailing scows. In the 19th and early 20th centuries, scows carried cargo in coastal waters and inland waterways, having an advantage for navigating shallow water or small harbours. Scows were in common use in the American Great Lakes and other parts of the U.S., Canada, southern England, and New Zealand. In modern times their main purpose is for recreation and racing.



The name "scow" derives from the Dutch schouw , ultimately from the German for a punt pole[ citation needed ] and subsequently transferred to mean the boat. Old Saxon has a similar word scaldan which means to push from the shore, clearly related to punting. [1]

The basic scow was developed as a flat-bottomed barge (i.e. a large punt) capable of navigating shallow rivers and sitting comfortably on the bottom when the tide was out. By 1848 scows were being rigged for sailing using leeboards or sliding keels. [1] They were also used as dumb barges towed by steamers. [1] Dumb scows were used for a variety of purposes: garbage (see The Adventures of Tugboat Annie), dredging (see Niagara Scow) as well as general estuarine cargos.

Sailing scows

A scow on the Adour in Bayonne in 1843 by Eugene de Malbos. Bayonne, rive de l'Adour - Fonds Ancely - B315556101 A MALBOS 2 014.jpg
A scow on the Adour in Bayonne in 1843 by Eugène de Malbos.

Sailing scows have significant advantages over traditional deep-keel sailing vessels that were common at the time the sailing scow was popular. Keelboats, while stable and capable in open water, were incapable of sailing into shallow bays and rivers, which meant that to ship cargo on a keelboat required a suitable harbour and docking facilities, or else the cargo had to be loaded and unloaded with smaller boats. Flat-bottomed scows, on the other hand, could navigate shallow waters, and could even be beached for loading and unloading. This made them useful for moving cargo from inland regions unreachable by keelboat to deeper waters where keelboats could reach. The cost of this shallow water advantage was the loss of the seaworthiness of flat-bottomed scow boats in open water and bad weather.

The squared-off shape and simple lines of a scow make it a popular choice for simple home-built boats made from plywood. Phil Bolger and Jim Michalak, for example, have designed a number of small sailing scows, and the PD Racer and the John Spencer designed Firebug are growing classes of home-built sailing scow. Generally these designs are created to minimize waste when using standard 4-foot by 8-foot sheets of plywood.

The scow hull is also the basis for the shantyboat or, on the Chesapeake, the ark, a cabin houseboat once common on American rivers. The ark was used as portable housing by Chesapeake watermen, who followed, for example, shad runs seasonally.

The Thames sailing barge and the Norfolk wherry are two British equivalents to the scow schooner. The Thames sailing barges, while used for similar tasks, used significantly different hull shapes and rigging.

The term scow is used in and around the west Solent for a traditional class of sailing dinghy. Various towns and villages claim their own variants (Lymington, Keyhaven, Yarmouth, West Wight, Chichester), they are all around 11 feet (3.35 m) in length and share a lug sail, pivoting centre board, small foredeck and a square transom with a transom-hung rudder.

Scow schooners

An American design that reached its zenith of size on the American Great Lakes, and was also used widely in New Zealand, the schooner-rigged scow was used for coastal and inland transport, from colonial days to the early 1900s. [2] Scow schooners had a broad, shallow hull, and used centreboards, bilgeboards or leeboards rather than a deep keel. The broad hull gave them stability, and the retractable foils allowed them to move even heavy loads of cargo in waters far too shallow for keelboats to enter. The squared-off bow and stern accommodated a large cargo. The smallest sailing scows were sloop-rigged (making them technically a scow sloop), but were otherwise similar in design. The scow sloop eventually evolved into the inland lake scow, a type of fast racing boat.

Sailing scows were popular in the American South for economic reasons, because the pine planks found there were difficult to bend, and because inlets along the Gulf Coast and Florida were often shallow.

New Zealand trading scows

The American scow design was copied and modified in New Zealand by early immigrant settlers to Auckland in the 1870s. In 1873, a sea captain named George Spencer, [3] who had once lived and worked on the American Great Lakes and had gained a first-hand knowledge of the practical working capabilities of the sailing barges that plied their trade on the lakes, recognised the potential use of similar craft in the protected waters of the Hauraki Gulf, Auckland. He commissioned a local shipbuilder, Septimus Meiklejohn, [4] to construct a small flat-bottomed sailing barge named the Lake Erie, [5] which was built at Omaha, not far from Mahurangi. [6] An account of the launching of this vessel appeared in 1873 in the Auckland newspaper, The Daily Southern Cross, [7] which gave its readers a good idea of the distinctive construction and advantages over other vessels.

