Falconar SAL Mustang

Last updated

SAL Mustang
Role Amateur-built aircraft
National origin Canada
Manufacturer Falconar Avia
Manna Aviation
Introduction1969
StatusIn production (2019)
Number built18 (2012)
Developed from Jurca Gnatsum

The Falconar SAL Mustang, also called the 2/3 Mustang and the SAL P-51D Mustang is a Canadian amateur-built aircraft, originally produced by Falconar Avia and introduced in 1969. The aircraft is a 2⁄3 scale replica of the North American P-51 Mustang and is supplied as a kit or as plans for amateur construction. [1] [2]

Contents

Since the winding up of business by Falconar Avia in 2019, the plans are now sold by Manna Aviation. [3]

Design and development

In 1963 Falconar partnered with designer Marcel Jurca to produce the Jurca Gnatsum. By 1967, Falconar recommended a large number of changes to the design, which resulted in Jurca leaving the project. The modified aircraft was developed as the SAL Mustang and first flown in 1971 after significant cost overruns. Falconar Aircraft Ltd was sold to George F. Chivers and other investors, and operated as Sturgeon Air Ltd (SAL) with Falconar as an employee until 1973. [4]

The SAL Mustang features a cantilever low-wing, a single-seat, or optionally a two-seats-in-tandem, enclosed cockpit under a bubble canopy, retractable conventional landing gear, including a manually retractable tailwheel and a single engine in tractor configuration. [1] [2]

The aircraft is made from wood covered with fibreglass cloth and doped aircraft fabric. Some parts, like the belly air scoop are made from fibreglass. Its 24.8 ft (7.6 m) span wing has an area of 110 sq ft (10 m2) and mounts flaps that may be electrically or manually operated. The cockpit is 24 in (61 cm) wide and the bubble canopy is jettisonable. The aircraft's recommended engine power range is 200 to 350 hp (149 to 261 kW). Engines that have been used include the 200 hp (149 kW) Lycoming IO-360 horizontally opposed engine, the 200 hp (149 kW) Ranger L-440 inverted inline, the 180 to 235 hp (134 to 175 kW) Avia M 337 inverted inline, 230 hp (172 kW) Continental O-470 horizontally opposed, the 200 hp (149 kW) Ford 230 cu in (3.77 L) V6 automotive conversion, as well as other automotive V-6 or V-8 powerplants. Construction time from the supplied kit is estimated as 2500 hours. [1] [2] [5]

The paper plans supplied total an area of 450 sq ft (42 m2), weigh 13 lb (5.9 kg) and include a construction manual. An alternative set of plans allows constructing a tandem two-seat version. The plans are very detailed and complete and one builder rated them as "the best I have seen on any homebuilt airplane". [1] [2] [5]

Operational history

The prototype was introduced at the 1971 EAA airshow painted in the same gold and red colors as the Canadian Golden Hawks airshow team. [6]

In July 2012 the manufacturer indicated that 18 examples had been completed and flown in the 43 years that the plans and kits had been available. [5]

Specifications (SAL Mustang)

Data from Kitplanes and Purdy [1] [2]

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">Thorp T-18</span> American homebuilt aircraft

The Thorp T-18 is an American, two-place, all-metal, plans-built, homebuilt aircraft designed in 1963 by John Thorp.

<span class="mw-page-title-main">Titan T-51 Mustang</span> American homebuilt airplane

The Titan T-51 Mustang is a three-quarter scale replica of the P-51 Mustang that was designed by Titan Aircraft owner John Williams. It is a two-seat homebuilt aircraft with dual controls and tandem seats, and has remarkable performance given the small size of the engine.

<span class="mw-page-title-main">Luton Major</span>

The Luton L.A.5 Major was a 1930s British two-seat high-wing cabin monoplane. Following World War II, plans were made available to suit construction as a homebuilt aircraft.

The Falconar AMF-S14 Maranda is a two-seat, light aircraft first flown in Canada in 1961 and originally marketed for amateur construction by Falconar Avia.

<span class="mw-page-title-main">Jurca Gnatsum</span> Series of homebuilt replica fighter aircraft

The Jurca Gnatsum is a French homebuilt near scale replica aircraft based on the North American P-51 Mustang.

<span class="mw-page-title-main">Jurca Sirocco</span> French homebuilt airplane

The Jurca MJ-5 Sirocco is a two-seat sport aircraft designed in France in the early 1960s and marketed for homebuilding. It is one of many wooden homebuilt designs from Romanian born designer Marcel Jurca. Jurca, a Henschel Hs 129 pilot in World War II marketed the plans in Canada and America through Falconar Aviation. It is a low-wing cantilever monoplane of conventional configuration and wooden construction throughout. The tandem seats are enclosed by a bubble canopy, and the tailwheel undercarriage can be built as either fixed or with retractable main units. Marcel Jurca died on 19 October 2001, at which time plans were still available from the designer's website.

