The microKORG is a MIDI-capable digital synthesizer/vocoder from Korg featuring DSP-based analog modelling. The synthesizer is built in such a way that it is essentially a Korg MS-2000 with a programmable step arpeggiator (the MS-2000 has only six simple patterns), a less advanced vocoder (8 bands instead of 16 bands on the MS-2000), lack of motion sequencing (MS-2000 had three motion sequences), lack of an XLR microphone input, and in a smaller case with fewer real-time control knobs.
The microKORG was released in 2002 and is still in production as of 2022 [update] . It has sold an estimated 100,000 units sold as of May 2009. In September 2007 Korg released a limited edition of the microKORG with reverse-color keys, although the functionality was otherwise unchanged. At NAMM 2008, a successor dubbed the microKORG XL was introduced. [1] Available since early 2009, it uses Korg's MMT (Multi Modeling Technology) engine, borrowed from the newer and more powerful Radias/R3 synthesizers. Also, in late 2016, a slightly updated version was released, dubbed the MicroKORG S. This edition retains the same sound engine as the original MicroKORG, but offers an integrated speaker system (stereo + sub), updated color scheme & twice the patch memory. In 2022, a VST Version was released as part of the Korg Collection. [2]
The microKORG features a DSP-based synthesis engine, designed around the same engine found in the Korg MS2000. In Korg's terminology, the fundamental unit of sound is referred to as the "timbre". Each timbre consists of a pair of multi-function oscillators. Two timbres can be combined in one patch to create a four-oscillator "layer", which can in turn be used to create more complex sounds (although doing so halves the polyphony from four notes to two) [3] Oscillator one (OSC1) can produce one of several virtual analog-style waveforms, including sawtooth, square, triangle, and sine waves. Alternatively, OSC1 can produce a so-called "VOX" wave (which simulates human vocal formants), white noise, and one of 64 different digital waveforms created via harmonic additive synthesis. Some of these 64 waveforms (which are really single-cycle wavetables) were originally featured in the Korg DW-6000 & DW-8000 digital-analog hybrid synthesizers of the mid 1980s. The second oscillator (OSC2) is limited to sawtooth, square, and triangle waveforms.
Each waveform on OSC1 has a unique modulation feature, including wave morphing, Pulse-width modulation, and FM. OSC2 can be detuned, synchronized, and/or ring-modulated with OSC1 in order to create more complex sounds. OSC1 can also be replaced with the signal from one of the line-level inputs on the back of the unit, allowing for external signals to be processed as if they were an oscillator (via the filters, effects, or even ring-modulated by OSC2).
For further shaping of the sound, the microKORG offers several types of digital filters, including Low Pass (-12dB/Oct and -24dB/Oct), Band Pass (-12dB/Oct), and High Pass (-12dB/Oct) modes. [4]
Additionally, the unit provides a number of built-in effects, such as flanger, ensemble (chorus), phaser, and digital delay, all of which can be applied to external signals. For modulation, there are two independent LFOs, with six different waveforms, allowing for the creation of more complex, time-varying patches.
When playing a single timbre, the keyboard is limited to four-voice polyphony. In layer mode it generally has only two-voice polyphony, although one combination of polyphonic/mono layers allows for effective three-voice polyphony of the second timbre.
The microKORG groups its 128 factory preset sound patches into 8 groups:
A large knob changes the selected sound group. Each group has 16 different patches (two banks of eight); the active patch is selected by the eight LED-illuminated buttons on the front panel, while the accompanying A/B switch toggles between the two banks. All patches are user editable, and do not necessarily have to align with the genre groupings listed on the faceplate.
In 2016, Korg reissued the microKORG as the modified 'microKORG S'. This edition retains the engine and features of the original microKORG (as opposed to the XL/XL+, see below), but includes a new lighter-colored housing, built-in speakers, twice the original patch memory (256 slots) and a Favorites feature to assign 8 patches to the program buttons for easier selection.
The direct successor to the microKORG, the 'microKORG XL', utilizes the MMT (Multi Modelling Technology) engine, and is based on Korg's own R3 synthesizer. [5] The XL features a brand-new LCD display and two large Program Select knobs for easier patch access, though has fewer real-time controls than the original microKORG.