The Lake Erie was 60 feet 6 inches in length, seventeen feet 3 inches in breadth and had a draught of three feet 4 inches. It was fitted with lee boards (a type of keel slotted onto the sides of the vessel), but these were highly impracticable in rough weather on the New Zealand coast. Later scows were constructed with the much safer slab-sided centre board, which crews raised and lowered as required. This one small craft spawned a fleet of sailing scows that became associated with the gum trade and the flax and kauri industries of northern New Zealand.

Scows came in all manner of shape and sizes and all manner of sailing rigs, but the "true" sailing scow displayed no fine lines or fancy rigging. They were designed for hard work and heavy haulage and they did their job remarkably well. They took cattle north from the stockyards of Auckland and returned with a cargo of kauri logs, sacks of kauri gum, shingle, firewood, flax or sand. With their flat bottoms they could be sailed or poled much further up the many tributaries and rivers where the bushmen and bullock teams had the freshly sawn kauri logs amassed, thereby saving a great deal of time and energy on the part of the bushmen. Flat-bottomed scows were also capable of grounding on a beach for loading and unloading. Over the side went duckboards, wheelbarrows, and banjo shovels. The crew then filled the vessel with sand, racing against the turn of the tide. When the tide did turn, they loaded the equipment back on board and put off to sea. Occasionally an inexperienced skipper overloaded the scow. Then, as the water rose against the outside of the hull (diminishing the amount of safe "free board"), the crew had to shovel rapidly to reduce the contents in the hold to a safe level.

Logs when hauled were always carried above deck, secured by heavy chain, the space between decks being left empty to give added buoyancy. The logs were taken to Auckland and unloaded into floating "booms" to await breaking down in the sawmills of the Kauri Timber Company [8] and other such mills that operated right on the edge of Auckland Harbour.

The golden age of scows and schooners lasted from the 1890s to the end of the First World War, when schooners were superseded by steamers and scows were gradually replaced with tugs.

Jane Gifford Re-rigged, Manukau Harbour 1993. Photo: Subritzky Collection. Nzscow.jpg
Jane Gifford Re-rigged, Manukau Harbour 1993. Photo: Subritzky Collection.

The Subritzky family of Northland operated the scows Jane Gifford and Owhiti as the last fleet of working scows, operating between the Port of Auckland and the Island communities of the Hauraki Gulf. [9] The Jane Gifford was gifted to the Waiuku Historical Society [10] by Captain Bert Subritzky and his wife Moana in 1985, where it was re-masted and re-rigged to its original splendour. The Owhiti was sold to Captain Dave Skyme and fully restored to its 1924 sea worthiness, and it subsequently starred in the 1983 movie Savage Islands (starring Tommy Lee Jones and amongst others Kiwi icon and singer Prince Tui Teka as King Ponapa). Unfortunately the Owhiti was not maintained for a period of time, during which teredo shipworms destroyed much of her structure. She remains in a deteriorating condition at Opua. Her rig may see use in another scow when restored.

The main differences from American scows were sharper bows and favouring the ketch rig instead of the schooner rig, although a great many schooner- and topsail schooner-rigged vessels were built. Some 130 scows were built in the north of New Zealand between 1873 and 1925; they ranged from 45 to 130 ft (14–40 m). New Zealand trading scows travelled all around New Zealand as well as to Australia and to the west coast of America although the majority were based in the Hauraki Gulf of New Zealand. [11]

Notable sailing scows

The scow schooner Alma of San Francisco, built in 1891, restored in the 1960s, and designated a National Historic Landmark (NHL) in 1988, was one of the last scow schooners in operation. She is a small example, 59 feet in length, 22.6 feet in beam, with a draft of 4 feet and a loaded displacement of 41 tons.

Elsie was the last scow sloop operated on the Chesapeake Bay. Although sailing scows were once numerous around the Bay, they are poorly documented.

The Ted Ashby is a ketch-rigged scow built in 1993 and based at the New Zealand National Maritime Museum in Auckland, it regularly sails the Auckland harbour as a tourist attraction. It was named after an old-time New Zealand seafarer and scowman, Ted Ashby, who had the foresight to document much of the history of these coastal work horses in his book Phantom Fleet - The Scows and Scowmen of Auckland, which was published by A. H. & A. W. Reed, Wellington, in 1976.

The Jane Gifford [12] is a ketch-rigged deck scow built in 1908 by Davey Darroch, Big Omaha, New Zealand. The vessel was re-launched at Waiuku on the 28 November 1992, with Captain Basil Subritzky, the son of the late Captain Bert Subritzky and his family as guests of honour. The Jane Gifford then commenced sailings and tours on the Manukau Harbour between Waiuku and the Onehunga Wharf. In 1999 she was pulled out of the water for a rebuild, which commenced at Okahu Bay on the Waitemata Harbour. She then sat rotting until 2005, when she was moved to Warkworth for rebuilding. A full rebuild, using modern materials has been done at Warkworth, and the vessel was relaunched on 16 May 2009. She returned to sail later, and has been occasionally under sail in the Hauraki Gulf. She is the only original New Zealand scow still afloat to carry sail.

