Panzerkampfwagen II Ausf. L "Luchs" Panzerspähwagen II/Sd.Kfz. 123/VK 13.03 | |
---|---|
Type | Light tank |
Place of origin | Nazi Germany |
Service history | |
In service | 1942–1945 |
Wars | World War II |
Production history | |
Designer | Daimler-Benz and MAN |
Designed | 1939–1942 |
Manufacturer | Daimler-Benz and MAN |
Produced | September 1942 – January 1944 |
No. built | 100 |
Variants | See Variants |
Specifications | |
Mass | 11.8 t (11.6 long tons) |
Length | 4.63 m (15 ft 2 in) |
Width | 2.48 m (8 ft 2 in) |
Height | 2.21 m (7 ft 3 in) |
Crew | 4 (commander/gunner, driver, loader and radio operator) |
Armor | See Armor layout section |
Main armament | 1 × 2 cm KwK 38 L/65 |
Secondary armament | 1 × 7.92 mm MG 34 machine gun |
Engine | Maybach HL 66P 6-cylinder petrol 180 metric horsepower (178 hp) |
Transmission | Aphon SSG48 (6-1) |
Suspension | torsion bar |
Fuel capacity | 235 L |
Operational range | 260 km (on road) |
Maximum speed | 60 km/h |
The Panzerkampfwagen II Ausf. L "Luchs" (German for lynx) is a German light tank from the Second World War, developed between 1940 and 1942 by Daimler-Benz and MAN. The Luchs was the only Panzer II design with the Schachtellaufwerk overlapping/interleaved road wheels and "slack track" configuration to enter series production, with 100 being built from September 1943 to January 1944 in addition to the conversion of the four Ausf. M tanks. Originally given the experimental designation VK 13.03, it was adopted under the alternate name Panzerspähwagen II and given the popular name Luchs. The Luchs was larger than the Panzer II Ausf. G in most dimensions. With a six speed transmission (plus reverse), it could reach a speed of 60 km/h (37 mph) with a range of 260 km (160 mi). The FuG 12 and FuG Spr radios were installed, while 330 rounds of 20 mm and 2,250 rounds of 7.92 mm ammunition were carried. [1]
In the summer of 1938, German manufacturing firms Daimler-Benz and MAN began developing a new reconnaissance tank under the VK 9.01 index. This tank was positioned as a development of Panzer II, but in fact it was a brand new machine. The chassis with the overlapping wheel arrangement of the support links consisted of five links on both sides. The tank was powered by a 150 hp Maybach HL 45 engine that allowed the 10.5-ton tank to reach a top speed of 50 km/h. In 1939, a prototype was produced, and after testing it was adopted under the name Panzerkampfwagen II Ausf. G. From April 1941 to February 1942, 12 machines were manufactured, after which production was halted. [2]
On April 15, 1939, Daimler-Benz and MAN were ordered to design a 13-ton reconnaissance tank designated VK 13.01. The design of the tank was based on the VK 9.01. [3] The main difference was the turret of the VK 13.01 fits two people on turret. However, in July 1940, the Waffenamt connected the Czech firms Škoda and Böhmisch-Mährische Maschinenfabrik (BMM) to the program of the creation of a 13-ton reconnaissance tank. [4] In July 1941, MAN manufactured the tank chassis. At the end of January 1942, testing of prototypes began at the Kummersdorf test site. The Škoda company developed a T-15 light tank based on LT vz.35, and BMM, with their Panzer 38(t) n.A., developed on the basis of Panzer 38(t). As a result of the first stage of the tests, the BMM project won. However, in the second phase of the trials, which took place between May and June 1942, the MAN project won. [5] The tank was adopted by the Wehrmacht under the name Panzerkampfwagen II Ausf. L. [6]
The box-shaped welded hull was divided into three compartments (control, combat and engine). In the front of the hull there was a mechanic-driver and a radio operator. The front armor was 30mm of steel. The sides of the hull was 20 mm, the rear was also 20 mm. The roof and bottom of the hull had only 10 mm of armor. The tank's weight was 11.8 tons. [1]
The Luchs has 30 mm of armor at the front (sloped between 10-25°), sides is 20 mm, rear is 20 mm, top is 13 mm, and bottom of the tank is 10 mm.
