Insecticidal soap

Last updated

Insecticidal soap is used to control many plant insect pests. Soap has been used for more than 200 years as an insect control. [1] Because insecticidal soap works on direct contact with pests via the disruption of cell membranes when the insect is penetrated with fatty acids, the insect's cells leak their contents causing the insect to dehydrate and die. [2] Insecticidal soap is sprayed on plants until the entire plant is saturated because the insecticidal properties of the soap occurs when the solution is wet. [3] Soaps have a low mammalian toxicity [4] [5] and are therefore considered safe to be used around children and pets, and may be used in organic farming.[ citation needed ]

Contents

Composition

Insecticidal soap's active ingredient is most often a potassium salt of fatty acids. [1] Insecticidal soap should be based on long-chain fatty acids (1018 carbon atoms) because shorter-chain fatty acids tend to be damaging for the plant (phytotoxicity). [6] Short (8-carbon) fatty-acid chains occur for example in coconut oil and soaps based thereon.[ citation needed ] "'Green Soap' is a potassium/coconut oil soap .... [that] has also been shown to be effective, as an unlabeled insecticide, in controlling soft-bodied insects including aphids". [3] Recommended concentrations of insecticidal soap are typically in the range 12 percent soap mixed with water. [7] [8] [9] One manufacturer recommends a concentration of 0.06% to 0.25% (pure soap equivalent) for most agricultural applications.; [4] [10] another one [5] recommends concentrations of 0.5 to 1% pure soap equivalent. In the European Union, fatty acid potassium salts are registered and allowed as insecticide [11] at a 2% concentration. [12]

Insecticidal soap is most effective if it is dissolved in soft water, since the fatty acids in soap tend to precipitate in hard water, thereby reducing the effectivity. [6] [4]

Insecticidal soap is sold commercially for aphid control. Labels on these products may not always use the word soap, but they will list "potassium salts of fatty acids" or "potassium laurate" as the active ingredient. Certain types of household soaps (not synthetic detergents, [6] ) are also suitable, but it may be difficult to tell the composition and water content from the label. Potassium-based soaps are typically soft or liquid.

Mechanism of action

The mechanism of action is not exactly understood. [6] Possible mechanisms are: [6] [13]

Affected organisms

Insecticidal soap works best on soft-bodied insects and other arthropods such as [7] [4] aphids, adelgids, mealybugs, spider mites, thrips, jumping plant lice, scale insects, whiteflies, and sawfly larvae. It can also be used for caterpillars and leafhoppers, but these large-bodied insects can be more difficult to control with soaps alone. Many pollinators and predatory insects such as lady beetles, bumblebees, and hoverflies are relatively unaffected. However, soap will kill predatory mites that may help control spider mites. [7] [14] Also, the soft-bodied aphid-eating larvae of lady beetles, lacewing, and hoverflies may be affected negatively. According to one study [14] a single soap application killed about 15% of lacewing and lady-beetle larvae, and about 65% of predatory mites ( Amblyseius andersoni).

Green peach aphids are difficult to control [15] since they reproduce quickly (one adult female can deposit up to four nymphs per day) because they tend to reside under the leaves and in leaf axils ("leaf armpits"), where they may not be wetted by a soap spray. Manufacturers [4] [5] indeed state that their insecticidal soaps are only suitable for controlling green peach aphids if used in combination with another insecticide, whereas the same soaps can control other aphids on their own. Among green peach aphids that are in contact with a 2% soap solution, around 95% of the adults and 98% of nymphs die within 48 hours. [15] At 0.75% concentration, the mortality rates are reduced to 75% and 90%, respectively.

Since 2011, insecticidal soap has also been approved in the United States for use against powdery mildew. [4] [5] In the European pesticide registration, its use as an insecticide is listed for aphids, white fly, and spider mites. [12] It may not be used against algae and moss. [12]

Use

Insecticidal soap solution will only kill pests on contact; it has no residual action against aphids that arrive after it has dried. Therefore, the infested plants must be thoroughly wetted. Repeated applications may be necessary to adequately control high populations of pests.

