Coppergate Helmet

Last updated

Coppergate Helmet
Coppergate Helmet YORCM CA665-2.png
The Coppergate Helmet
MaterialIron, brass containing 85% copper
Created8th century
Discovered1982
York, North Yorkshire
Present location Yorkshire Museum
Registration YORCM : CA665

The Coppergate Helmet (also known as the York Helmet) is an eighth-century Anglo-Saxon helmet found in York, England. It was discovered in May 1982 during excavations for the Jorvik Viking Centre at the bottom of a pit that is thought to have once been a well.

Contents

The helmet is one of six Anglo-Saxon helmets known to have survived to the present day, and is by far the best preserved. It shares its basic form with the helmet found at Wollaston (1997), joining that find and those at Benty Grange (1848), Sutton Hoo (1939), Shorwell (2004) and Staffordshire (2009), as one of the "crested helmets" that flourished in England and Scandinavia from the sixth through to the eleventh centuries. It is now in the collections of the Yorkshire Museum. [1]

Description

Construction

The construction of the helmet is complex. [2] Apart from the neck guard the basic form is shared by the contemporaneous Pioneer Helmet, a sparsely decorated fighting piece, [3] [4] and consists of four parts: an iron skull cap with brass edging and decorations, two iron cheek guards with brass edging, and camail protecting the neck. [5]

The cap of the helmet has eight iron components. [6] A brow band encircles the head; a nose-to-nape band extends from back to front, where it narrows and continues downwards as the nasal; two lateral bands each connect the side of the brow band to the top of the nose-to-nape band; and four subtriangular infill plates sit underneath the resulting holes. [6] The eight pieces are riveted together. [7] The brow band, 572 mm (22.5 in) long and 74 mm (2.9 in) to 87.4 mm (3.44 in) wide, is not entirely circular; a 69.8 mm (2.75 in) gap at the front is covered by the nose-to-nape band, which overlaps the brow band at the front and underlaps it at the back. [8] Quadrant-shaped cutouts at the front, and rectangular cutouts at the sides, create eye-holes and attachment points for the cheek guard hinges. [9] On the dexter side is a light and unexplained sketch of a rectangle with two lines in the shape of an 'X' connecting the corners. [9] The nose-to-nape band is 492.8 mm (19.40 in) long and about 87.5 mm (3.44 in) wide, and is shaped at the front, possibly with a template before assembly, both to help facilitate the eye-holes and to continue down as the nasal. [10] The two lateral bands, about 125 mm (4.9 in) long and 82 mm (3.2 in) wide, are riveted to the inside of the brow and nose-to-nape bands by three iron rivets on each end. [11] The four infill plates are roughly triangular, but have their corners cut off to avoid overlapping the rivets holding the bands together. [12] Their sizes vary considerably, likely because the edges are hidden from view. [12] At the front the two infill plates are affixed underneath the bands by four rivets on either side and three at the bottom; at the back, five rivets on either side, and three at the bottom, hold each infill plate to the bands. [12]

