M1C helmet

Last updated
M1C Helmet M1chelmet.jpg
M1C Helmet

The M1C helmet was a variant of the U.S. Army's popular and iconic M1 helmet. Developed in World War II to replace the earlier M2 helmet, it was not made available until issued to paratroopers in January 1945. [1] It was different from the M2 in various ways, most importantly its bails (chinstrap hinges). The M2 had fixed, spot welded "D" bales so named for their shape, similar to early M1s. It was found that when sat on or dropped, these bails would snap off. The solution was the implementation of the swivel bail, which could move around and so was less susceptible to breaking. [2]

Like the M2, its most visible differences from the standard infantry M1 helmet was the liner. [2] The liner of the M1C, like most paratrooper liners, had a set of "A yokes" or straps fixed to the side of the liner to enable the use of a four-point chinstrap with leather chin cup to give support to the head and neck and prevent adverse movement during jumps. It used a simple but strong and reliable belt loop-type connection to secure the chinstrap to the a-yokes, which could be opened or closed from either side and thus partially removed without tools. This retention system was not significantly different to the M2's, and the normal infantry chinstrap could still be attached to the helmet shell if desired. Often, however, these modified liners could not be manufactured in time for jumps so they were modified by the soldiers themselves.

Another difference of the M1C was the chinstraps (this was seen on the M2). The chinstraps found on the M2 and M1C both had a button snap on the end so as to be fastened to the liner. [3]

Despite the numerous differences between the M1C and the standard M1 helmet, the shell of the M1C is practically identical to standard swivel bail infantry helmets, making a concrete identification of a helmet as an M1C difficult. There's an argument to be made that the important part of an M1C is actually just a liner with the four-point chinstrap that can slip into any M1 helmet.

The M1C would continue in US service after World War II, with a new split-fabric chinstrap introduced between the Korean War and the Vietnam War not dissimilar to the one seen on the later PASGT helmet, but retaining the belt loop-style chinstrap connection. The M1C would remain in service until the adoption of PASGT, though the M1C would remain a fairly uncommon sight after Korea. They do turn up in various non-airborne units in Vietnam photography, however, suggesting that outside of jump-rated units they were treated like any other M1 and that they were perhaps more common than some thought.

Related Research Articles

<span class="mw-page-title-main">M1 Garand</span> American semi-automatic rifle

The M1 Garand or M1 rifle is a semi-automatic rifle that was the service rifle of the U.S. Army during World War II and the Korean War.

<span class="mw-page-title-main">M1 carbine</span> Auto-loading carbine

The M1 carbine is a lightweight semi-automatic carbine that was issued to the U.S. military during World War II, the Korean War, and the Vietnam War. The M1 carbine was produced in several variants and was widely used by paramilitary and police forces around the world after World War II.

<span class="mw-page-title-main">Brodie helmet</span> Metal combat helmet

The Brodie helmet is a steel combat helmet designed and patented in London in 1915 by Latvian inventor John Leopold Brodie. A modified form of it became the Helmet, Steel, Mark I in Britain and the M1917 Helmet in the US. Colloquially, it was called the shrapnel helmet, battle bowler, Tommy helmet, tin hat, and in the United States the doughboy helmet. It was also known as the dishpan hat, tin pan hat, washbasin and Kelly helmet. The German Army called it the Salatschüssel. The term Brodie is often misused. It is correctly applied only to the original 1915 Brodie's Steel Helmet, War Office Pattern.

<i>Stahlhelm</i> German steel helmet from 1916 to 1992

The Stahlhelm is a German military steel combat helmet intended to provide protection against shrapnels and fragments or shards of grenades. The term Stahlhelm refers both to a generic steel helmet and more specifically to the distinctive German military design.

<span class="mw-page-title-main">Personnel Armor System for Ground Troops</span> Military equipment

Personnel Armor System for Ground Troops is a combat helmet and ballistic vest that was used by the United States military from the early 1980s until the mid-2000s, when the helmet and vest were succeeded by the Lightweight Helmet (LWH), Modular Integrated Communications Helmet (MICH), and Interceptor Body Armor (IBA) respectively.

<span class="mw-page-title-main">M1 helmet</span> Combat helmet

The M1 helmet is a combat helmet that was used by the U.S. military from World War II until 1985, when it was succeeded by the PASGT helmet. The M1 helmet has become an icon of the US military, with its design inspiring other militaries around the world.

<span class="mw-page-title-main">.30 Carbine</span> Light rifle cartridge for M1 Carbine

The .30 Carbine (7.62×33mm) is a rimless carbine/rifle cartridge used in the M1 carbine introduced in the 1940s. It is a light rifle round designed to be fired from the M1 carbine's 18-inch (458 mm) barrel.

