ETAP 26

Last updated

ETAP 26
Development
Designer E. G. van de Stadt
Location Belgium
Year1982
No. built500
Builder(s) ETAP Yachting
Role Cruiser
NameETAP 26
Boat
Displacement 5,084 lb (2,306 kg)
Draft 5.25 ft (1.60 m) with keel down
Hull
Type monohull
Construction glassfibre
LOA 25.75 ft (7.85 m)
LWL 21.65 ft (6.60 m)
Beam 9.02 ft (2.75 m)
Engine type inboard motor
Hull appendages
Keel/board type lifting keel
Ballast1,568 lb (711 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig type Bermuda rig
I foretriangle height29.36 ft (8.95 m)
J foretriangle base9.68 ft (2.95 m)
P mainsail luff29.20 ft (8.90 m)
E mainsail foot9.84 ft (3.00 m)
Sails
Sailplan fractional rigged sloop
Mainsail area143.66 sq ft (13.346 m2)
Jib/genoa area142.10 sq ft (13.202 m2)
Total sail area285.77 sq ft (26.549 m2)
ETAP 26i  

The ETAP 26 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1982. [1] [2] [3]

Contents

Production

The design was built by ETAP Yachting in Belgium between 1982 and 1989, with 500 boats completed, but it is now out of production. [1] [3] [4]

Design

The ETAP 26 is a recreational keelboat, built predominantly of glassfibre, with wood trim. It has a fractional sloop rig, a raked stem, plumb transom, an internally mounted spade-type rudder controlled by a tiller and a lifting keel. It displaces 5,084 lb (2,306 kg) and carries 1,568 lb (711 kg) of ballast. [1] [3]

The boat has a draft of 5.25 ft (1.60 m) with the lifting keel extended and 3.11 ft (0.95 m) with it retracted, allowing ground transportation on a trailer. [1]

The boat is fitted with an inboard engine with a saildrive for docking and manoeuvring. The fuel tank holds 7 U.S. gallons (26 L; 5.8 imp gal). [1] [3] [5]

The design has sleeping accommodation for five people, with a double "V"-berth in the bow cabin and two straight settee quarter berths in the main cabin with a drop-leaf table that allows one to be converted to a double berth. The galley is located on the port side just forward of the companionway ladder. The galley is L-shaped and is equipped with a two-burner stove, an icebox and a sink. A navigation station is amidships, on the starboard side. The head is located just aft of the bow cabin. [1] [3] [5]

For sailing downwind the design may be equipped with a spinnaker. [1] [3]

The design has a hull speed of 6.24 kn (11.56 km/h). [3]

Operational history

The boat was at one time supported by a class club, the ETAP Owners Association. [6]

A 2009 review in Yachting Monthly stated, "the largest of the lifting-keel Etaps, launched in 1981, the 26 manages a proper heads compartment amidships and an inboard engine powering a saildrive. She is designed to right herself with the keel fully up, but many owners tend to sail with it permanently down, because the mechanism for lifting this large chunk of ballast manually requires a good 15 minutes of winch-grinding at the foot of the mast. Some 26s have an electric servo motor to relieve this burden. The deck-stepped 7/8 fractional rig has sweptback spreaders and an adjustable backstay. All sail controls are led back to the cockpit. She is fast and commendably stiff under sail, and goes well to windward with a tacking angle of 75-80°, but needs to be sailed fairly flat to avoid weather helm. She has an unusual cabin layout, dictated by the large lifting keel. The chart table is at the forward end of the saloon and the navigator is obliged to work sitting sideways-on. She has four sea-going berths, or potentially five at anchor: two straight settees in the saloon, one of which converts to a double, and a vee-berth in the forepeak." [5]

See also

Related Research Articles

The ETAP 20 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1975.

The ETAP 22i is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1983.

The ETAP 23 is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1982.

The ETAP 23iL is a Belgian trailerable sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.

The ETAP 28i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1988.

The ETAP 30 is a Belgian sailboat that was designed by Jacques de Ridder as a cruiser and first built in 1994.

The ETAP 30i is a Belgian sailboat that was designed by French designers Mortain & Mavrikios, as a cruiser and first built in 1995.

The ETAP 32i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1992.

The ETAP 39s is a Belgian sailboat that was designed by Slovenian designers J&J Design, as a cruiser and first built in 1998.

The ETAP 38i is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1989.

The ETAP 35i is a Belgian sailboat that was designed as a cruiser and first built in 1992.

The ETAP 26i is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1994.

<span class="mw-page-title-main">ETAP 34s</span> Sailboat class

The ETAP 34s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 1997.

The ETAP 24i is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 1999.

The ETAP 32s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 2003.

The ETAP 37s is a Belgian sailboat that was designed by Mortain & Mavrikios as a cruiser and first built in 2003.

The ETAP 26s is a Belgian trailerable sailboat that was designed by Marc-Oliver von Ahlen as a cruiser and first built in 2005.

The ETAP 28s is a Belgian sailboat that was designed by Marc-Oliver von Ahlen, with the interior designed by Stile Bertone, as a cruiser and first built in 2007.

The ETAP 48Ds is a Belgian sailboat that was designed by Marc-Oliver von Ahlen, with the interior designed by Stile Bertone, as a cruiser and first built in 2009.

The Seaward Eagle, sometimes called the Seaward Eagle 32, is an American sailboat that was designed by Nick Hake as a cruiser and first built in 1996.

References

  1. 1 2 3 4 5 6 7 McArthur, Bruce (2020). "ETAP 26 sailboat". sailboatdata.com. Archived from the original on 2 April 2021. Retrieved 2 April 2021.
  2. McArthur, Bruce (2021). "E. G. Van de Stadt 1910 - 1999". sailboatdata.com. Archived from the original on 11 March 2021. Retrieved 2 April 2021.
  3. 1 2 3 4 5 6 7 Sea Time Tech, LLC (2022). "ETAP 26". sailboat.guide. Archived from the original on 17 April 2022. Retrieved 17 April 2022.
  4. McArthur, Bruce (2021). "Etap Yachting". sailboatdata.com. Archived from the original on 23 March 2021. Retrieved 2 April 2021.
  5. 1 2 3 "Etap 26". Yachting Monthly. 5 August 2009. Archived from the original on 2 April 2021. Retrieved 2 April 2021.
  6. McArthur, Bruce (2021). "Etap Owners Association". sailboatdata.com. Archived from the original on 23 March 2021. Retrieved 27 March 2021.