Four different types of brass edging, comprising seven individual pieces, are used on the cap. [13] A plain binding extends around the front of the helmet, connecting the two cheek guard hinges and covering the edges of the nasal and eye-hole cutouts; a short strip on either side fills the space between the hinge and the end of the eyebrow; behind the hinge on either side, another short piece extends to the end of the cheek guard; and across the back of the helmet, connecting the ends of the cheek guard, runs a mail suspension strip. [14] The plain binding is made from a piece of brass, up to 9.8 mm (0.39 in) wide, that is folded in half around the edge of the helmet. [14] It appears to be made from a single piece of metal, and is attached with six brass rivets. [15] Above these on either side, a strip approximately 19.4 mm (0.76 in) long and 9 mm (0.35 in) tall fills the space between the hinge and the end of the eyebrow, on which side it is moulded to the shape of the eyebrow's terminal animal head. [16] The upper edges are folded over at the top. [17] These strips are each affixed with two brass rivets and are primarily decorative, for they match the height of the two types of edge binding on the back of the helmet. [18] The first of these types is made from one rectangular strip of brass per side, folded over into a U-shape and fitted over the approximately 35.5 mm (1.40 in) long portion of the brow band between the cheek guard hinge and the back of the cheek guard. [19] On the exterior of the helmet the strips are about 11.7 mm (0.46 in) tall, and have the tops folded over, as on the filler strips. [19] Two brass rivets per side hold them in place. [20] The final type of edge binding, the mail suspension strip, is similar to the pieces behind the hinges that it abuts. [20] It is made of folded over rectangular strips of brass, fitted over the edge of the brow band and with the top of the exterior edge itself folded down. [21] Two pieces of equal length were used, abutting at the back of the helmet, although the sinister strip was not found with the helmet. [22] The dexter strip is 162 mm (6.4 in) long and 10.3 mm (0.41 in) tall, and between its bottom and the bottom of the brow band, leaves a hollow 3.3 mm (0.13 in) high gap. [22] Seven or eight slots, each between 1.1 mm (0.043 in) and 1.7 mm (0.067 in) wide, were cut for every 25 mm (0.98 in) of the strip. [22] One ring of mail was placed into each slot, and a piece of iron wire 2.5 mm (0.098 in) in diameter was slotted through to hold them in place. [23] The mail suspension strip was held on by silver rivets with domed heads; only two survive, though five were probably originally used. [22]

Suspended from the cap are two cheek guards and a mail curtain. [5] The cheek guards are made from individual pieces of iron and at their maximum dimensions are approximately 127 mm (5.0 in) long and 88 mm (3.5 in) wide. [24] They are curved inward both laterally and longitudinally, and each held to the brow band by a single hinge. [25] Both hinges are made of two pieces of iron, approximately 50 mm (2.0 in) long and 25 mm (0.98 in) wide, that were bent in half over a circular rod and then cut to create matching slots; the upper dexter piece has four slots and the lower piece three—one of which is broken—a pattern that is reversed on the sinister side. [25] The upper halves fit over sections cut out of the brow band, the lower halves over the cheek guards, and all four pieces are held in place with two iron rivets. [25] The slots mesh together, and are held in place by 2.4 mm (0.094 in) diameter iron pins, the sinister of which is missing and has been replaced. [25]

The mail is remarkable in consisting of forge-welded links, rather than the far more common riveted links. [26] The helmet was found to be made of iron, with applied brass-work containing approximately 85% copper. [27]

Decoration

The nasal of the helmet showing decoration composed of two interlaced beasts Noseguard of Coppergate helmet.jpg
The nasal of the helmet showing decoration composed of two interlaced beasts

The helmet has two low crests of brass, one running from front to back, the other from side to side, forming a cross shape when viewed from above. The brass banding within the crests bears a Latin inscription:

IN NOMINE : DNI : NOSTRI : IHV : SCS : SPS : DI : ET : OMNIBVS : DECEMVS : AMEN: OSHERE : XPI


In the name of our Lord Jesus, the Holy Spirit, and God; and to all we say Amen / Oshere / Christ

An alternative interpretation suggests the following translation:

In the name of our Lord Jesus Christ and of the Spirit of God, let us offer up Oshere to All Saints. Amen. [28]

Oshere is a male Anglian name and XPI are the first three letters of the word Christos Χριστός (khristos) in Greek. [27]

The brass crest terminates in a decorative animal head at the base of the nasal. The brass eyebrow decorations that flank the nasal also terminate in animal heads. The decoration of the nasal consists of two intertwined beasts, whose bodies and limbs degenerate into interlace ornament. [29]

Typology

Like many other helmets of Germanic Western and Northern Europe in the Early Middle Ages the construction of the Coppergate helmet is derivative of Late Roman helmet types. [30]

Discovery

The helmet was discovered on 12 May 1982 during excavations for the Jorvik Viking Centre in York, North Yorkshire. [31] The York Archaeological Trust had previously excavated 1000 m2 in the area from 1976 to 1981, finding evidence of Roman occupation in the area but very little indication of Anglo-Saxon settlement. [32] In 1981 and 1982 an area five times the size of the initial excavation was developed, including for the construction of the Coppergate Shopping Centre and the Jorvik Viking Centre. [31] As most of the land had not been subject to the earlier archaeological excavations, a watching brief was maintained during the construction. [31]