In some tank divisions, the frontal armor of the tank was reinforced with additional 20-mm armor plates. A similar reinforcement was carried out in the 4th reconnaissance battalion of the 4th Panzer Division. [6]
The armament was one 2 cm KwK 38 L/55 autocannon and one 7.92mm MG 34 machine gun. On board were 320 rounds of 20 mm ammunition and 2,250 rounds of machine gun ammunition. [7] To launch smoke grenades on the sides of the turret were installed three Nebelwurfgerät 39 smoke generators with a caliber of 90 mm. Even during the design phase, it was clear that the 20 mm gun would significantly limit the capabilities of the tank, so in April 1943 it was decided to start production of tanks with a 5 cm KwK 39 L/60, but the new gun did not fit in the tank turret. To solve this problem, it was decided to develop a new turret which could take the 5 cm gun on it; however, mass production of 5 cm-armed tanks was never started. [1]
Cartridge | Type | Weight | Velocity | Angle | 100 m | 50 0m | 1000 m |
---|---|---|---|---|---|---|---|
Panzergranate | Armor-piercing | 148g | 780 m/s | 30° | 20mm | 14mm | 9mm |
Panzergranate 40 | Sub-caliber | 100g | 1050 m/s | 30° | 40mm | 20mm | - |
The tank accommodated four crew members, the commander (gunner), driver, loader and the radio operator. [1]
The tank was fitted with a Maybach HL 66P six-cylinder four-stroke in-line liquid cooling engine with a power of 180 hp. The engine starter is the Bosch GTLN 600/12-12000 A-4. A manual launch was also possible. The fuel is ethylated petrol with an octane number 76 was placed in two tanks with a total capacity of 235 liters. The carburetor used in this vehicle was the Solex 40 JFF II. (One Luchs production tank was equipped with a 12-cylinder V-shaped Tatra 103 diesel with power input of 220 hp). [10]
The transmission consisted of a two-disc main dry friction clutch of the Fichtel and Sachs Mecano type, a mechanical synchronized transmission of the Aphon SSG48 (6-1), a gimbal shaft and MAN-type pad brakes. [10]
For each side, the Luchs' chassis consisted of five cropped support links, with a wheel diameter of 735 mm, located in two rows. It uses Schachtellaufwerk overlapping/interleaved road wheels and "slack track" configuration. Torsion bar is the primary suspension for the Luchs.
Maschinenfabrik Augsburg-Nürnberg's original order consisted of 800 tanks, of which 700 were to be produced as Luchs 5 cm. Serial production began in September 1943 and continued until February 1944.
Only 100 Panzer II “Luchs” were produced in total, all manufactured by MAN. A total of only 100 (2 cm) vehicles were produced (serial No. 200101–200200) but not a single tank with a 50 mm gun was produced. The MAN company was not able to fulfill the order completely as it was producing the Panther tank. [11]
The Luchs were to enter service with armoured reconnaissance detachments (Panzer-Aufklarung-Abteilung) [12] which were made up of four platoons of seven Luchs and one in the company HQ. There were also four Sd.Kfz. 250/1 light half-track armoured personnel carriers, one Sd.Kfz. 9 heavy half-track and seven Sd.Kfz.2 Kettenkrad half-track motorcycles. The Luchs' troops began to enter in the autumn of 1942. The first new tanks were received by the 2nd Company of the 4th Reconnaissance Battalion ( 2.Kompanie/Pz.Afkl.Abt.4) of the 4th Panzer Division. On September 26, 1943, the company was disbanded, and the remaining tanks were sent to the factory for repairs. Not all tanks returned from it; some were left off. Later, the company was re-created as the 1st Company of the 9th Reconnaissance Battalion (1.Kompanie./Pz.Afkl.Abt.9) of the 9th Panzer Division. It reached combat readiness by March 1944. This time it consisted of 25 tanks - one HQ and six in each of the four platoons. These tanks did not reach the Eastern Front; first combat use was in France in June 1944. The remaining assembled tanks were either later transferred to the specified units for additional recruitment or distributed piece by piece to other units.
One of the few operations in which the Luchs took part on a massive scale[ citation needed ] was the Operation Citadel. In its course, by August 17, 1943, only 5 tanks remained in an operational state in the 2nd tank reconnaissance company. By September 1, out of 29 vehicles, 10 remained in the company in one form or another. In these formations the Luchs were used until the end of World War II. [13]
Of the original 100 Panzer II Luchs, there are only 2 surviving today. These are:
The Panzer II is the common name used for a family of German tanks used in World War II. The official German designation was Panzerkampfwagen II.
The Panzerkampfwagen III , commonly known as the Panzer III, was a medium tank developed in the 1930s by Germany, and was used extensively in World War II. The official German ordnance designation was Sd.Kfz. 141. It was intended to fight other armoured fighting vehicles and serve alongside and support the similar Panzer IV, which was originally designed for infantry support.
The Panzerkampfwagen IV, commonly known as the Panzer IV, is a German medium tank developed in the late 1930s and used extensively during the Second World War. Its ordnance inventory designation was Sd.Kfz. 161.
This article lists production figures for German armored fighting vehicles during the World War II era. Vehicles include tanks, self-propelled artillery, assault guns and tank destroyers.