The microKORG XL groups its 128 factory preset sound patches into 8 groups:
and several sub categories:
Notably, the 'microKORG XL' features 17 different KAOSS derived effects, including phaser, flange, decimation, vibrato, tremolo and retrigger. The XL also features several included PCM Waveforms, including Piano, Brass Ensemble, nine Electric Piano and Clavinet, seven organ sounds (one of which emulates the Korg M1 Organ), a full String Orchestra, two variable formant waves and more than 32 digitally generated waveforms (SYNWAVE 6 is a ramp wave/inverted sawtooth). The XL adds two additional Waveform Modulation types: Phase Modulation and Unison (in which five stacked oscillators within 1 oscillator can be detuned and phased to achieve a richer sound.) The Unison Simulator is similar to the Supersaw waveform on the Roland JP-8000. The included "OSC MOD WAVEFORM" and "OSC2 SYNC" controllers are reminiscent of the Poly-Mod feature in the Sequential Circuits Prophet-5. The microKORG XL also includes a waveshaper (uncommon in most synthesizers) which will morph the current waveform into an approximation of the waveform desired, resulting in a harsh sound. The waveshaper also includes a third oscillator (Sub oscillator.)
Additional improvements include:
In 2014, Korg announced the RK-100S keytar, which is essentially a 37-key "keytar" version of the 'microKORG XL+', with many external differences and only two internal differences. On the inside, it sports the same exact features as the 'MicroKorg XL+', except it has 200 program storage instead of 128, and allowing for the long ribbon controller to serve as a modulation source. Externally the RK-100S is radically different, it lacks the ability to edit programs from the unit. Editing may only be done via a control app available for Mac and PC, and if one is daring enough, it is technically possible to create ones own editor using the available MIDI messages chart. 'MicroKORG XL' and 'XL+' patches may be downloaded into the unit one-by-one or en-masse, allowing patch editing to be done on a 'microKORG XL+'.
Even though the RK-100S is not marketed as a microKORG, the fact that its synthesis engine is identical makes it ideal for microKORG users wishing to perform live without needing to have a keyboard stand restricting their movement around a stage.
An analog synthesizer is a synthesizer that uses analog circuits and analog signals to generate sound electronically.
Ensoniq ESQ-1 is a 61-key, velocity sensitive, eight-note polyphonic and multitimbral synthesizer released by Ensoniq in 1985. It was marketed as a "digital wave synthesizer" but was an early Music Workstation. Although its voice generation is typically subtractive in much the same fashion as most analog synthesizers that preceded it, its oscillators are neither voltage nor "digitally controlled", but true digital oscillators, provided by a custom Ensoniq wavetable chip. The signal path includes analog resonant low-pass filters and an analog amplifier.
The Korg OASYS is a workstation synthesizer released in early 2005, 1 year after the successful Korg Triton Extreme. Unlike the Triton series, the OASYS uses a custom Linux operating system that was designed to be arbitrarily expandable via software updates, with its functionality limited only by the PC-like hardware.
The Korg MS-20 is a patchable semi-modular monophonic analog synthesizer which Korg released in 1978 and which was in production until 1983. It was part of Korg's MS series of instruments, which also included the single oscillator MS-10, the keyboardless MS-50 module, the SQ-10 sequencer, and the VC-10 Vocoder. Additional devices included the MS-01 Foot Controller, MS-02 Interface, MS-03 Signal Processor, and MS-04 Modulation Pedal.
The Korg DW-8000 is a polyphonic hybrid digital-analog synthesizer released in 1985. It blends digital waveforms with an analog filter and amplifier, followed by a digital delay for adding echo effects. It boasts eight-note polyphony and its keyboard is equipped with velocity sensitivity and aftertouch.
The Korg Poly-61(PS-61) is an analog synthesizer manufactured by Korg between 1982 and 1986. It was the first affordable synthesizer to feature two oscillators per voice, and was Korg's first synthesizer to feature digitally-controlled analog oscillators (DCOs). The Poly-61 marked a significant departure in design philosophy from previous Korg synthesizers by replacing the traditional array of dedicated control knobs on the front panel with a digital interface that required users to select parameters individually for adjustment.
The Korg MS2000 is a virtual analog synthesizer produced by the Japanese electronic musical instrument manufacturer Korg.
The Korg Wavestation is a vector synthesis synthesizer first produced in the early 1990s and later re-released as a software synthesizer in 2004. Its primary innovation was Wave Sequencing, a method of multi-timbral sound generation in which different PCM waveform data are played successively, resulting in continuously evolving sounds. The Wavestation's "Advanced Vector Synthesis" sound architecture resembled early vector synths such as the Sequential Circuits Prophet VS.
The Oberheim OB•12 is a Virtual Analog synthesizer, designed and realised by the Italian musical instrument manufacturer Viscount, in production between 2000 and 2005.
