Indian Multi Role Helicopter | |
---|---|
Role | Multirole helicopter |
National origin | India |
Manufacturer | Hindustan Aeronautics Limited |
Design group | Rotary Wing Research and Design Center [1] |
First flight | 2024-2025 (Planned) |
Introduction | 2025-2026 (expected) [2] |
Status | Under development |
Primary user | Indian Armed Forces |
The Indian Multi Role Helicopter (IMRH) is a medium-lift helicopter currently under development by Hindustan Aeronautics Limited (HAL) for the Indian Armed Forces. It is designed for multiple roles, air assault, air-attack, anti-submarine, anti-surface, military transport and VIP transport roles. IMRH is aimed to replace all the current Mil Mi-17 and Mil Mi-8 helicopters across the Indian Armed Forces. [3]
The planned rotorcraft is expected to have a maximum takeoff weight of 13 tonnes with a five bladed main rotor and 4 bladed rotor on tail. The navalised version further will have longer range and higher payload capacity. HAL estimates requirement of over 314 rotocraft of same class across the Indian Armed Forces to replace existing Mil Mi-17 helicopters in service in India. [3]
The scaled model tests of the helicopter have been ongoing as of 2021 while first flight of a full prototype is expected in 2025–26. The introduction into the armed forces thereafter is expected in 2028, after two years of testing. A total of six prototypes are planned for trials before production.
During the late 2000s, Indian aerospace manufacturer Hindustan Aeronautics Limited (HAL), which was interested in expanding their rotorcraft offering beyond that of the existing HAL Dhruv programme, began to explore the potential for the production of a conceptual 10-tonne class helicopter; this concept came to be known as the Medium Lift Helicopter (MLH). [4] If produced, the 10-tonne MLH shall hold the distinction of being the largest rotary-wing aircraft to have ever been produced by India. [5] Early on, it was recognised that the type would be primarily marketed towards military customers, especially the Indian armed forces, and that the tentative programme would greatly benefit from the involvement of a foreign manufacturer in a partnership arrangement. [4]
Speaking in September 2008 on the company's ambitions for the MLH, HAL Chairman Ashok Baweja stated: "We plan to develop and build 10-tonne class helicopters in partnership with either the Eurocopter or the Russians... This would be a joint venture between the selected company and HAL". [4] At this point, there were public estimates of producing around 350 helicopters in the 10-tonne class, which was dependent upon the military market for medium-lift helicopters. HAL were also keen to explore the potential for export sales of the MLH, the prospects of which being recognised to greatly depend upon the foreign partner select to participate in the programme. [4]
During the late 2000s, HAL issued a formal invitation for bids from major rotorcraft manufacturers across the world to co-develop the MLH. [6] However, during July 2009, HAL reportedly cancelled its active tender for the helicopter's co-development; by this stage, both Eurocopter and Mil Helicopters had been shortlisted as potential technology and investment partners. Allegedly, HAL informed the two companies that the tender had been scrapped because of the qualitative requirements of the armed forces having substantially changed.[ citation needed ] Speaking at a national seminar held in December 2014, HAL's chief test pilot, Wing Commander Unnikrishna Pillai, gave a talk on the design challenges posed development of medium and heavy lift helicopters in India. He said that, following on from the expertise gained in earlier projects, the Rotary Wing Research and Design Centre (RWR&DC) of HAL has become confident and is well poised to develop medium lift helicopters. [7]
During early 2017, HAL reportedly re-launched its MLH proposal, now seeking to produce a 12-tonne twin-engine multipurpose helicopter; a new project name, the Indian Multi-Role Helicopter (IMRH) was also applied to the programme. [6] [8] The IMRH has been conceived for performing various missions, including troop transport, combat search and rescue, VVIP transport, ground and offshore operations, air ambulance, casualty evacuation, and cargo carriage, including under-slung loads. It is to be capable of flying at altitudes of up to 20,000 feet while transporting either a maximum of 24 personnel or a payload of 3,500 kg. [6] [9] According to HAL, the proposed helicopter can lift double the capacity that is currently available using its Dhruv advanced light helicopter, which falls within the five-tonne class. One HAL official stated that the Indian Army is estimated to require up to 400 helicopters within the MLH's class. [6] [10]
During February 2017, a full-scale mock up of the MRH was publicly displayed at Aero India 2017; according to a HAL spokesman, the mock up was largely based upon the existing Russian Mil Mi-17. [5] By this point, HAL anticipated the first flight of the helicopter to occur during 2019; however, the engine to power the MRH was yet to be finalised. Likewise, the rotorcraft's finer details have yet to be fully defined, and are to only be finalised after specifications have been received from the intended users. Additionally, operator acceptance trials have been expected to take about 7–8 years before induction. [5] In February 2017, the MLH proposal remained in the conceptual stage; it was yet to be cleared by HAL's board; accordingly, at the time, it was yet to commence formal design work. [6] [8] The intended engines to power the type are yet to be identified, while the helicopter is intended to be equipped with automatic flight control system, modern mission systems, advanced cockpit displays, and other contemporary avionics. At the time, HAL is in the process of developing a large, ₹600-crore helicopter manufacturing complex in Tumakuru; this is to be the hub of the company's rapidly expanding rotorcraft division. [6]