At approximately 2:40 pm an excavator, using a flat scraper bucket to remove the natural clay a few centimetres at a time, struck an object. [31] The foreman stopped work to check on the object's size, thinking it was a stone. [31] His fingers wiped away the dust and exposed the golden band at the top of the helmet, after which he alerted the archaeologists on site. [33] Their investigation showed a wood-lined pit, approximately 1.4m long on each side, and 20 cm (7.9 in) deep; nineteenth-century construction of a factory had removed the upper portion, and had come within a few centimetres of the helmet. [34] Within the remaining portion were found a seemingly random collection of several pieces of wood and twigs, a sword-beater with textile impressions, a churn dasher, a fragment of a crucible, an antler beam, a rubbing stone, a fragment of glass, a fragment of hearth lining, seven fragments of slag, and three fragments of iron. [35] These were removed before the helmet to free up space. [2] The helmet itself had to be removed quickly, both to prevent corrosion caused by its first exposure to air in more than 1,000 years and for reasons of security, and by 8:30 it had been placed atop crumpled paper in a plastic bowl and packed away to spend the night in the "strong room" of the Borthwick Institute of Historical Research at the University of York. [36]

The helmet is easily the best preserved Anglo-Saxon example, [37] although its violent manner of discovery caused it significant damage. The excavator appears to have struck near the top of the rear dexter side, [38] shearing off rivets and taking the rear infill plate to pieces. The front infill plate was itself dislodged, while the lateral band was broken off and folded. This caused with it the crumpling and breaking into three pieces of the lateral inscription band, the rear edge pieces of which were lost entirely; these may have been catapulted across the construction site. The rear dexter portion of the nose-to-nape band was also driven inwards. The shock of the excavator's strike probably also accounts for a missing portion along the rear sinister brow band, which may have corroded before disintegrating with the impact. The suspension strip from which the camail would have hung was also missing in this area, although it may have been removed before the helmet's deposition.[ citation needed ]

Archaeological context

The pit in which the helmet was found was lined with oak planks that had been pressed into the clay. [39] It was most probably a well; the lack of food or human parasite ova remains suggests that it was not a toilet or cesspit, while plant and animal remains are consistent with an open, aquatic environment. [40] The helmet appears to have been intentionally hidden within it, probably with the intention of recovery. [41] The sinister cheek piece and the camail had been carefully removed and placed inside the cap, which was then placed upside down in the pit, keeping the three parts together. [41] At the same time, the random assortment of items also found in the pit does not suggest that the helmet was deposited as a type of offering. [42] The volatile state of York during the eighth and ninth centuries would have given the helmet's owner ample opportunity to consider hiding it in a well. [43] The Vikings invaded York in 866, the Northumbrians, unsuccessfully, a year later. [43] Nor had the preceding century of Northumbrian rule been peaceful; between 758 and 867, every King of Northumbria whose fate is known was either murdered, killed in battle or forced out. [43] Any one of these turbulent periods could have inspired the owner of the helmet to hide it with the unrealised intention of recovering it later. [43]

Conservation

For the five weeks following its discovery, the helmet was placed in an airtight Perspex box with a humid nitrogen atmosphere. [44] [45] This was to solve the seemingly contradictory problems of conserving any remaining organic matter, which would need to be kept moist, and conserving the iron of the helmet, which would normally need to be kept dry to avoid corrosion. [46] [45] The humid nitrogen environment avoided the latter danger by removing the oxygen needed for oxidation to occur. [46] [44] [45] In this state the helmet was held stable; to allow for radiography and other examination it was removed from its container four times, for no more than two hours at a time, at which point some rusting occurred. [47] [45] The scans revealed the presence of the camail and the sinister cheek guard within the cap of the helmet, otherwise filled with clay. [46] [48] In mid-June the interior of the helmet was excavated in 10 mm (0.39 in) intervals, corresponding to the vertical slices taken of the helmet when it was CT scanned. [45] [48] No significant organic materials were found—it had been hoped that an interior leather cap, worn as additional padding, might be present—allowing the helmet to be protected against corrosion more easily, by sealing it in a new Perspex box desiccated with sachets of silica gel. [45] [49]

