GM Zeta platform | |
---|---|
Overview | |
Manufacturer | Holden (General Motors) |
Also called | Global RWD Architecture |
Production | 2006–2017 |
Body and chassis | |
Class | Full-size |
Body style(s) | 2-door coupe 2-door convertible 2-door coupé utility 4-door sedan 5-door Station wagon |
Chronology | |
Predecessor | GM B platform ( for the 4th generation Caprice for the police in North America) GM V platform (RWD) GM F platform (for the Chevrolet Camaro) |
Successor | GM Alpha platform (for the Chevrolet Camaro) GM Epsilon platform (for the Holden Commodore and Holden Caprice) GM Omega platform (RWD) (Full Size) |
Zeta was the original name for General Motors' full-size rear-wheel drive automobile platform developed by GM's Australian subsidiary company Holden and was at one stage referred to as the "GM Global RWD Architecture". The GM Zeta platform replaced the V-body, and debuted with 2006 Holden Commodore (VE) sedan and Holden (VE) Ute. This platform was considered as the replacement for the North American W, H, and K platforms until plans were cancelled due to fuel-economy considerations and GM's financial situation. Although the future of the Zeta program was in doubt at that time, in May 2009, Holden began the development of an improved second version of the platform that went on to form the basis of the 2013 Commodore (VF) and Chevrolet SS. [1] [2]
The 2010-15 fifth generation Chevrolet Camaro was the only Zeta platform model produced in North America. All other Zeta platform vehicles have been manufactured in Australia by Holden. In 2016, the Chevrolet Camaro (sixth generation) debuted on the GM Alpha platform.
Australian manufactured models include the long-wheelbase Holden WM Statesman/Caprice sedan and the high performance range produced by Holden Special Vehicles. On export markets, Holden-based models included the:
In December 2013, Holden announced that it will cease its local production by 2017 and, with it, the production of the GM Zeta platform. Production ended in October 2017. [4]
Development was started in late 1999 by Holden to replace the aging V-body platform underpinning the third generation Commodore that debuted in 1997, after Opel announced that its Omega (on which the Commodore was based) would be discontinued. Principal development on the VE Commodore was completed by July 2004 at a cost approaching A$1 billion and the first testing mules underwent trials later that year. Unlike previous Holden platforms, the platform was designed around the LWB Caprice and Statesman initially and then shortened to create the Commodore. General Motors global corporate headquarters was impressed by the VE design and began studies on using the underlying architecture (internally christened Zeta by GM engineers) for a range of future products on a global scale. After the cancellation of the plan due to the fuel-economy considerations and GM's financial situation, the idea of Zeta as a global rear drive platform was revived with plans for the fifth generation Chevrolet Camaro of 2010.
The Zeta architecture was designed for great flexibility and could accommodate a wide variety of automotive features such as wheelbase length, ride height, windshield rake and roof line. Zeta's suspension system was all wheel independent and utilizes a MacPherson strut coupled with a dual ball joint lower A-arm for the front and a four link independent setup for the rear wheels. The engine was mounted slightly behind the front axle giving improved weight distribution.
In May 2009, Holden began the re-engineering of the Zeta platform to create a lighter, stronger, better handling and more fuel efficient version. [2] The improved second version of the platform formed the basis of the 2013 Commodore (VF), which also spawned the 2013 Chevrolet SS that GM announced in May 2012 for the US market. This Chevrolet made its debut at the 2013 Daytona Shootout. The Holden VF Commodore, on which the Chevrolet SS is based, went on sale the same day in Australia. [5]
In December 2013, Holden announced the end, at the Elizabeth plant in South Australia by the end of 2017 and, with it, that of the Zeta platform. Sigma-based vehicles that shared design engineering with Zeta transitioned to the Alpha platform, which used Zeta as its basis. In particular, the Chevrolet Camaro transitioned to the Alpha platform in November 2015, with the launch of the 2016 sixth generation model.
