The endpin is the component of a cello or double bass that makes contact with the floor to support the instrument's weight. It is made of metal, carbon fiber, or, occasionally, wood, and is typically extensible from the bottom of the instrument, secured there with a thumbscrew or other tightening mechanism. Most bass clarinets and contrabassoons also have a similar fixture. Endpins became a standard part of the cello in the mid-19th century. Before then, celli were held tightly with the legs. Some performers of pieces of baroque music continue to not use an endpin during period performances. [1] The endpin is widely credited to making the cello more appealing to play for women, who were before compelled to hold the instrument on the floor due to the complicated dress and fashion of the time. [1]
Endpins are usually tipped with a point to stick into the floor, which is sometimes capped with black rubber to preserve the floor's surface and provide friction. Generally, endpins are parallel to the long axis of the instrument, but some cellists and bassists fit their instruments with a Tortelier-style endpin, which angles more towards the floor, improving mobility at the expense of stability. Also, some endpins have a secondary extension for tall musicians. The endpin also may have notches cut in it, allowing it to have extra holding strength at these points. This design is particularly common on string basses and beginning-level cellos. The former often require these because of their greater weight.
Left-hand pressure on a cello fingerboard, acting against the fulcrum of the player's chest and/or knees, may cause the endpin to slip forward on the floor. To prevent this slippage, objects known as "endpin stoppers", "pinstops", "donuts", "black holes", "endpin anchors", "endpin holders", "spike holders" or "rock stops" are sometimes used.
One type of endpin stopper is placed between the endpin and the floor to add surface area and enhance friction, and stands alone. With this sort, the base must be made out of a non-slippery material like rubber. One very common type consists of a pliable disc surrounding a circular cup to hold the endpin's tip, such as the "Sure-Stop".
A different sort of endpin stopper uses the musician's chair as an anchor. T-shaped wooden stoppers are anchored by placing the top of the T behind the chair legs. Straight plank stoppers use one or two straps with loops at the end which are anchored around the chair legs. Since in this case the distance from the stopper to the chair is usually fixed, such stoppers typically have a line of dents running down the plank, allowing the instrument's angle to be adjusted by placing the endpin in a different dent.
Basses do not always require stoppers, being heavier and usually played in a more vertical orientation than a cello. However, bassists often use rockstops when sitting on a stool or when playing on high-glossed floors or uneven surfaces.
Pointed endpins can cause extensive damage, especially to tile and wooden flooring. Many music rooms bear evidence of this in a myriad of small holes or chips. Here, rubber tips and/or stoppers are beneficial. On carpet, the damage is less extensive. The bare tip is thus most effective in outdoor conditions, carpeted areas, and old flooring where the damage will not be as serious. However, the sharper the endpin, the more likely it is to go through the standard rubber tip.
The cello ( CHEL-oh; plural celli or cellos) or violoncello ( VY-ə-lən-CHEL-oh; Italian pronunciation: [vjolonˈtʃɛllo]) is a bowed (sometimes plucked and occasionally hit) string instrument of the violin family. Its four strings are usually tuned in perfect fifths: from low to high, C2, G2, D3 and A3. The viola's four strings are each an octave higher. Music for the cello is generally written in the bass clef, with tenor clef, or alto clef, and treble clef used for higher-range passages.
The double bass, also known simply as the bass, is the largest and lowest-pitched bowed string instrument in the modern symphony orchestra. Similar in structure to the cello, it has four, although occasionally five, strings.
A drum kit – also called a drum set, trap set or simply drums – is a collection of drums, cymbals and other percussion instruments, which are set up on stands to be played by a single player, with drumsticks held in both hands and the feet operating pedals that control the hi-hat cymbal and the beater for the bass drum. A drum kit consists of a mix of drums and idiophones – most significantly cymbals, but can also include the woodblock and cowbell. In the 2020s, some kits also include electronic instruments. Also, both hybrid and entirely electronic kits are used.
Flooring is the general term for a permanent covering of a floor, or for the work of installing such a floor covering. Floor covering is a term to generically describe any finish material applied over a floor structure to provide a walking surface. Both terms are used interchangeably but floor covering refers more to loose-laid materials.
In music, a bow is a tensioned stick which has hair coated in rosin affixed to it. It is moved across some part of a musical instrument to cause vibration, which the instrument emits as sound. The vast majority of bows are used with string instruments, such as the violin, although some bows are used with musical saws and other bowed idiophones.
A mat is a hard floor covering that generally is placed on a floor or other flat surface. Mats serve a range of purposes including:
A doorstop is an object or device used to hold a door open or closed, or to prevent a door from opening too widely. The same word is used to refer to a thin slat built inside a door frame to prevent a door from swinging through when closed. A doorstop (applied) may also be a small bracket or 90-degree piece of metal applied to the frame of a door to stop the door from swinging (bi-directional) and converting that door to a single direction. The doorstop can be a separate part or integrated with a hinge or door closer. Also called a tanogen.