Soap spray may damage plants, especially at higher concentrations or at temperatures above 32 °C (90 °F). [8] [9] Plant injury may not be apparent until two days after application. Some plant species are particularly sensitive to soap sprays. Highly sensitive plants include: [4] horse chestnut, Japanese maple (Acer), Sorbus aucuparia (mountain ash), cherimoya fruit, Lamprocapnos (bleeding heart), and sweet pea. Other sensitive plants include: [9] [4] Portulaca , some tomato varieties, Crataegus (hawthorn), cherries, plum, Adiantum (maidenhair fern), Euphorbia milii (crown of thorns), Lantana camara , Tropaeolum (nasturtium), Gardenia jasminoides , Lilium longiflorum (Easter lily). Conifers under (drought) stress or with tender new growth are sensitive as well.

Damage may occur as yellow or brown spotting on the leaves, burned tips, or leaf scorch. Plants under drought stress, young transplants, unrooted cuttings and plants with soft young growth tend to be more sensitive. Sensitivity may be tested on a small portion of a plant or plot before a full-scale application.

One manufacturer recommends that applications are done with 7- to 14-day intervals, with a maximum of three applications, [4] as repeated applications may aggravate phytotoxicity. In addition, water conditioning agents can increase phytotoxicity.[ citation needed ]

Thanks to its low mammalian toxicity, application of insecticidal soap is typically allowed up to the day of harvest. [4] [5]

See also

Related Research Articles

<span class="mw-page-title-main">Insecticide</span> Pesticide used against insects

Insecticides are pesticides used to kill insects. They include ovicides and larvicides used against insect eggs and larvae, respectively. Insecticides are used in agriculture, medicine, industry and by consumers. Insecticides are claimed to be a major factor behind the increase in the 20th-century's agricultural productivity. Nearly all insecticides have the potential to significantly alter ecosystems; many are toxic to humans and/or animals; some become concentrated as they spread along the food chain.

<span class="mw-page-title-main">Biological pest control</span> Controlling pests using other organisms

Biological control or biocontrol is a method of controlling pests, whether pest animals such as insects and mites, weeds, or pathogens affecting animals or plants by using other organisms. It relies on predation, parasitism, herbivory, or other natural mechanisms, but typically also involves an active human management role. It can be an important component of integrated pest management (IPM) programs.

<span class="mw-page-title-main">Aphid</span> Superfamily of insects

Aphids are small sap-sucking insects and members of the superfamily Aphidoidea. Common names include greenfly and blackfly, although individuals within a species can vary widely in color. The group includes the fluffy white woolly aphids. A typical life cycle involves flightless females giving live birth to female nymphs—who may also be already pregnant, an adaptation scientists call telescoping generations—without the involvement of males. Maturing rapidly, females breed profusely so that the number of these insects multiplies quickly. Winged females may develop later in the season, allowing the insects to colonize new plants. In temperate regions, a phase of sexual reproduction occurs in the autumn, with the insects often overwintering as eggs.

<span class="mw-page-title-main">Whitefly</span> Family of insects

Whiteflies are Hemipterans that typically feed on the undersides of plant leaves. They comprise the family Aleyrodidae, the only family in the superfamily Aleyrodoidea. More than 1550 species have been described.

Pyrethrum was a genus of several Old World plants now classified as Chrysanthemum or Tanacetum which are cultivated as ornamentals for their showy flower heads. Pyrethrum continues to be used as a common name for plants formerly included in the genus Pyrethrum. Pyrethrum is also the name of a natural insecticide made from the dried flower heads of Chrysanthemum cinerariifolium and Chrysanthemum coccineum. The insecticidal compounds present in these species are pyrethrins.

<span class="mw-page-title-main">Pyrethrin</span> Class of organic chemical compounds with insecticidal properties

The pyrethrins are a class of organic compounds normally derived from Chrysanthemum cinerariifolium that have potent insecticidal activity by targeting the nervous systems of insects. Pyrethrin naturally occurs in chrysanthemum flowers and is often considered an organic insecticide when it is not combined with piperonyl butoxide or other synthetic adjuvants. Their insecticidal and insect-repellent properties have been known and used for thousands of years.