The helmet next had the accumulated layers of corrosion removed. This was done manually, using brushes and a scalpel, with an eye towards preserving the corrosion which itself retained the original surface texture of the helmet. [50] Micro-abrasive blasting was used on some areas such as the sinister cheek guard, after its broken fragments were adhered together, as the corrosion was too heavy and the surfaces too fragile to press against with the scalpel. [51] Most of the brass fittings needed only cleaning with glass bristle brush, and the interior of the cap was only lightly cleaned, leaving material for possible future analysis. [52] The mail, extremely well preserved despite being a cemented block when removed from the cap of the helmet, was freed by using a scalpel and mounted needle to chip away the corrosion. [53] Open rings were adhered closed, and cotton thread used to connect incomplete rings. [52]

Restoration

Coppergate helmet, dexter profile view Coppergate Helmet YORCM CA665-004.jpg
Coppergate helmet, dexter profile view

Discussions the following year considered sending the helmet away for restoration, and on 21 June 1983 it was sent to the British Museum. [54] The museum's task was largely to undo the damage caused by the excavator by reshaping deformed pieces, reattaching loose fragments, and filling in missing areas. [54] It was also tasked with creating a mount for display. [54] The decision to restore the helmet was controversial. [2] The York Archaeological trust argued that doing so would risk destroying archaeological evidence, but was overruled by the York City Council. [55]

The nose-to-nape band was first reshaped with the use of a jig fastened to the helmet with three clamps, the middle of which was tightened to bend the metal into place. [56] The remaining reshaping was primarily carried out with padded clamps, hammers, and wooden stakes, although small fragments of the dexter lateral band and rear infill place were soldered in place at a high temperature. [57] The reshaped components were held in place using steel bolts; unlike the rivets originally used, the heads of the bolts are slightly raised from the surface of the helmet. [58] The crushed and broken lateral inscription band, meanwhile, was annealed with a natural gas bunsen burner before being reshaped with wood and Perspex levers. [58] The two surviving strips edging the inscription band were manually reshaped, while the missing pieces, which may have been catapulted across the construction site by the excavator, [59] were recreated with brass. [58] The recreated strips did not repeat the engraved chevron pattern of the originals, creating a visible distinction between old and new. [58] In its restored state, the inscription band was placed on the helmet with a cellulose nitrate adhesive. [58] At some point in the process a slight dent in the front portion of the nose-to-nape inscription band was also reshaped, despite the belief that it represented contemporary use of the helmet, not post-deposition damage. [60]

A new suspension strip was created to replace the missing sinister half, and damaged rings had new rings of iron wire adhered to them in support. [61] The camail was then rehung, and attached to three loops on each cheek guard. [62] Replacements were made for several missing loops. [61] Gaps in protection were apparent between the loops, and so a wire was threaded through the loops to pull the rings against the cheek pieces; this was an invention of the laboratory with no evidence of contemporary practice, but is reversible. [5]

The significant gaps in the helmet were filled in with polyester resin paste and fine copper gauze. [58] The gauze was cut to fit the size of the holes and edged with tin solder. [58] It was then held in place either by metal bolts put through the original rivet holes, or by the polyester resin paste. [58] This paste was spread atop the gauze, creating a smooth surface that was then coloured with natural powder pigments and shellac dissolved in industrial methylated spirits to match the original tone of the helmet. [58] Finally, the helmet was cleaned with 15% formic acid, washed with distilled water, dried in hot air, and coated with Renaissance Wax. [5] A Perspex mount was built, containing three silicone rubber buffers on which the helmet rests. [5] The restoration was completed in February 1984. [54]

Public display

The helmet forms part of the permanent collection of the Yorkshire Museum and has been included in many public exhibitions since its discovery.