<span class="mw-page-title-main">Modular Integrated Communications Helmet</span> Type of U.S. combat helmet

The Modular Integrated Communications Helmet (MICH) is a U.S. combat helmet and one of several used by the U.S. military. It was developed by the United States Army Soldier Systems Center to be the next generation of protective combat helmets for use by the U.S. Army.

<span class="mw-page-title-main">U.S. Army M1943 uniform</span>

The U.S. Army's M1943 uniform was a combat uniform manufactured in windproof cotton sateen cloth introduced in 1943 to replace a variety of other specialist uniforms and some inadequate garments, like the M1941 Field Jacket. It was used through the remainder of World War II and into the Korean War with modifications before being replaced by the OG-107 uniform beginning in 1952.

<span class="mw-page-title-main">SPECTRA helmet</span> French military helmet

The SPECTRA helmet or CGF Gallet Combat Helmet is the PASGT-style ballistic helmet in use with the French military, and the armies of several other countries. Built by CGF Gallet, it weighs 1.4 kg (3.1 lb), is available in three sizes, and is made from ultra-high-molecular-weight polyethylene Spectra fibers, produced under license from Honeywell.

<span class="mw-page-title-main">Lightweight Helmet</span> Armored helmet used by the U.S. Marine Corps and U.S. Navy

The Lightweight Helmet (LWH), also known as the Lightweight Marine Corps Helmet or Lightweight Marine Helmet, is an armored helmet that is used by the United States Marine Corps and U.S. Navy. It is the U.S. Marine Corps' replacement for the PASGT combat helmet and is derived from the Modular Integrated Communications Helmet.

<span class="mw-page-title-main">Mk III helmet</span> Military combat helmet

The Mk III Helmet is a steel military combat helmet that was first developed for the British Army in 1941 by the Medical Research Council. They were issued to troops in April 1944 and then worn in combat for the first time by British and Canadian troops on D-Day. Mk III and Mk IV helmets were used alongside the Brodie helmet for the remainder of the Second World War. It is sometimes referred to as the "turtle" helmet by collectors, because of its vague resemblance to a turtle shell, as well as the 1944 pattern helmet.

<span class="mw-page-title-main">M1 Combat Car</span> Light tank

Error: no inner hatnotes detected (help).

<span class="mw-page-title-main">Zuckerman helmet</span>

The Zuckerman helmet, officially designated the Civilian Protective Helmet, was a British helmet designed for use by civil defence organisations and the general public during World War II. It was researched and designed by Solly Zuckerman, Derman Christopherson and Hugh Cairns.

<span class="mw-page-title-main">Uniforms of the New Zealand Army</span>

The New Zealand Army uniform has changed over the years from that of the original Armed Constabulary of the 1800s to the modern Army Combat Uniform style in use by the majority of world armies today. While British Army influence has always been strong, distinctive New Zealand features have gradually developed. From 2013 the New Zealand Army uniform underwent a complete redesign with a new and distinctive camouflage pattern unique to the NZDF.

The OR-201, also designated Kasda OR-201 Model 76 or M-76 for short, is a combat helmet of Israeli origin. Developed in the 1970s, the OR-201 was one of the world's first ballistic helmets. It was subsequently exported on a large scale and has been used by many militaries worldwide.

The M33 Helmet is a steel combat helmet designed in the 1930s in Italy, and was the standard combat helmet of the Regio Esercito up to World War II, and of the Esercito Italiano well into the Cold War.

<span class="mw-page-title-main">M1937 helmet (Sweden)</span>

The m/37 helmet is a military steel combat helmet used by Swedish armed forces. Replacing the m/21 helmet, the m/37 would be modernized in 1965 with an updated liner and see use into the 1990s with its replacement by the M1990 Kevlar helmet. Three main variants existed. The first had a three pad liner system, like the m/21 and m/26 before it. The third, most common versions of the modified helmets had the same liner as the pictures but with a canvas chinstrap with a quick-release system. The helmet could be gray, as it always was during the second world war, or painted green as it often, but not always, was during the cold war.

The SSh-39 and SSh-40 were two similar designs of steel combat helmet designed and used by the Soviet Union's Red Army. They were the main forms of helmet in use during World War II and had only superficial differences.

References

  1. Jacob (2015-04-04). "Geronimo's helmet, a short history of the U.S. M2". Alexander and Sons German Helmet Restoration. Retrieved 2021-07-19.
  2. 1 2 Sales, Top Pots-WWII US M.-1 Helmets, Liners and Reproduction Uniform. "HOW TO IDENTIFY US WWII M-1 INFANTRY & M-1C PARATROOPER HELMETS". Top Pots - WWII US M-1 Helmets, Liners and Reproduction Uniform Sales. Retrieved 2021-07-19.{{cite web}}: CS1 maint: multiple names: authors list (link) CS1 maint: numeric names: authors list (link)
  3. "U.S. M1C Paratroop Helmet with Pathfinder Insignia #44 – Battlefield Museum" . Retrieved 2021-07-19.