The vehicles that have used the Zeta platform include:
Holden, formerly known as General Motors-Holden, was an Australian subsidiary of General Motors. It was an automobile manufacturer and importer which sold cars under its own marque. In its last three years, it switched entirely to importing cars. It was headquartered in Port Melbourne, with major industrial operations in the states of South Australia and Victoria. The 164 year old company ceased trading under the Holden nameplate and marque in 2020.
The Holden Commodore is a full-size car that was sold by Holden from 1978 to 2020. It was manufactured from 1978 to 2017 in Australia and from 1979 to 1990 in New Zealand, with production of the locally manufactured versions in Australia ending on 20 October 2017.
The Chevrolet Caprice is a full-sized automobile produced by Chevrolet in North America for the 1965 to 1996 model years. Full-size Chevrolet sales peaked in 1965 with over a million sold. It was the most popular American car in the sixties and early seventies, which, during its lifetime, included the Biscayne, Bel Air, and Impala.
The Holden Monaro is a rear-wheel drive coupé manufactured by General Motors Holden in Australia from 1968 to 1975 and later reintroduced from 2001 to 2005. It was also manufactured as a 4-door sedan from 1973 to 1977.
Holden Special Vehicles (HSV) was the officially designated performance vehicle division of Holden. Established in 1987 and based in Clayton, Victoria, the company modified Holden models such as the standard wheelbase Commodore, long wheelbase Caprice and Statesman, and commercial Ute for domestic and export sale. HSV also modified other non-Holden cars within the General Motors lineup in low volumes.
Epsilon is General Motors' mid-size front-wheel drive automobile platform. The architecture was multi-division project of GM North America, Opel and Saab, and debuted in the 2002 Opel Vectra and 2003 Saab 9-3. Since this platform falls squarely in the center of the worldwide automobile market, GM plans to produce a great many Epsilon vehicles with over a dozen variations. As of 2005, it was GM's highest volume worldwide platform. Even after the dissolution of the GM/Fiat partnership, both companies retain the rights to continue developing Epsilon-derived models.
"LS engine" is the colloquial name given to the 3rd and 4th generation small-block V-8 gasoline engine used in General Motors' vehicles. The name evolved from the need to differentiate the Gen 3/Gen 4 small blocks from the original Gen 1/Gen 2 small blocks released in 1954, which are commonly referred to as "Small Block Chevrolets". The "LS" name originates from the engine RPO code of the first Gen 3 small block, the LS1, introduced in the 1997 Corvette. The term "LS engine" is used to describe any Gen 3 or Gen 4 Small Block Chevrolet, including those that do not specifically include "LS" as part of their RPO code. Sometimes referred to as an "LSx", with the lower case "x" standing in for one of the many RPO code variations of the motor, the term can cause confusion since GM now sells an aftermarket LS cylinder block named "LSX" with a capital "X". The original RPO code "LS1" is still sometimes used, if not confusingly, to describe the entire Gen 3/Gen 4 engine family.
The Holden Caprice is a full-sized car which was produced by Holden in Australia from 1990 to October 2017. The similar Holden Statesman, which was also introduced in 1990 as a model below the Caprice, was discontinued in September 2010. Between 1971 and 1984, Holden marketed their long-wheelbase sedans under the Statesman marque.
The B platform is a full-size rear-wheel drive car platform produced by General Motors (GM) from 1926 to 1996. Originally made for Oldsmobile and Buick, all of General Motors's five main makes would use it at some point. It was closely related to the original rear-wheel drive C and D platforms, and was used for convertibles, hardtops, coupes, sedans, and station wagons. With approximately 12,960,000 units built, divided across four marques, the 1965-70 B platform is the fourth best selling automobile platform in history after the Volkswagen Beetle, Ford Model T and the Lada Riva.
Super Sport, or SS, is the signature performance option package offered by Chevrolet on a limited number of its vehicles. All SS models come with distinctive "SS" markings on their exterior. The SS package was first made available for the 1961 Impala. Some of the other models bearing the SS badge include the Camaro, Chevelle, El Camino, Impala, Monte Carlo, Nova and Chevrolet Pickup Truck. Current SS models are produced by the GM Performance Division.
