Advanced Combat Helmet | |
---|---|
Type | Combat helmet |
Place of origin | United States of America |
Service history | |
In service | 2003-present |
Used by | See Users |
Wars | In U.S service: Global War on Terrorism In non-US service: Mexican drug war |
Production history | |
Designer | U.S. Army Soldier Systems Center |
Manufacturer | ArmorSource Gentex MKU [1] |
Variants | Generation II Lightweight Advanced Combat Helmet |
The Advanced Combat Helmet (ACH) is the United States Army's current combat helmet, used since the early 2000s. It was developed by the United States Army Soldier Systems Center, [2] the U.S. Army Special Operations Command, [3] and the U.S. Army Research Laboratory [4] to be the next generation of protective combat helmets for use by the American ground forces. The ACH is derived from the Modular Integrated Communications Helmet. [5]
The ACH is currently in the process of being phased out and replaced by the Enhanced Combat Helmet (ECH), an improvement upon the ACH derived from its design; however, both the ACH and the newer ECH are being replaced by the Integrated Head Protection System.
The Advanced Combat Helmet was first fielded beginning in 2003 [N 1] in limited numbers to eventually replace the PASGT helmet. [6] In 2006, 102,000 helmets were ordered from ArmorSource, of which 99,000 were delivered when the contract was fulfilled and properly closed. In 2007, the Army introduced a ballistic "nape pad" that attaches to the ACH's rear suspension system. Of these, 430,000 were to be issued in the Rapid Fielding Initiative (RFI). [6] Beginning in 2008, the Army's Program Executive Office Soldier outfitted soldiers of the 101st Airborne Division and 4th Infantry Division bound for Iraq with helmet-mounted sensors designed to gather data on head injuries (or traumatic brain injuries) caused during IED detonations. The data collected will help with the design of improvements to the ACH's suspension and chin strap systems. [7] In May 2009, 55,000 of these were in storage and 44,000 were in use by U.S. Army, Navy, and Air Force personnel. The 44,000 helmets in use by service members were recalled by the U.S. Army in May 2010 due to potentially defective materials being used. [8] Eventually, the contractor agreed to pay a $3 million fine, without admitting to any wrongdoing by the contractor. [9]
In May 2009, 34,218 ACHs made by the Gentex Corporation were recalled. Certain screws attaching the chinstrap and other parts to the helmet did not conform to specifications in the contract. The screws failed ballistics tests at extreme temperatures. Gentex alleges its subcontractor had fabricated compliance certificates for the screws.[ citation needed ] An OCP cover for the Advanced Combat Helmet began fielding in late 2009 for soldiers deployed in Afghanistan. [10]
On March 7, 2016, Armorsource LLC agreed to pay $3 million to settle False Claims Act allegations. [11] Revision was awarded a contract for the ACH II contract. [12] The ACH and Lightweight Helmets will eventually be replaced by the Enhanced Combat Helmet and Integrated Head Protection System.
The shape of the ACH is virtually identical to the MICH TC-2000. Compared to the PASGT helmet, the front brow is eliminated to improve upwards visibility and allow easier mounting of night-vision goggle brackets. The side brim has been raised to the point that the entire lower brim of the helmet is "flat" compared to the PASGT which curves upwards at the back. This is to allow greater compatibility with communications headsets and improve hearing when headsets are not used.
The ACH uses ballistic fiber such as kevlar and twaron. [13] In 2007, the Army developed and introduced a ballistic "nape pad" that attaches to the ACH's rear suspension system and coincided with the introduction of the Improved Outer Tactical Vest (IOTV).
The pad reduces soldier deaths from fragmentation wounds to the neck and lower head. [14] [15]
The ACH comes from the factory painted sand tan, grey, black, or forest green. It is often worn with cloth helmet covers in various camouflage patterns including Universal Camouflage Pattern, Operational Camouflage Pattern, and the USAF's ABU pattern. The helmet cover may also have small squares of infrared reflective material on the sides, top, and rear which illuminate when viewed through thermal imaging, allowing for friend or foe identification during combat. The helmet can also be fitted with an elastic band with a pair of glow in the dark "cat eye" patches, similar to those seen on the older PASGT helmet. A pair of Cordura straps can be mounted on the rear of the helmet to aid in the retention of protective goggles. The ACH is also commonly seen with a mounting bracket on the front for night vision devices. These brackets often come in one of two designs; a tan or black "tombstone" shape that attaches to the helmet with a single screw through the center, or a larger tan diamond-shaped mount that attaches with three screws, one at each corner. The ACH can also be fitted with Picatinny rails on the sides of the helmet for mounting flashlights or digital cameras.
The Lightweight Advanced Combat Helmet Generation II (LW-ACH Gen II) weighs one pound less than the original ACH while offering the same ballistic protection. [16] [17]
A helmet is a form of protective gear worn to protect the head. More specifically, a helmet complements the skull in protecting the human brain. Ceremonial or symbolic helmets without protective function are sometimes worn. Soldiers wear combat helmets, often made from Kevlar or other lightweight synthetic fibers.
The Interceptor multi-threat body armor system (IBA) is a bullet-resistant body armor system that was used by the United States Armed Forces during the 2000s, with some limited usage into the mid-2010s. IBA and its design replaced the older standardized fragmentation protective Personnel Armor System for Ground Troops (PASGT) body armor system that was designed in the late 1970s and introduced in the early 1980s.