<span class="mw-page-title-main">Bifenthrin</span> Chemical compound

Bifenthrin is a pyrethroid insecticide. It is widely used against ant infestations.

<span class="mw-page-title-main">Imidacloprid</span> Chemical compound

Imidacloprid is a systemic insecticide belonging to a class of chemicals called the neonicotinoids which act on the central nervous system of insects. The chemical works by interfering with the transmission of stimuli in the insect nervous system. Specifically, it causes a blockage of the nicotinergic neuronal pathway. By blocking nicotinic acetylcholine receptors, imidacloprid prevents acetylcholine from transmitting impulses between nerves, resulting in the insect's paralysis and eventual death. It is effective on contact and via stomach action. Because imidacloprid binds much more strongly to insect neuron receptors than to mammal neuron receptors, this insecticide is more toxic to insects than to mammals.

A biopesticide is a biological substance or organism that damages, kills, or repels organisms seen as pests. Biological pest management intervention involves predatory, parasitic, or chemical relationships.

<span class="mw-page-title-main">Sooty mold</span> Name for several species of fungus

Sooty mold is a collective term for different Ascomycete fungi, which includes many genera, commonly Cladosporium and Alternaria. It grows on plants and their fruit, but also environmental objects, like fences, garden furniture, stones, and even cars. The mold benefits from either a sugary exudate produced by the plant or fruit, or honeydew-secreting insects or sap suckers the plant may be infested by.

<span class="mw-page-title-main">Amitraz</span> Chemical compound

Amitraz is a non-systemic acaricide and insecticide and has also been described as a scabicide. It was first synthesized by the Boots Co. in England in 1969. Amitraz has been found to have an insect repellent effect, works as an insecticide and also as a pesticide synergist. Its effectiveness is traced back on alpha-adrenergic agonist activity, interaction with octopamine receptors of the central nervous system and inhibition of monoamine oxidases and prostaglandin synthesis. Therefore, it leads to overexcitation and consequently paralysis and death in insects. Because amitraz is less harmful to mammals, amitraz is among many other purposes best known as insecticide against mite- or tick-infestation of dogs. It is also widely used in the beekeeping industry as a control for the Varroa destructor mite, although there are recent reports of resistance.

White oil is an insecticide spray used for controlling a wide range of insect pests in the garden. The spray works by blocking the breathing pores of insects, causing suffocation and death. It is effective in the control of aphids, scale, mealybug, mites, citrus leaf miner, and smooth skinned caterpillars. "White oil" is also an alternative name for mineral oil.

<span class="mw-page-title-main">Acephate</span> Chemical compound

Acephate is an organophosphate foliar and soil insecticide of moderate persistence with residual systemic activity of about 10–15 days at the recommended use rate. It is used primarily for control of aphids, including resistant species, in vegetables and in horticulture. It also controls leaf miners, caterpillars, sawflies, thrips, and spider mites in the previously stated crops as well as turf, and forestry. By direct application to mounds, it is effective in destroying imported fire ants.

<span class="mw-page-title-main">Pesticide application</span> Delivery of pesticides

Pesticide application refers to the practical way in which pesticides are delivered to their biological targets. Public concern about the use of pesticides has highlighted the need to make this process as efficient as possible, in order to minimise their release into the environment and human exposure. The practice of pest management by the rational application of pesticides is supremely multi-disciplinary, combining many aspects of biology and chemistry with: agronomy, engineering, meteorology, socio-economics and public health, together with newer disciplines such as biotechnology and information science.

<i>Myzus persicae</i> Aphid of peach, potato, other crops

Myzus persicae, known as the green peach aphid, greenfly, or the peach-potato aphid, is a small green aphid belonging to the order Hemiptera. It is the most significant aphid pest of peach trees, causing decreased growth, shrivelling of the leaves and the death of various tissues. It also acts as a vector for the transport of plant viruses such as cucumber mosaic virus (CMV), potato virus Y (PVY) and tobacco etch virus (TEV). Potato virus Y and potato leafroll virus can be passed to members of the nightshade/potato family (Solanaceae), and various mosaic viruses to many other food crops.