During the 2009–2010 closure of the Yorkshire Museum for a major refurbishment, the helmet was displayed in the British Museum as part of the exhibition Treasures from Medieval York: England's other capital. [63] When the museum reopened in August 2010 the helmet was displayed in the Medieval gallery in the exhibition Medieval York: The Power and the Glory. [64] From 2012 to 2013 it was displayed in the York 1212: The Making of a City exhibition, celebrating 800 years since York received a Royal charter. [65]

From 8 April to 5 May 2017, the helmet was on display in the Jorvik Viking Centre. [66]

From 2017 the helmet formed part of a touring exhibition titled Viking: Rediscover the Legend and was displayed alongside the Bedale Hoard, the Vale of York hoard and the Cuerdale hoard, with the tour starting at the Yorkshire Museum in May 2017 with subsequent displays at the Atkinson Art Gallery and Library in Southport, Aberdeen Art Gallery, Norwich Castle Museum, and the University of Nottingham. [67] [68]

The helmet went back on display at the Yorkshire Museum in September 2019. [69]

See also

Citations

  1. ↑ "Collections item: York helmet". York Museums Trust . Retrieved 14 February 2018.
  2. 1 2 3 Tweddle 1992, p. 894.
  3. ↑ Meadows 2004, p. 25.
  4. ↑ Read 2006, p. 39.
  5. 1 2 3 4 5 Tweddle 1992, p. 940.
  6. 1 2 Tweddle 1992, p. 946.
  7. ↑ Tweddle 1992, pp. 1036–1040.
  8. ↑ Tweddle 1992, pp. 947–952.
  9. 1 2 Tweddle 1992, p. 947.
  10. ↑ Tweddle 1992, p. 952.
  11. ↑ Tweddle 1992, pp. 954, 1038.
  12. 1 2 3 Tweddle 1992, pp. 958–960.
  13. ↑ Tweddle 1992, pp. 960–965.
  14. 1 2 Tweddle 1992, p. 961.
  15. ↑ Tweddle 1992, pp. 961–962.
  16. ↑ Tweddle 1992, pp. 962–963.
  17. ↑ Tweddle 1992, p. 962.
  18. ↑ Tweddle 1992, p. 963.
  19. 1 2 Tweddle 1992, pp. 963–964.
  20. 1 2 Tweddle 1992, p. 964.
  21. ↑ Tweddle 1992, pp. 964–965.
  22. 1 2 3 4 Tweddle 1992, p. 965.
  23. ↑ Tweddle 1992, pp. 939, 965.
  24. ↑ Tweddle 1992, pp. 940, 989–991.
  25. 1 2 3 4 Tweddle 1992, pp. 989–991.
  26. ↑ Tweddle 1992.
  27. 1 2 SKB 2006.
  28. ↑ Binns, Norton & Palliser 1990.
  29. ↑ Wilson 1984, pp. 67–69.
  30. ↑ James 1986, p. 134.
  31. 1 2 3 4 5 Tweddle 1992, p. 851.
  32. ↑ Tweddle 1992, pp. 851, 855.
  33. ↑ Tweddle 1992, pp. 851–853.
  34. ↑ Tweddle 1992, p. 864.
  35. ↑ Tweddle 1992, pp. 864–865.
  36. ↑ Tweddle 1992, pp. 853, 894.
  37. ↑ Tweddle 1992, p. 853.
  38. ↑ Tweddle 1992, p. 1036.
  39. ↑ Tweddle 1992, pp. 864, 876.
  40. ↑ Tweddle 1992, pp. 879–881.
  41. 1 2 Tweddle 1992, pp. 1165–1166.
  42. ↑ Tweddle 1992, p. 1166.
  43. 1 2 3 4 Tweddle 1992, pp. 1166–1167.
  44. 1 2 Tweddle 1992, pp. 895–896.
  45. 1 2 3 4 5 6 Spriggs 1985, p. 33.
  46. 1 2 3 Tweddle 1984, p. 9.
  47. ↑ Tweddle 1992, pp. 895–896, 922.
  48. 1 2 Tweddle 1992, p. 902.
  49. ↑ Tweddle 1992, pp. 903, 917.
  50. ↑ Tweddle 1992, p. 920.
  51. ↑ Tweddle 1992, pp. 918, 920.
  52. 1 2 Tweddle 1992, p. 929.
  53. ↑ Tweddle 1992, pp. 929, 932–935.
  54. 1 2 3 4 Tweddle 1992, p. 936.
  55. ↑ Corfield 1988, pp. 263–264.
  56. ↑ Tweddle 1992, pp. 936–937.
  57. ↑ Tweddle 1992, pp. 937–938.
  58. 1 2 3 4 5 6 7 8 9 Tweddle 1992, p. 938.
  59. ↑ Tweddle 1992, p. 911.
  60. ↑ Tweddle 1992, pp. 1032–1033.
  61. 1 2 Tweddle 1992, p. 939.
  62. ↑ Tweddle 1992, pp. 939–940.
  63. ↑ "Treasures from Medieval York: England's other capital". British Museum. 2017. Retrieved 19 February 2018.
  64. ↑ "News: Yorkshire Museum Reopens". Museyon. Retrieved 19 February 2018.
  65. ↑ Hazard, R. (10 April 2012). "Yorkshire Museum celebrates 800 years since Royal Charter with The Making of the City". Culture24. Retrieved 19 February 2018.
  66. ↑ "York Helmet Returns to Coppergate". Minster FM News. 11 March 2017. Retrieved 14 February 2018.
  67. ↑ Lewis, Stephen (12 May 2017). "Face to face with the Vikings". The Press . York. Retrieved 24 May 2017.
  68. ↑ "A new understanding of the Vikings". Minster FM News. 18 May 2017. Retrieved 3 July 2017.
  69. ↑ Laycock, Mike (20 September 2019). "800-year-old Christ figure returns to York after two centuries". The Press . York. Retrieved 23 September 2019.