Personnel Armor System for Ground Troops is a combat helmet and ballistic vest that was used by the United States military from the early 1980s until the early or mid-2000s, when the helmet and vest were succeeded by the Lightweight Helmet (LWH), Modular Integrated Communications Helmet (MICH), and Interceptor body armor (IBA) respectively.
The Army Combat Uniform (ACU) is the current combat uniform worn by the United States Army, U.S. Air Force, U.S. Space Force and some elements of the U.S. Coast Guard. Within the Air Force and Space Force, it is referred to as the OCP Uniform, rather than the Army Combat Uniform.
Body armor, personal armor, armored suit (armoured) or coat of armor, among others, is armor for a person's body: protective clothing or close-fitting hands-free shields designed to absorb or deflect physical attacks. Historically used to protect military personnel, today it is also used by various types of police, private security guards, or bodyguards, and occasionally ordinary citizens. Today there are two main types: regular non-plated body armor for moderate to substantial protection, and hard-plate reinforced body armor for maximum protection, such as used by combatants.
The Modular Integrated Communications Helmet (MICH) is a U.S. combat helmet and one of several used by the U.S. military. It was developed by the United States Army Soldier Systems Center to be the next generation of protective combat helmets for use by the U.S. Army.
The SPECTRA helmet or CGF Gallet Combat Helmet is the PASGT-style ballistic helmet in use with the French military, and the armies of several other countries. Built by CGF Gallet, it weighs 1.4 kg (3.1 lb), is available in three sizes, and is made from ultra-high-molecular-weight polyethylene Spectra fibers, produced under license from Honeywell.
The Lightweight Helmet (LWH), also known as the Lightweight Marine Corps Helmet or Lightweight Marine Helmet, is an armored helmet that is used by the United States Marine Corps and U.S. Navy. It is the U.S. Marine Corps' replacement for the PASGT combat helmet and is derived from the Modular Integrated Communications Helmet.
A combat helmet or battle helmet is a type of helmet designed to serve as a piece of personal armor intended to protect the wearer's head during combat. Modern combat helmets are mainly designed to protect from shrapnel and fragments, offer some protection against small arms, and offer a mounting point for devices such as night-vision goggles and communications equipment.
The U.S. Woodland is a camouflage pattern that was used as the default camouflage pattern issued to the United States Armed Forces from 1981, with the issue of the Battle Dress Uniform, until its replacement in the mid to late 2000s. It is a four color, high contrast disruptive pattern with irregular markings in green, brown, sand and black. It is also known unofficially by its colloquial moniker of "M81" after the Battle Dress Uniform it was first used on, though this term was not officially used by the U.S. military.
The CG634 is the main combat helmet of the Canadian Armed Forces. It was introduced in 1997 and is based on the French Gallet TC-3 helmet. The helmet has protection equal to an NIJ Level 3a rating, being able to stop a shot from a .357 Magnum.
The Enhanced Combat Helmet (ECH) was the standard issue combat helmet of the Australian Defence Force, introduced in 2004 to replace the M91 helmet, an Australian version of the American PASGT helmet, it was replaced by the Team Wendy EXFIL Ballistic helmet from 2015
The Enhanced Combat Helmet (ECH) is a combat helmet designed in conjunction of a joint program of the United States Marine Corps and United States Army to replace the current combat helmets in use by the U.S. Army, Marines, Navy, and Air Force. Although similar in shape of the Advanced Combat Helmet and its predecessor the Modular Integrated Communications Helmet, the ECH is instead constructed using thermoplastics instead of the ballistic fibers used on previous-generation combat helmets.
The New Zealand Army uniform has changed over the years from that of the original Armed Constabulary of the 1800s to the modern Army Combat Uniform style in use by the majority of world armies today. While British Army influence has always been strong, distinctive New Zealand features have gradually developed. From 2013 the New Zealand Army uniform underwent a complete redesign with a new and distinctive camouflage pattern unique to the NZDF.
The GOLFO is a combat helmet of Chilean origin issued to the Chilean Army. The helmet is produced locally by the Chilean private firm Baselli Hermanos Brothers S.A. and was introduced in 2000; Made of kevlar, it is capable of stopping a 9×19mm round at 310m.
The BK-3 is a Croatian Combat helmet produced by Šestan-Busch, and is the standard combat helmet of the Croatian Armed Forces. It is also widely exported to many NATO and Middle Eastern customers.
The Ops-Core Future Assault Shell Technology (FAST) Helmet, also known as the FAST helmet, is an American combat helmet used by special operations forces and law enforcement organizations in various countries, as well as the current standard protective headgear of the Norwegian Armed Forces.
The QGF-03 helmet is a combat helmet deployed by the People's Liberation Army in 2005. The helmet, like its predecessor the QGF-02, is made from a Kevlar composite material and replaces older steel helmets such as the GK80 for frontline troops.
Gear being fielded to Soldiers with the new pattern includes a cover for the Advanced Combat Helmet, the Extended Cold Weather Clothing System, the Fire Resistant Army Combat Uniform, the Improved Outer Tactical Vest, both the sun hat and patrol cap, name and service tapes for the FR ACU, and multiple pieces of modular lightweight load-carrying equipment (MOLLE).
{{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link)