Development | |
---|---|
Location | United States |
Year | 1987 |
Builder(s) | Hunter Marine |
Name | Hunter 33.5 |
Boat | |
Displacement | 11,000 lb (4,990 kg) |
Draft | 4.50 ft (1.37 m) |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 33.33 ft (10.16 m) |
LWL | 26.83 ft (8.18 m) |
Beam | 10.92 ft (3.33 m) |
Engine type | Diesel inboard motor |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 4,500 lb (2,041 kg) |
Rudder(s) | internally-mounted spade-type rudder |
Rig | |
Rig type | B&R rig |
I foretriangle height | 39.16 ft (11.94 m) |
J foretriangle base | 11.67 ft (3.56 m) |
P mainsail luff | 43.16 ft (13.16 m) |
E mainsail foot | 13.50 ft (4.11 m) |
Sails | |
Sailplan | Fractional B&R rigged sloop |
Mainsail area | 291.33 sq ft (27.065 m2) |
Jib/genoa area | 228.50 sq ft (21.228 m2) |
Total sail area | 519.83 sq ft (48.294 m2) |
Racing | |
PHRF | 147 (average) |
The Hunter 33.5 is an American sailboat that was designed for cruising and first built in 1987. [1] [2]
The Hunter 33.5 design was developed into the Moorings 335 in 1988, as a charter version for Moorings Yacht Charter. [1]
The design was built by Hunter Marine in the United States, but it is now out of production. [1] [2]
The Hunter 33.5 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop B&R rig, a raked stem, a walk-through reverse transom, an internally-mounted spade-type rudder controlled by a wheel and a fixed fin keel. It displaces 11,000 lb (4,990 kg) and carries 4,500 lb (2,041 kg) of ballast. [1]
The boat has a draft of 4.50 ft (1.37 m) with the standard keel fitted. It was also available with a bulb wing keel, an elliptical wing keel or a Collins tandem keel. [1]
The boat is fitted with a diesel engine. The fuel tank holds 42 U.S. gallons (160 L; 35 imp gal) and the fresh water tank has a capacity of 56 U.S. gallons (210 L; 47 imp gal). [1]
The design has a PHRF racing average handicap of 147 with a high of 156 and low of 141. It has a hull speed of 6.96 kn (12.89 km/h). [3]
Yacht designer Robert Perry wrote a review of the design in 2000 for Sailing magazine. He described the boat as, "The sailplan shows this to be a handsome design with, by today's standards, moderate freeboard, short ends and a clean wedge-shaped house. Initially, I was struck by the tall fractional rig." He concluded, "The basic hull shape is pretty conservative. The stern is broad to help with sailing length, cockpit size and accommodations aft, although not necessarily in that order. I like the short bow overhang." [4]
Related development
Similar sailboats
The CS 33 is a Canadian sailboat, that was designed by Raymond Wall and first built in 1979. The design is out of production.
The Mirage 30 is a Canadian sailboat, that was designed by American Robert Perry and first built in 1983. The design is out of production.
The Abbott 33 is a Canadian sailboat, that was designed by Jan Torben Larsen and Abbott Boats and first built in 1981.
The C&C 101 is an American sailboat, that was designed by Tim Jackett and first built in 2012.
The C&C 131 is an American sailboat, that was designed by Tim Jackett and entered production in 2008.
The C&C 33 is a series of Canadian sailboats, that were designed by Robert W. Ball of C&C Design and first built in 1974.
The Hunter 29.5 is an American sailboat, that was designed by Rob Mazza and the Hunter Design Team and first built in 1994.
The Hunter 27 is a series of American sailboats, that were first built in 1974.
The Hunter 33-2, also referred to as the Hunter 33-2004, is an American sailboat, that was designed by Glenn Henderson and first built in 2004.
The Nonsuch 324 is a Canadian sailboat, that was designed by Mark Ellis Design and first built in 1994. It was the last of the series of Nonsuch sailboats built.
The Nonsuch 33 is a Canadian sailboat, that was designed by Mark Ellis Design and first built in 1988.
The Endeavour 33 is an American sailboat, that was designed by Bruce Kelley and first built in 1983.
The C&C 45, also known as the IMS 45, is an American sailboat, that was designed by William Tripp III and first built in 2000.
The C&C SR 33 is a racing sailboat that was designed by Glenn Henderson and first built in 1992.
The Hunter 27-3 and Hunter 27X are a family of American sailboats that were both designed by Glenn Henderson and both first built in 2006.
The Marlow-Hunter 33 is an American sailboat that was designed by Glenn Henderson and the Hunter Design Team and first built in 2012.
The Moorings 335 is an American sailboat that was designed for Moorings Yacht Charter and first built in 1988.
The Moorings 335 is an American sailboat that was designed by the Hunter Design Team for Moorings Yacht Charter and first built in 1994.
The Hunter 340 is an American sailboat that was designed by the Hunter Design Team as cruising sailboat and first built in 1997.
The Watkins 33, also marketed as the Seawolf 33, is an American sailboat that was designed by William H. Tripp Jr and Watkins Yachts as a cruiser and first built in 1984.