General and cited references

Related Research Articles

<span class="mw-page-title-main">Aventail</span> Flexible curtain of mail attached to the skull of a helmet

An aventail or camail is a flexible curtain of mail attached to the skull of a helmet that extends to cover at least the neck, but often also the throat and shoulders. Part or all of the face, with spaces to allow vision, could also be covered. Some featured a ventail which could be folded over the bottom face and vice versa, much in the same manner as a visor.

<span class="mw-page-title-main">Benty Grange helmet</span> 7th-century boar-crested Anglo-Saxon helmet

The Benty Grange helmet is an Anglo-Saxon boar-crested helmet from the seventh century AD. It was excavated by Thomas Bateman in 1848 from a tumulus at the Benty Grange farm in Monyash in western Derbyshire. The grave had probably been looted by the time of Bateman's excavation, but still contained other high-status objects suggestive of a richly furnished burial, such as the fragmentary remains of a hanging bowl. The helmet is displayed at Sheffield's Weston Park Museum, which purchased it from Bateman's estate in 1893.

<span class="mw-page-title-main">Coolus helmet</span> Type of ancient Celtic and Roman helmet

The Coolus helmet was a type of ancient Celtic and Roman helmet popular in the 1st century BCE. It was typically made in bronze or brass and, like the Montefortino type with which it co-existed, was a descendant of Celtic helmet types. The explanation of the choice to use bronze can be attributed to the type of warfare that the helmet was used for; also the cultural affinities have influence on why the helmet was made the way that it was. Within a long process of evolution, Roman military armor for the head developed from early pre-Roman helmets. Rome itself had no proper tradition of such objects, as most of the soldiers of the Early Republic made use of helmets produced by the Etruscans, whose craftsmen were known for their ability to make vessels.

The Imperial helmet-type was a type of helmet worn by Roman legionaries. Prior to the Empire, Roman Republican soldiers often provided their own equipment, which was passed down from father to son. Thus, a variety of equipment, from different eras was present in the ranks. Even as the professional Imperial army emerged, and short-term service citizen soldiers became rare, useful equipment was never discarded. So when the improved Imperial helmet appeared, it replaced what remained of the very old Coolus type, which was largely superseded at the time by improved versions of the Montefortino helmet type, which continued to serve alongside it for a time. This constituted the final evolutionary stage of the legionary helmet (galea).