The Echo was built in 1905 of Kauri in New Zealand. She is 104 feet (32 m) long, with two masts and topsail rigged. Twin diesel engines were installed in 1920. In 1942–44 she was used by US forces in the Pacific, see USS Echo (IX-95). Her story was the basis for the 1960 film with Jack Lemon, The Wackiest Ship in the Army and the 1965 TV series. She was nearly broken up in 1990, but is now preserved at Picton, New Zealand

Scow in the treacherous Grand Canyon of the Fraser, BC, c.1908. Scow in Grand Canyon.gif
Scow in the treacherous Grand Canyon of the Fraser, BC, c.1908.

Howard I. Chapelle documented a number of scows in his book American Small Sailing Craft.

North American commercial scows

Scows were widely used to carry freight and passengers along or across inland waterways, sometimes preceding the arrival of railway transportation. Many scows were pulled/pushed by a tug or shore cable, whereas others were powered only by the current. [13] [14]

Historic 19th-century US canals used work scows for canal construction and maintenance, [15] as well as ice breaker scows, [16] filled with iron or heavy objects, to clear ice from canals.

The Niagara Scow is a former dredging scow stuck on the rocks in the Niagara River upstream from the brink of Niagara Falls Horseshoe Falls since 1918. After being stuck in place for more than 100 years, in November 2019, the scow broke loose during a wind storm and moved 50 metres (164 ft) closer to the edge of the Horseshoe Falls. [17]

Racing boats: the inland lake scows

In the early 20th century, smaller sloop and cat rigged scows became popular sailboats on inland lakes throughout the midwestern United States. First popularized by Johnson Boat Works in Minnesota, these boats were distinguished by their larger sail plans, retractable bilgeboards, and (in some classes) twin rudders. There are many active racing classes throughout the Midwest, Western New York, the New Jersey Shore and parts of the South. These boats are traditionally identified by their class letters:

Contrary to the connotations of the old definition of "scow" (large and slow), the inland lake scows are extremely fast—the wide, flat bottom hull allows them to plane easily. As a consequence of this, the A scow is the highest rated centerboard boat according to the US Portsmouth yardstick numbers.

Alternative design

A 'semi-flying' scow that uses a host of design tricks, including wings/foils and a telescopic canting keel, a retractable bowsprit and an asymmetrical spinnaker, has been designed in France. [19]

Related Research Articles

<span class="mw-page-title-main">Dinghy sailing</span> Sailing of small boats, usually for sport

Dinghy sailing is the activity of sailing small boats by using five essential controls:

<span class="mw-page-title-main">Daggerboard</span>

A daggerboard is a retractable centreboard used by various sailing craft. While other types of centreboard may pivot to retract, a daggerboard slides in a casing. The shape of the daggerboard converts the forward motion into a windward lift, countering the leeward push of the sail. The theoretical centre of lateral resistance is on the trailing edge of the daggerboard.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".

<span class="mw-page-title-main">Thames sailing barge</span> Type of commercial sailing boat

A Thames sailing barge is a type of commercial sailing boat once common on the River Thames in London. The flat-bottomed barges with a shallow draught and leeboards, were perfectly adapted to the Thames Estuary, with its shallow waters and narrow tributary rivers. The larger barges were seaworthy vessels, and were the largest sailing vessel to be handled by just two men. The average size was about 120 tons and they carried 4,200 square feet (390 m2) of canvas sail in six working sails. The mainsail was loose-footed and set up with a sprit, and was brailed to the mast when not needed. It is sheeted to a horse, as is the foresail; they require no attention when tacking. The foresail is often held back by the mate to help the vessel come about more swiftly.

<i>Alma</i> (1891)

Alma is an 1891-built scow schooner, which is now preserved as a National Historic Landmark at the San Francisco Maritime National Historical Park in San Francisco, California.

<span class="mw-page-title-main">Leeboard</span>

A leeboard is a form of pivoting keel used by a sailboat largely and very often in lieu of a fixed keel. Typically mounted in pairs on each side of a hull, leeboards function much like a centreboard, allowing shallow-draft craft to ply waters fixed keel boats cannot. Only the leeward side leeboard is used at any time, as it submerges when the boat heels under the force of the wind.