Laminate flooring is a multi-layer synthetic flooring product fused together with a lamination process. Laminate flooring simulates wood with a photographic applique layer under a clear protective layer. The inner core layer is usually composed of melamine resin and fiber board materials. There is a European Standard No. EN 13329:2000 specifying laminate floor covering requirements and testing methods.
Underlay may refer to flooring or roofing materials, bed padding, or a musical notation.
Vinyl composition tile (VCT) is a finished flooring material used primarily in commercial and institutional applications. Modern vinyl floor tiles and sheet flooring and versions of those products sold since the early 1980s are composed of colored polyvinyl chloride (PVC) chips formed into solid sheets of varying thicknesses by heat and pressure. Floor tiles are cut into modular shapes such 12-by-12-inch squares or 12-by-24-inch rectangles. In installation the floor tiles or sheet flooring are applied to a smooth, leveled sub-floor using a specially formulated vinyl adhesive or tile mastic that remains pliable. In commercial applications some tiles are typically waxed and buffed using special materials and equipment.
The electric upright bass (EUB) is an instrument that can perform the musical function of a double bass. It requires only a minimal or 'skeleton' body to produce sound because it uses a pickup and electronic amplifier and loudspeaker. Therefore, a large resonating structure is not required to project the sound into the air. This minimal body greatly reduces the bulk and weight of the instrument. EUBs must always be connected to an amplifier and speaker cabinet to produce an adequate audible sound. The EUB retains enough of the features of the double bass so that double bass players are able to perform on it.
Interface, Inc., is a global manufacturer of commercial flooring with an integrated collection of carpet tiles and resilient flooring, including luxury vinyl tile (LVT) and nora brand rubber flooring.
A variety of methods are used to tune different stringed instruments. Most change the pitch produced when the string is played by adjusting the tension of the strings.
A violin consists of a body or corpus, a neck, a finger board, a bridge, a soundpost, four strings, and various fittings. The fittings are the tuning pegs, tailpiece and tailgut, endpin, possibly one or more fine tuners on the tailpiece, and in the modern style of playing, usually a chinrest, either attached with the cup directly over the tailpiece or to the left of it. There are many variations of chinrests such as clamped to the body in the center, on either side of the tailpiece as with a Guaneri style chinrest or to the left of the tailpiece.
Gym floor covers can either be a carpet-based protection system or is a large plastic tarp, similar to a painters tarp, usually divided into equal sections 6 to 10 feet wide each to cover up the entire gym floor. Gym floor covers are available in roll or tile systems. These covers are often used in large venues designed for athletic events when non-athletic events are being held there such as receptions, award ceremonies, indoor track meets, gymnastic events and graduations.
Wood flooring is any product manufactured from timber that is designed for use as flooring, either structural or aesthetic. Wood is a common choice as a flooring material and can come in various styles, colors, cuts, and species. Bamboo flooring is often considered a form of wood flooring, although it is made from a grass (bamboo) rather than a timber.
The string section is composed of bowed instruments belonging to the violin family. It normally consists of first and second violins, violas, cellos, and double basses. It is the most numerous group in the typical Classical orchestra. In discussions of the instrumentation of a musical work, the phrase "the strings" or "and strings" is used to indicate a string section as just defined. An orchestra consisting solely of a string section is called a string orchestra. Smaller string sections are sometimes used in jazz, pop and rock music and in the pit orchestras of musical theatre.
Sustainable Slip Resistance is a particular floor friction testing method and selection criteria for use in choosing and sourcing slip-resistant flooring that maintains good tribological characteristics over its life cycle to minimize slip and fall accidents. Testing floors before and after they are in place on a property can assure a building owner that safe flooring has been chosen and installed for its intended use. This floor slip resistance testing method, developed by the McDonald's Restaurant chain and now specified by many other property owners assesses the effects of mild abrasion on wet slip resistance. This test identifies flooring that has a high propensity to lose its wet slip resistance.
Floor slip resistance testing is the science of measuring the coefficient of friction of flooring surfaces, either in a laboratory or on floors in situ. Slip resistance testing is usually desired by the building's owner or manager when there has been a report of a slip and fall accident, when there has been a report of a near accident, or (preferably) before the flooring is installed on the property. Flooring is tested using a tribometer to discover if there is a high propensity for slip and fall accidents on it, either dry and/or when wet with water or lubricated with other contaminants such as kitchen grease, hydraulic oil, etc. There have been numerous floor slip resistance testing tribometers and lab devices produced around the world to measure both the static (stationary) and dynamic coefficient of friction, but presently there are only a few that have been proven to be reliable for obtaining useful safety results and that have current official test methods. If an instrument has no official published test method, then there is a problem with the instrument, often being poor precision.
Playing the cello is done while seated with the instrument supported on the floor. The fingertips of the left hand stop the strings on the fingerboard to determine the pitch of the fingered note. The right hand plucks or bows the strings to sound the notes.