During May 2017, HAL issued requests for information (ROIs) in regards to elements of the Indian Multi-Role Helicopter (IMRH); the requests involved the turboshaft engines, along with assistance in the development of a blade-folding mechanism and external reviews of the rotorcraft's landing gear and transmission. [11] The landing gear is planned to be retractable and use an active steering system and self-centering capability, while the engines are to be imported, equipped with dual-channel full authority digital electronic controls (FADEC) and be capable of above-average high-altitude performance. Both the main and tail rotors are to be made of composite materials and are to be coated with radar absorbent/infrared resistant paints. [11]
In 2021, details on progress were unveiled in Aero India. The helicopter is expected to have a maximum take off weight of 13 tonnes and will have 24 to 36 crews on board in various configurations. The helicopter will have a five bladed main rotor with a diameter of 21.2 meters and a four-blade tail rotor. MRH will have 75% domestic content but will use an imported 2000 kW turboshaft engine. Payload capacity at sea level will be 4 tonnes and 1.5 tonne at a height of 13,000 ft (4,000 m). Aircraft will have pair of weapons wings which will provide four hardpoints for up to 1,600 kilograms (3,500 lb) of armaments. The aircraft passed preliminary design phase in 2021 and expects approval for further development by late 2021 or early 2022. First flight is expected 4 years after development project began while the introduction is scheduled for 2028. [12]
By 2021, the scale models have been undergoing trials, the flight of a full-sized prototype is expected in 2025-2026 ahead of the type's intended induction into the armed forces. The prototype programme is expected to involve six prototypes and have a total budget of ₹10,000 crore (US$1.2 billion). A specialised version for the Indian Navy will further be developed with greater range, a higher payload capacity and furnishings for maritime operations. [13] Till 30 March 2022, HAL completed preliminary design work and is ready for prototype development. [14]
HAL is setting up a new Helicopter Factory at Tumkur that will produce helicopters of 3 ton to 12 ton category. [15] IMRH will be the first major project to follow new manufacturing policy under Defence Acquisition Procedure (DAP) 2020. As per the policy, a private sector entity will form Special Purpose Vehicle (SPV) with HAL by acquiring 51% stake after getting minimum order assurance from Indian Armed Forces. During delivery, the company will be free to export 25% of the production to a third country. [16] An estimated ₹11,000 crore will be required as development cost for seven years and another ₹12,000 crore for setting up manufacturing facilities. The total requirement of the Indian Armed Forces is 550 units. [14]
On 6 February 2023, Prime Minister Narendra Modi dedicated the HAL Helicopter Factory at Tumakuru to the nation. The facility will have capacity to produce 1,000 helicopters of 3-15 tonne category and will meet the entire requirement of the country without import. [17] The factory will not only produce Light Utility Helicopter, Light Combat Helicopter, IMRH, Advance Light Helicopter, but will also act as Maintenance, Repair and Overhaul facility. [18]
HAL started discussions with Safran Helicopter Engines, a French engine manufacturing company, for joint development and manufacturing of the IMRH engine under a strategic partnership model. [19] [20] On 8 July 2022, HAL signed memorandum of understanding (MoU) with Safran Helicopter Engines to form a joint venture company that will be dedicated to the development, production, sales and support of the new generation helicopter engine for IMRH, including the naval variant. [21] The company will also fulfil the requirements of future helicopter projects undertaken by HAL and the Ministry of Defence. [22] HAL will hold the type certificate for the engine after development is complete, which will take three years. [23] On 15 February 2023, HAL and Safran signed work share agreement for joint development of engine. [24] In November 2023, HAL and Safran established the joint venture business, SAFHAL Helicopter Engines, for a new generation helicopter engine. [25]
In July 2024, it was reported that ANETO–1H (Hindustan variant) will be used to power the prototypes of IMRH. A contract will be signed for 12 such engines for 6 prototypes. The engines are to be delivered within a timeline of 24th to 36th month of the signing of contract. The engines will be delivered to HAL's Rotary Wing Research and Design Centre (RWRDC). [26] [27]