9C1 is a code used by Chevrolet, in reference to a vehicle intended for use as a police car. Considered a fleet vehicle by General Motors, the 9C1 package is considered a Special Equipment Options (SEO) code, as opposed to a Regular Production Order (RPO) code. Both groups of options are found on the production code sticker.
The 6L80 is a six-speed automatic transmission built by General Motors at its Willow Run Transmission plant in Ypsilanti, MI. It was introduced in late 2005, and is very similar in design to the smaller 6L45/6L50, produced at GM Powertrain in Strasbourg, France. It features clutch to clutch shifting, eliminating the one-way clutches used on older transmission designs. In February 2006 GM announced that it would invest $500 million to expand the Toledo Transmission plant in Toledo, Ohio to produce the 6L80 in 2008. Torque rating 440 ft/lb. 6L90 520ft/lb.
The 4L60E is a series of automatic transmissions from General Motors. Designed for longitudinal engine configurations, the series includes 4 forward gears and 1 reverse gear. The 4L60E is the electronically commanded evolution of the Turbo-Hydramatic 700R4, originally produced in 1982.
The V platform is a rear-wheel drive automobile platform that underpinned various General Motors (GM) vehicles from 1966 through to its final discontinuation in 2007. The V platform was developed in the 1960s by the German subsidiary of GM, Opel. However, it was not without significant revision over its lifetime. The platform's phase-out began when European production ended during 2003, while the Australian variants, produced by Holden continued until 2007, after their final replacement by Zeta-derived models. The first of these Zeta cars came in 2006, with the remaining changing over in 2007. V-cars are identified by the "V" fourth character in their Vehicle Identification Number. Although completely unrelated, the "V platform" designation was also used for a series of North American front-wheel drive personal luxury coupes.
The Holden Commodore (VE) is an executive car that was produced by Holden from 2006 to 2013. It was the first iteration of the fourth generation of the Commodore. Its range included the luxury variants, Holden Berlina (VE) and Holden Calais (VE); utility models were included as the Holden Ute (VE).
The WM and WN series Holden Caprice are a line of full-size/executive cars produced by the Australian manufacturer Holden from September 2006 to October 2017, sold primarily in Australia and New Zealand. They were also exported in various guises to the United States, the Middle East, China and South Korea. The range debuted alongside the smaller VE series Holden Commodore, which the Caprice shares its "Zeta" platform with, on 16 July 2006 at the Melbourne Convention and Exhibition Centre.
General Motors New Zealand Limited, is a subsidiary of General Motors of Detroit and distributes General Motors' motor vehicles, engines, components and parts in New Zealand.
The Pontiac G8 is a full-size sedan that was produced by Holden in Australia, and then exported to the United States, where it was sold by Pontiac. The G8, a rebadged Holden Commodore, was released in early 2008 for the 2008 model year in the United States, and in 2008 for the 2009 model year in Canada. Production stopped in mid-2009, following the GM decision to suspend the Pontiac brand. While available, the G8 took the place in the Pontiac lineup of both the Pontiac Bonneville, which ceased production after the 2005 model year, and the Pontiac Grand Prix, which ceased production after the 2008 model year. The G8 was Pontiac's first full-size car since the Bonneville.
The Opel Insignia is a large family car developed and produced by the German car manufacturer Opel since 2008. Taking its name from a 2003 concept car, the model line serves as the flagship Opel car line, slotted above the Astra and Corsa in size. The Insignia serves as the successor for both the Signum and Vectra model lines, replacing both vehicles under a single nameplate. Currently in its second generation, the model line is offered in four-door sedan/saloon body styles, five-door liftback, and as a five-door station wagon/estate.
The Holden Commodore (VF) is an executive car that was produced by Holden between June 2013 and October 2017. It was the second and last significantly restyled iteration of the fourth generation of the Holden Commodore to be manufactured in Australia. Its range included the sedan and station wagon variants that sold under the luxury Holden Calais (VF) nameplate. Also available was the commercial utility variant that sold under the Holden Ute (VF) nameplate.