<span class="mw-page-title-main">Sutton Hoo helmet</span> Decorated Anglo-Saxon helmet

The Sutton Hoo helmet is a decorated Anglo-Saxon helmet found during a 1939 excavation of the Sutton Hoo ship-burial. It was buried around the years c. 620–625 AD and is widely associated with an Anglo-Saxon leader, King Rædwald of East Anglia; its elaborate decoration may have given it a secondary function akin to a crown. The helmet was both a functional piece of armour and a decorative piece of metalwork. An iconic object from an archaeological find hailed as the "British Tutankhamen", it has become a symbol of the Early Middle Ages, "of Archaeology in general", and of England.

<span class="mw-page-title-main">Pioneer Helmet</span> Anglo-Saxon helmet from the late seventh century found in Wollaston, Northamptonshire

The Pioneer Helmet is an Anglo-Saxon boar-crested helmet from the late seventh century found in Wollaston, Northamptonshire, United Kingdom. It was discovered during a March 1997 excavation before the land was to be mined for gravel and was part of the grave of a young man. Other objects in the grave, such as a hanging bowl and a pattern welded sword, suggest that it was the burial mound of a high-status warrior.

<span class="mw-page-title-main">Nijmegen Helmet</span> Facial iron mask of a Roman horseman

The Nijmegen Helmet is a Roman cavalry sports helmet from the first or second century AD. It was found around 1915 in a gravel bed on the left bank of the Waal river, near the Dutch city of Nijmegen. The helmet would have been worn by the élite Roman cavalry. The head portion of the helmet is made of iron, while the mask and diadem are of bronze or brass. The helmet provides neck protection via a projecting rim overlaid with a thin bronze covering plated with silver. The diadem features two male and three female figures.

<span class="mw-page-title-main">Shorwell helmet</span> Anglo-Saxon helmet from the early to mid-sixth century AD found near Shorwell on the Isle of Wight

The Shorwell helmet is an Anglo-Saxon helmet from the early to mid-sixth century AD found near Shorwell on the Isle of Wight in southern England. It was one of the grave goods of a high-status Anglo-Saxon warrior, and was found with other objects such as a pattern-welded sword and hanging bowl. One of only six known Anglo-Saxon helmets, alongside those found at Benty Grange (1848), Sutton Hoo (1939), Coppergate (1982), Wollaston (1997), and Staffordshire (2009), it is the sole example to derive from the continental Frankish style rather than the contemporaneous Northern "crested helmets" used in England and Scandinavia.

<span class="mw-page-title-main">Gjermundbu helmet</span> Viking Age helmet

The Gjermundbu helmet is a Viking Age helmet.

<span class="mw-page-title-main">Agris Helmet</span> Ceremonial Celtic helmet from c. 350 BC

The Agris Helmet is a ceremonial Celtic helmet from c. 350 BC that was found in a cave near Agris, Charente, France, in 1981. It is a masterpiece of Celtic art, and would probably have been used for display rather than worn in battle. The helmet consists of an iron cap completely covered with bands of bronze. The bronze is in turn covered with unusually pure gold leaf, with embedded coral decorations attached using silver rivets. One of the cheek guards was also found and has similar materials and designs. The helmet is mostly decorated in early Celtic patterns but there are later Celtic motifs and signs of Etruscan or Greek influence. The quality of the gold indicates that the helmet may well have been made locally in the Atlantic region.

Dominic Tweddle,, is an English archaeologist specialising in Anglo-Saxon studies and the director general of the National Museum of the Royal Navy. Previously he spent time as a research assistant at the British Museum and as the assistant director of the York Archaeological Trust, where he helped develop the Jorvik Viking Centre. He is also an honorary professor at the UCL Institute of Archaeology and the University of Portsmouth.

<span class="mw-page-title-main">Tjele helmet fragment</span> Viking Age fragment of a helmet

The Tjele helmet fragment is a Viking Age fragment of iron and bronze, originally comprising the eyebrows and noseguard of a helmet. It was discovered in 1850 with a large assortment of smith's tools in Denmark, and though the find was sent to the National Museum of Denmark, for 134 years the fragment was mistaken for a saddle mount. In 1984 it was properly identified by an assistant keeper at the museum as the remainder of one of only five known helmets from the Viking era.