<span class="mw-page-title-main">Fisher Celebrity</span> Canadian ultralight aircraft

The Fisher Celebrity is a Canadian two-seat, conventional landing gear, single engined, biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States but the company is now located in Dorchester, Ontario, Canada.

The Jurca MJ-51 Sperocco is a plans-built two-seat tandem aerobatic aircraft derived from the Jurca MJ-5 Sirocco.

The W.A.R. P-51 Mustang is a 53% near-scale homebuilt replica of a North American P-51 Mustang fighter.

The Pop's Props Zing is a single seat, open-cockpit, parasol wing, single-engine monoplane, first flown in 1996. The aircraft was designed by Scott Land and produced by Pop's Props of Cooksville, Illinois in the form of plans and an aircraft kit. The company is no longer in business and the aircraft kit is now available from Simplex Aeroplanes of Old Saybrook, Connecticut.

The Carlson Criquet is an American, two-seats-in-tandem, high wing, strut-braced, single engine, homebuilt aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio in kit form. The prototype was completed in 1999.

<span class="mw-page-title-main">Falconar Golden Hawk</span> Canadian homebuilt light aircraft

The Falconar Golden Hawk is a Canadian tandem seat, pusher configuration, tricycle gear, canard-equipped ultralight aircraft that is offered in kit form by Falconar Avia of Edmonton, Alberta.

<span class="mw-page-title-main">St-Just Super-Cyclone</span> Canadian amateur-built aircraft

The St-Just Super-Cyclone is a Canadian amateur-built aircraft that was at one time produced by St-Just Aviation of Boucherville, Quebec. By 2023 production had passed to Bushliner Aircraft Manufacturing of Granite Falls, Washington who were building it as the Bushliner 1850EX. The aircraft is supplied as plans or as a kit for amateur construction.

The Falconar AMF-14H Maranda is a Canadian amateur-built aircraft, designed and originally produced by Falconar Avia for the Canadian basic ultralight class and US light-sport aircraft category. The aircraft is supplied as a kit or as plans for amateur construction.

<span class="mw-page-title-main">Falconar F11 Sporty</span> Canadian homebuilt light aircraft

The Falconar F11 Sporty is a Canadian amateur-built aircraft, that was designed by Chris Falconar and produced by Falconar Avia. Falconar supplied it as a kit or as plans for amateur construction. Today both the F11A and E models are available as plans from Manna Aviation.

<span class="mw-page-title-main">Falconar F12A Cruiser</span> Canadian homebuilt light aircraft

The Falconar F12A Cruiser is a Canadian amateur-built aircraft, designed by Chris Falconar and originally produced as a kit by Falconar Avia. The aircraft is now supplied as plans for amateur construction by Manna Aviation.

The Falconar F9A and F10A are a family of Canadian amateur-built aircraft, that were designed by Chris Falconar and produced by Falconar Avia. The F9A design was introduced in 1965 and both the F9A and F10A were supplied as kits or as plans for amateur construction by Falconar. The F9A and F10A are now available in the form of plans from Manna Aviation.

<span class="mw-page-title-main">Falconar Minihawk</span> Canadian homebuilt light aircraft

The Falconar Minihawk is a Canadian amateur-built aircraft, originally produced by Falconar Avia. The aircraft is supplied as a kit or plans for amateur construction.

<span class="mw-page-title-main">Frontier MD-II</span> American homebuilt aircraft

The Frontier MD-II was an American homebuilt aircraft that was designed and supplied as a kit by Frontier Aircraft Inc of Vail, Colorado, introduced in the 1990s.

<span class="mw-page-title-main">Stewart S-51D Mustang</span> American homebuilt fighter replica

The Stewart S-51D Mustang is an American aerobatic homebuilt aircraft that was designed by Jim Stewart and produced by Stewart 51 of Vero Beach, Florida, introduced in 1994. When it was available the aircraft was supplied as a kit for amateur construction.

References

  1. 1 2 3 4 5 Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 52. Belvoir Publications. ISSN 0891-1851
  2. 1 2 3 4 5 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 154. BAI Communications. ISBN   0-9636409-4-1
  3. ↑ Falconar Avia (30 June 2019). "Notification of Closure". falconaravia.com. Archived from the original on 4 July 2019. Retrieved 4 July 2019.
  4. ↑ "A Chip off the old blockbuster". Air Progress. November 1971.
  5. 1 2 3 Falconar Avia (1 July 2012). "SAL 2/3 "Mustang"" . Retrieved 11 November 2012.
  6. ↑ "A Chip off the old blockbuster". Air Progress: 34. November 1971.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.