<span class="mw-page-title-main">Jackass-barque</span>

A jackass-barque, sometimes spelled jackass bark, is a sailing ship with three masts, of which the foremast is square-rigged and the main is partially square-rigged and partially fore-and-aft rigged (course). The mizzen mast is fore-and-aft rigged.

<span class="mw-page-title-main">18ft Skiff</span>

The 18 ft Skiff is considered the fastest class of sailing skiffs. The class has a long history beginning with races on Sydney Harbour, Australia in 1892 and later in New Zealand. The boat has changed significantly since the early days, bringing in new technology as it became available. Because of the need of strength, agility and skill, the class is considered to be the top level of small boat sailing. Worldwide this boat is called the "18 Foot Skiff". It is the fastest conventional non-foiling monohull on the yardstick rating, with a score of 675, coming only third after the Tornado and Inter 20.

<span class="mw-page-title-main">Fractional rig</span> Sailing rig type

A fractional rig on a sailing vessel consists of a foresail, such as a jib or genoa sail, that does not reach all the way to the top of the mast.

The Melges 17 is an American scow-hulled sailing dinghy that was designed by Reichel/Pugh as a one-design racer and first built in 2005.

The MC Scow is an American sailing dinghy that was designed as a one-design racer and first built in 1956.

<span class="mw-page-title-main">M Scow</span> Sailboat class

The M Scow, also called the M-Scow and the M-16 Scow, is a Canadian/American sailing dinghy that was designed by Johnson Boat Works and Melges Boat Works as a one-design racer and first built in 1950.

<span class="mw-page-title-main">E Scow</span> Sailboat class

The E Scow is an American sailing dinghy that was designed by Arnold Meyer Sr as a one-design racer and first built in 1924.

A chine in boat design is a sharp change in angle in the cross section of a hull. The chine typically arises from the use of sheet materials as the mode of construction.

<span class="mw-page-title-main">Sportsboat</span>

The term sportsboat first appeared in the late 1980s and early 1990s to describe trailer sailers that were optimised for high performance at the expense of accommodation and ballast. The very definition of the term "sportsboat" is evolving.

<span class="mw-page-title-main">Pinisi</span> Type of rigging of Indonesian sailing vessels

Literally, the word pinisi refers to a type of rigging of Indonesian sailing vessels. A pinisi carries seven to eight sails on two masts, arranged like a gaff-ketch with what is called 'standing gaffs' — i.e., unlike most Western ships using such a rig, the two main sails are not opened by raising the spars they are attached to, but the sails are 'pulled out' like curtains along the gaffs which are fixed at around the centre of the masts.

A sailing barge is a kind of barge propelled by sails. Traditional types of sailing barges include:

The following outline is provided as an overview of and topical guide to sailing:

SB <i>Centaur</i> British wooden Thames sailing barge

SB Centaur is a wooden Thames sailing barge, built in Harwich, Essex, England in 1895. She was used to carry various cargoes, mainly grain, for the next 60 years. During the First World War she carried food and coal to the French Channel ports. During the Second World War Centaur was damaged when sailing to assist with the Dunkirk Evacuation. She did war work for the duration of the conflict.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".



  1. 1 2 3 "scow" . Oxford English Dictionary (Online ed.). Oxford University Press. (Subscription or participating institution membership required.)
  2. Jay C. Martin, "Scows, and Barges, or Other Vessels of Box Model" International Journal of Maritime History 30 (February 2018).
  3. George Spencer
  4. Septimus Meiklejohn
  5. Lake Erie
  6. Mahurangi
  7. "The Daily Southern Cross", 26 April 1873.
  8. Kauri Timber Company
  9. Subritzky
  10. Waiuku Historical Society
  11. New Zealand trading scows
  12. Jane Gifford
  13. Sedgwick, Kent (2010). "British Columbia Historical News: The East Line Section of The Grand Trunk Pacific Railway in Central BC". 43 (1): 15 (13).
  14. Fortin, Ayla (1999). "Okanagan Historical Society: Early Ferry Transportation and the Okanagan Lake Floating Bridge". 124 (122).
  15. Unrau, Harlan D. (2007). Historic Resource Study: Chesapeake & Ohio Canal (PDF). Hagerstown, Md.: U.S. Department of the Interior, National Park Service, Chesapeake & Ohio Canal National Historical Park. LCCN   2007473571 . Retrieved 2013-05-12.
  16. Unrau, p. 759.
  17. Martinez, Peter (4 November 2019). "Powerful storm dislodges old iron boat closer to Niagara Falls".
  18. NCESA
  19. Boyd, James (September 19, 2015). "The semi-flying Mini scow". The Daily Sail . France. Retrieved March 5, 2016. We look at Simon Koster's new weapon, penned by Michel Desjoyeaux's design firm Mer Forte

General bibliography