On 30 August 2024, HAL partnered with SAFHAL Helicopter Engines Pvt. Ltd., a joint venture between Hindustan Aeronautics Limited and Safran Helicopter Engines, to develop Aravalli engines for 13 tonne IMRH and 12.5 tonne DBMRH (maritime variant) helicopters. The engine is named after Aravalli Range of mountains in Western India. The contract was signed by S Anbuvelan, CEO (Helicopter Complex), HAL and Olivier Savin, Director, SAFHAL Helicopter Engines and EVP, Sales and Marketing, Safran Helicopter Engines and SK Mehta, Director, SAFHAL Helicopter Engines and Executive Director (Finance), HAL. [28] [29] After the contract is signed, HAL anticipates that the engine development will take at least 48 months, and the project would probably take 60 months to complete. [25] [30] [31]
During 2008, HAL stated that it intends to offer the 10-tonne MLH to the Indian Navy for the purpose of meeting its established requirement for a fleet of heavy-lift helicopters. [4] According to an official statement made during early 2017: "HAL will target export orders, aiming to replace ageing fleet of similar class of helicopters that are operational in more than 40 air forces". [6] As of 2017, a total of four distinct versions of the MRH have been planned, including a navalised maritime variant and a civilian-orientated model, for which HAL intends to achieve civil certification of. [5] [11]
HAL has commented that the company has been examining the prospects of the indigenously developed MLH essentially replacing the Mi-17 helicopters that are in widespread use both abroad and in India, especially by its heavy use by most frontline operations by the Indian Air Force; possessing broadly specifications, the fledgling rotorcraft is to be capable of performing a greater number of roles than the Russian Mi-17. [9] [10] While there has been no officially-stated requirement for a 10-12 tonne rotorcraft; however, the company has intentions for the IMRH to ultimately start replacing India's older Mi-17s after 2025. [11]
On 5 August 2019, it was reported that the process for securing government approvals for the helicopter has started. Full scale work will commence as soon as the project is approved, with first flight expected in two years. The requirement for such helicopters is reportedly of around 550 units. [32]
In July 2021, the Indian Navy formally involved itself in the project, envisaging a navalised version of the helicopter for anti-submarine and anti-surface warfare roles. As the naval variant will not perform high-altitude operations, unlike Indian Army and Indian Air Force operations, it will have higher payload capacity and longer range. It is anticipated that the navalised version will have dedicated equipment for the role, including sonar and sea-scanner radar with a customised cockpit. [13]
Data from Display at Aero India 2021 [12]
General characteristics
Performance
Armament
Related development
Aircraft of comparable role, configuration, and era
Hindustan Aeronautics Limited (HAL) is an Indian public sector aerospace and defence company, headquartered in Bengaluru (Bangalore). Established on 23 December 1940, HAL is one of the oldest and largest aerospace and defence manufacturers in the world. HAL began aircraft manufacturing as early as 1942 with licensed production of Harlow PC-5, Curtiss P-36 Hawk and Vultee A-31 Vengeance for the Indian Air Force. HAL currently has 11 dedicated Research and development (R&D) centres and 21 manufacturing divisions under 4 production units spread across India. HAL is managed by a board of directors appointed by the President of India through the Ministry of Defence, Government of India. In 2024, the company was given Maharatna status. HAL is currently involved in the designing and manufacturing of fighter jets, helicopters, jet engine and marine gas turbine engine, avionics, hardware development, spares supply, overhauling and upgrading of Indian military aircraft.
The Aérospatiale Alouette III is a single-engine, light utility helicopter developed by French aircraft company Sud Aviation. During its production life, it proved to be a relatively popular rotorcraft; including multiple licensed manufacturers, more than 2,000 units were built.
The Eurocopter, later Airbus HelicoptersAS565 Panther is the military version of the Eurocopter AS365 Dauphin medium-weight multi-purpose twin-engine helicopter. The Panther is used for a wide range of military roles, including combat assault, fire support, anti-submarine warfare, anti-surface warfare, search and rescue, and medical evacuation.
The Kamov Ka-22 Vintokryl was a rotorcraft developed by Kamov for the Soviet Air Force. The experimental transport aircraft combined the capabilities of a helicopter for vertical take-off and landing with those of a fixed-wing aircraft for cruise. The Ka-22 carried a large payload, having a hold comparable in size to the Antonov An-12. Eight world records for altitude and speed were set by the Ka-22 in its class, none of which have since been broken.
The HAL Dhruv is a utility helicopter designed and developed by Hindustan Aeronautics Limited (HAL) in November 1984. The helicopter first flew in 1992; its development was prolonged due to multiple factors including the Indian Army's requirement for design changes, budget restrictions, and sanctions placed on India following the 1998 Pokhran-II nuclear tests. The name comes from a Sanskrit origin word dhruv which means unshakeable or firm.
The Mil V-12, given the project number Izdeliye 65, is a prototype helicopter designed in the Soviet Union and the largest helicopter ever built. The designation "Mi-12" would have been the designation for the production helicopter and did not apply to V-12 prototypes.