Copper pesticides are copper compounds used as bactericides, algaecides, or fungicides. They can kill bacteria, oomycetes and algae, and prevent fungal spores from germinating. Common forms of fixed copper fungicides include copper sulfate, copper sulfate pentahydrate, copper hydroxide, copper oxychloride sulfate, cuprous oxide, and copper octanoate.

This is an index of articles relating to pesticides.

<span class="mw-page-title-main">Sulfotep</span> Chemical compound

Sulfotep (also known as tetraethyldithiopyrophosphate and TEDP) is a pesticide commonly used in greenhouses as a fumigant. The substance is also known as Dithione, Dithiophos, and many other names. Sulfotep has the molecular formula C8H20O5P2S2 and belongs to the organophosphate class of chemicals. It has a cholinergic effect, involving depression of the cholinesterase activity of the peripheral and central nervous system of insects. The transduction of signals is disturbed at the synapses that make use of acetylcholine. Sulfotep is a mobile oil that is pale yellow-colored and smells like garlic. It is primarily used as an insecticide.

<span class="mw-page-title-main">Spirotetramat</span> Chemical compound

Spirotetramat is a keto-enol insecticide developed by Bayer CropScience under the brand names Movento and Ultor.

<span class="mw-page-title-main">Flupyradifurone</span> Chemical compound

Flupyradifurone is an organic heterocyclic compound. It is used as a novel butenolide insecticide. Flupyradifurone shows efficient protection to crops and is much safer for non-target organisms compared to other commercial insecticides. Flupyradifurone was developed by Bayer CropScience under the name Sivanto. Sivanto was launched in 2014 since it obtained its first commercial registration in central America. Insecticide Resistance Action Committee (IRAC) classified Flupyradifurone as 4D subset (butenolide) and it is the first pesticide in the butenolide category. In 2015, it was approved by EU.

References

  1. 1 2 Cranshaw, W.S. (2008). "Insect Control: Soaps and Detergents: Fact Sheet". Colorado State University: Extension. Retrieved 4 December 2019.
  2. Oregon State University, National Pesticide Information Centre (NPIC) (2001). "Potassium Salts of Fatty Acids: General Fact Sheet" (PDF). Retrieved 4 December 2019.
  3. 1 2 Cloyd, Raymond A. (2018). ""Soaps" and Detergents: Should They Be Used on Roses?". American Rose Society. Retrieved 4 December 2019.
  4. 1 2 3 4 5 6 7 8 9 10 Pesticide product label for Super insecticidal soap concentrate. US Environmental protection agency, July 2011.
  5. 1 2 3 4 5 Pesticide product label for M-Pede insecticide miticide fungicide. US Environmental protection agency, July 2011.
  6. 1 2 3 4 5 "Soaps" and Detergents: Should They Be Used on Roses? R.A. Cloyd, American Rose Society (2018).
  7. 1 2 3 Insect Control: Soaps and Detergents. W.S. Cranshaw, University of Colorado. March 2008.
  8. 1 2 Aphids: Integrated Pest Management for Home Gardeners and Landscape Professionals. M.L. Flint, University of California Davis, July 2013.
  9. 1 2 3 Insecticidal Soaps for Garden Pest Control. J. D. Ubl, Clemson University, July 2009.
  10. According to the Super insecticidal soap concentrate label above: 0.5 pint of a 25% concentrate per 25 gallons = 0.06%.
  11. Fatty acids C7 to C20 Archived 2015-04-19 at the Wayback Machine . EU-database voor pesticides.
  12. 1 2 3 Review report for the active substance Fatty Acids C7 to C20 Archived 2015-04-19 at the Wayback Machine . Europese Commissie (2013).
  13. Insecticidal Soaps - Modes of Action (video). L.L. Keeley (20 Aug 2013).
  14. 1 2 Toxicity of biopesticides to green apple aphid, predatory insects and mite in an apple-tree orchard. L. Raudonis et al., Zemdirbyste-Agriculture, vol. 97, No. 1 (2010), p. 49–54.
  15. 1 2 Toxicity effects of an insecticidal soap on the green peach aphid Archived 2015-04-02 at the Wayback Machine . E. Tremblay et al., Phytoprotection 90: 35-39 (2009).