<span class="mw-page-title-main">Gevninge helmet fragment</span> 6th or 7th century artefact

The Gevninge helmet fragment is the dexter eyepiece of a helmet from the Viking Age or end of the Nordic Iron Age. It was found in 2000 during the excavation of a Viking farmstead in Gevninge, near Lejre, Denmark. The fragment is moulded from bronze and gilded, and consists of a stylised eyebrow with eyelashes above an oval opening. There are three holes at the top and bottom of the fragment to affix the eyepiece to a helmet. The fragment is significant as rare evidence of contemporaneous helmets, and also for its discovery in Gevninge, an outpost that is possibly connected to the Anglo-Saxon epic Beowulf. It has been in the collection of the Lejre Museum since its discovery, and has been exhibited internationally as part of a travelling exhibition on Vikings.

Elisabeth Munksgaard was a Danish historian and from 1962 until retiring in 1990, the assistant Keeper in the Department of the Prehistory of Denmark at the National Museum of Denmark.} She was "Denmark's acknowledged expert" on art from the late Iron Age and Viking Age.

<span class="mw-page-title-main">Witcham Gravel helmet</span> Roman cavalry helmet from the first century CE

The Witcham Gravel helmet is a Roman auxiliary cavalry helmet from the first century AD. Only the decorative copper alloy casing remains; an iron core originally fit under the casing, but has now corroded away. The cap, neck guard, and cheek guards were originally tinned, giving the appearance of a silver helmet encircled by a gold band. The helmet's distinctive feature is the presence of three hollow bosses, out of an original six, that decorate the exterior. No other Roman helmet is known to have such a feature. They may be a decorative embellishment influenced by Etruscan helmets from the sixth century BC, which had similar, lead-filled bosses, that would have deflected blades.

<span class="mw-page-title-main">Lokrume helmet fragment</span> Decorated fragment from a Viking Age helmet

The Lokrume helmet fragment is a decorated eyebrow piece from a Viking Age helmet. It is made of iron, the surface of which is covered with silver and features an interlace pattern in niello or wire. Discovered in Lokrume, a small settlement on the Swedish island of Gotland, the fragment was first described in print in 1907 and is in the collection of the Gotland Museum.

<span class="mw-page-title-main">Lamellar helmet</span>

The lamellar helmet was a type of helmet used in Europe during the Early Middle Ages. Examples are characterized by caps made from overlapping lamellar scales, in addition to a brow plate, cheek guards, and camail. They are distinct from the contemporary spangenhelm and crested helmets also found in Europe; unlike those, which are influenced by Roman designs, Lamellenhelme display eastern influence and have primarily been found in southeastern Europe. They are mostly associated with the Avars of Pannonia and the Lombards of Italy.

<span class="mw-page-title-main">Horncastle boar's head</span> 7th-century Anglo-Saxon ornament depicting a boar

The Horncastle boar's head is an early seventh-century Anglo-Saxon ornament depicting a boar that probably was once part of the crest of a helmet. It was discovered in 2002 by a metal detectorist searching in the town of Horncastle, Lincolnshire. It was reported as found treasure and acquired for £15,000 by the Lincoln City and County Museum—now Lincoln Museum—where it is on permanent display.

<span class="mw-page-title-main">Broe helmet</span> Iron Age helmet

The Broe helmet is a decorated iron helmet from around the Vendel Period. Discovered around 1904 in a cremation grave in Broe, a farm on the Swedish island Gotland, it was located alongside other items including fragments of shields, weapons, bridles, and game pieces. Due to its extremely fragmented condition, only an incomplete reconstruction of the helmet is possible, but it appears to have been an example of the "crested helmets" that flourished in England and Scandinavia from the sixth through eleventh centuries.

<span class="mw-page-title-main">Hellvi helmet eyebrow</span> Iron Age helmet eyebrow fragment

The Hellvi helmet eyebrow is a decorative eyebrow from a Vendel Period helmet. It comprises two fragments; the arch is made of iron decorated with strips of silver, and terminates in a bronze animal head that was cast on. The eyebrow was donated to the Statens historiska museum in November 1880 along with several other objects, all said to be from a grave find in Gotland, Sweden.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.