The Aérospatiale SA 315B Lama is a French single-engined helicopter. It combines the lighter Aérospatiale Alouette II airframe with Alouette III components and powerplant. The Lama possesses exceptional high altitude performance.
The Advanced Medium Combat Aircraft (AMCA) is an Indian single-seat, twin-engine, all-weather fifth-generation stealth, multirole combat aircraft being developed for the Indian Air Force and the Indian Navy. The Mark-1 variant of the aircraft will be a fifth generation fighter while the Mark-2 variant will have sixth-generation technologies. The aircraft is designed by the Aeronautical Development Agency (ADA) - an aircraft design agency under MoD. A Special Purpose Vehicle (SPV) consisting of ADA, Hindustan Aeronautics Limited (HAL) and a private company is being formed for the development and production of AMCA. In March 2024, the project received approval from India's Cabinet Committee on Security for the prototype development and mass production expected to begin by 2035.
The HAL Prachand is an Indian multi-role light attack helicopter designed and manufactured by Hindustan Aeronautics Limited (HAL) under Project Light Combat Helicopter (LCH). It has been ordered by the Indian Air Force (IAF) and the Indian Army's Aviation Corps (AAC). On 3 October 2022, the LCH was formally inducted into the IAF and was officially named "Prachand".
The AgustaWestland AW119 Koala, produced by Leonardo since 2016, is an eight-seat utility helicopter powered by a single turboshaft engine produced for the civil market. Introduced as the Agusta A119 Koala prior to the Agusta-Westland merger, it is targeted at operators favoring lower running costs of a single-engine aircraft over the redundancy of a twin.
The Boeing Vertol XCH-62 was a triple-turbine, heavy-lift helicopter project designed for the United States Army by Boeing Vertol. Approved in 1971, one prototype reached 95% completion before it was canceled in 1975. The prototype was scrapped in 2005.
The HAL Light Utility Helicopter (LUH), along with its derivative, Light Observation Helicopter (LOH), was designed and developed by the Rotary Wing Research and Design Center (RWR&DC), one of the R&D sections of Hindustan Aeronautics Limited (HAL), for civilian and military applications. These are intended to replace license-built versions of Aérospatiale SA 315B Lama (designated Cheetah) and Aérospatiale Alouette III (designated Chetak) in service with the Indian Army and the Indian Air Force.
The Indian Air Force has been undergoing a modernization program to replace and upgrade outdated equipment since the late 1990s to meet modern standards. For that reason, it has started procuring and developing aircraft, weapons, associated technologies, and infrastructures. Some of these programs date back to the late 1980s. The primary focus of current modernization and upgrades is to replace aircraft purchased from the Soviet Union that currently form the backbone of the air force.
Future Vertical Lift (FVL) is a plan to develop a family of military helicopters for the United States Armed Forces. Five different sizes of aircraft are to be developed, sharing common hardware such as sensors, avionics, engines, and countermeasures. The U.S. Army has been considering the program since 2004. FVL is meant to develop replacements for the Army's UH-60 Black Hawk, AH-64 Apache, CH-47 Chinook, and OH-58 Kiowa helicopters. The precursor for FVL is the Joint Multi-Role (JMR) helicopter program.
The HAL Rudra also known as ALH-WSI, is an armed version of the HAL Dhruv utility helicopter which is designed and produced by the Indian aerospace manufacturer Hindustan Aeronautics Limited (HAL).
HAL RUAV-200 is an unmanned rotorcraft project being developed by Hindustan Aeronautics Limited for the Indian Army and the Indian Navy.
The Kopter AW09, rebranred in Leonardo AW09, is the Leonardo small civil helicopter division's five-to-eight seat, single-engine multirole helicopter which is currently under development at Kopter’s facilities. It is a clean-sheet design amongst a market sector dominated by decades-old airframe designs.
The Airbus Helicopters H160 is a medium utility helicopter developed by Airbus Helicopters. Formally launched at Heli-Expo in Orlando, Florida on 3 March 2015, it is intended to replace the AS365 and EC155 models in the firm's lineup. In June 2015, the first test flight took place. It received its EASA type certification in July 2020, and first deliveries were in December 2021.
The TAI T625 Gökbey is a twin-engined light transport/utility helicopter developed by Turkish Aerospace Industries. Turkey's Undersecretariat for Defence Industries plans to offer the new platform to the Turkish Armed Forces and cooperating nations.
The KAI LCH is a medium-sized twin-engined civil helicopter manufactured by the South Korean aerospace manufacturer Korea Aerospace Industries (KAI). It is derived from the Eurocopter EC155 and is closely related to the Light Armed Helicopter (LAH), a militarised rotorcraft intended for battlefield operations.