The Panzerkampfwagen 38(t), originally known as the ČKD LT vz. 38, was a tank designed during the 1930s, which saw extensive service during World War II. Developed in Czechoslovakia by Českomoravská Kolben-Daněk (ČKD), the type was adopted by Nazi Germany following the annexation of Czechoslovakia. With the German Army and other Axis forces, the type saw service in the invasions of Poland, France and the USSR. Production ended in 1942, when its main armament was deemed inadequate. In all, over 1,400 Pz. 38(t)s were manufactured. The chassis of the Pz. 38(t) continued to be produced for the Marder III (1942–1944) with some of its components used in the later Jagdpanzer 38 (1944–1945) tank destroyer and its derivative vehicles.
Panzerkampfwagen VIII Maus is a German World War II super-heavy tank completed in July of 1944. It is the heaviest fully enclosed armored fighting vehicle ever built. Five were ordered, but only two hulls and one turret were completed, the turret being attached before the testing grounds were captured by advancing Soviet military forces.
The Panther tank, officially Panzerkampfwagen V Panther with ordnance inventory designation: Sd.Kfz. 171, is a German medium tank of World War II. It was used in most European theatres of World War II from mid-1943 to the end of the war in May 1945.
Marder III was the name for a series of World War II German tank destroyers. They mounted either the modified ex-Soviet 76.2 mm F-22 Model 1936 divisional field gun, or the German 7.5 cm PaK 40, in an open-topped fighting compartment on top of the chassis of the Czechoslovakian Panzer 38(t). They offered little protection to the crew, but added significant firepower, which was able to destroy the thick-armored T-34s, compared to contemporary German tanks. They were in production from 1942 to 1944 with three variants, the Marder III, Marder III H, and Marder III M, and served on all fronts until the end of the war, along with the similar Marder II. The German word Marder means "marten" in English.
The Sd.Kfz. 124 Wespe, also known as Leichte Feldhaubitze 18/2 auf Fahrgestell Panzerkampfwagen II (Sf.), is a German self-propelled gun developed and used during the Second World War. It was based on a modified Panzer II chassis.
The 15 cm sIG 33 (Sf) auf Panzerkampfwagen 38(t), also known as Grille was a series of self-propelled artillery vehicles used by Nazi Germany during World War II. The Grille series was based on the Czech Panzer 38(t) tank chassis and used a 15 cm sIG 33 infantry gun.
The 5 cm KwK 38 L/42(5 cm Kampfwagenkanone 38 L/42) was a German 50 mm calibre cannon used as the main armament of variants of the German Panzer III medium tank during the Second World War. The towed anti-tank gun equivalent was the PaK.37 of which 2,600 were produced from 1937 until 1940.
The Panzerkampfwagen I was a light tank produced in Germany in the 1930s. The Panzer I was built in several variants and was the basis for a number of variants listed below.
The Sd.Kfz. 234, was a family of armoured cars designed and built in Germany during World War II. The vehicles were lightly armoured, armed with a 20, 50 or 75 mm main gun, and powered by a Tatra V12 diesel engine. The Sd.Kfz. 234 broadly resembles the appearance of Sd.Kfz. 231 .
The kleiner Panzerbefehlswagen, known also by its ordnance inventory designation Sd.Kfz. 265, was the German Army's first purpose-designed armoured command vehicle; a type of armoured fighting vehicle designed to provide a tank unit commander with mobility and communications on the battlefield. A development of the Army's first mass-produced tank, the Panzer I Ausf. A, the Sd.Kfz. 265 saw considerable action during the early years of the war, serving in Panzer units through 1942 and with other formations until late in the war.
The VK 16.02 Leopard was a planned German light reconnaissance vehicle designed from mid-1941 through to January 1943, with serial production scheduled for April 1943. It was intended to be the replacement of Panzer II Ausf. L "Luchs". The project was canceled in January 1943 before the first prototype was completed as it did not meet the requirements for 1944. A wooden mock up of the Waffenträger variant was produced.
The Panzerkampfwagen I Ausf. F, also known as VK 18.01, was a German light tank from World War II. Despite the fact that it was designated as a modification of the Panzer I light tank, the VK 18.01 was a completely new vehicle that almost nothing to do with other Panzer I variants. The Pz.Kpfw.I Ausf.F was created in 1942 as a light tank designed to storm fortified lines. In that same year, 30 units were produced. From 1943 it was used for anti-guerrilla operations on the Eastern Front and in Yugoslavia. Thirty Panzer I Ausf. F tanks were built between April and December 1942, eight of which were sent to the Eastern Front for evaluation.
The Panzerkampfwagen I Ausf. C, also known by its prototype name VK 6.01, was a German light tank from the Second World War. Although the Panzer I Ausf. C was formally designated as a modification of the Panzer I, it was actually a completely new vehicle. This variant has little similarity with earlier Ausf. A and B variants - one of the main distinctions being the use of the Schachtellaufwerk inter-leaved track wheels which was used in many later German tanks during the war.