The Korg DSS-1 is a polyphonic sampling synthesizer released by Korg in 1986. As Korg's initial entry into the sampling market, the DSS-1 combines sampling, additive synthesis, and waveform drawing with an analog signal path. The DSS-1 was released a time when major synthesizer manufacturers like Yamaha and Casio were beginning to explore sampling, an area of sound design dominated by companies like Fairlight, E-mu, and Ensoniq. Korg did not stay long in the sampling arena; the DSS-1 was the company's only sampler until 1998 when Korg introduced sampling options on their Triton and Trinity series of workstations.
The Korg DS-8 is a digital eight-voice FM synthesizer released by Korg in 1987. Following an agreement with Yamaha for access to its research and development facilities, it was designed using Yamaha components and constructed under a licensing agreement. It introduced an analog-style interface for controlling FM sounds and could play different patches on each of its eight voices, marking it as Korg's first multi-timbral MIDI synthesizer. Accompanying its launch was the Korg 707, a more portable version of the DS-8, lacking digital effects but equipped with strap pegs for keytar performance.
The Korg RADIAS is a virtual analog synthesizer and Vocoder, released by Korg in 2006. The RADIAS' MMT engine was based on the Korg OASYS synthesizer module, providing for several different synthesis methods, two of which may be combined in a single voice e.g. phase distortion synthesis can be combined with subtractive synthesis. The different synthesis methods employed by MMT represent the majority of methods used historically in other Korg synthesizers: digital waveguide synthesis Korg first used in the Korg Z1 and phase distortion synthesis was first used in the Korg DS-8. This flexibility allows for very realistic emulations of past Korg synthesizers, though stays away from trying to emulate the Korg M1 and the Korg Wavestation,. As well as using the in-built waveforms for the basis of sound creation, the RADIAS allows for the input of an external signal which may be routed through the various sound shaping devices. The RADIAS has a comprehensive matrix modulation specification and to further enhance a sound the 'Wave Shaper' module allows for various sound distortion effects.
The Korg Mono/Poly (MP-4) is a paraphonic analog synthesizer released by Korg in 1981, bridging the gap between monophonic and polyphonic synthesis. Released in the same year as the Korg Polysix, as a complementary synth, The Mono/Poly is equipped with four VCOs and can operate as a four-voice paraphonic synth with limited capabilities, or as a monophonic synth using all four oscillators. Upon its release, it was the only monophonic synthesizer with an integrated quad-VCO design available on the market.
The AX80 is a polyphonic analogue keyboard synthesizer manufactured by Akai Professional in 1984. It was Akai's first venture into the professional electronic musical instrument market. The AX80 used digitally controlled oscillators (DCO) and filter circuitry based on the Curtis Electronics CEM 3372 integrated circuit. It was marketed as part of a line of project studio equipment called the Akai Music Studio System, which included the S612 digital sampler the MR16 drum machine, the MS08 sequencer, and the MG1212 multitrack tape recorder.
The AX60 is a polyphonic analogue keyboard synthesizer manufactured by Akai Professional in the mid-1980s. It was Akai's answer to the popular Roland Juno series synthesizers. The AX60 uses voltage-controlled analogue oscillators and filter circuitry based on the Curtis Electronics CEM 3394 integrated circuit.
The CZ series is a family of low-cost phase distortion synthesizers produced by Casio in the mid-1980s. Eight models of CZ synthesizers were released: the CZ-101, CZ-230S, CZ-1000, CZ-2000S, CZ-2600S, CZ-3000, CZ-5000, and the CZ-1. Additionally, the home-keyboard model CT-6500 used 48 phase distortion presets from the CZ line. The CZ synthesizers' price at the time of their introduction made programmable synthesizers affordable enough to be purchased by garage bands. Yamaha soon introduced their own low-cost digital synthesizers, including the DX-21 (1985) and Yamaha DX100, in light of the CZ series' success.
The Korg Z1 is a digital synthesizer released by Korg in 1997. The Z1 built upon the foundation set by the monophonic Prophecy released two years prior by offering 12-note polyphony and featuring expanded oscillator options, a polyphonic arpeggiator and an XY touchpad for enhanced performance interaction. It was the world's first multitimbral physical modelling synthesizer.
The Arturia MiniBrute is a synthesizer manufactured by Arturia. Although the MiniBrute was the first piece of analog hardware created by Arturia—which had previously exclusively marketed software synthesizers—it generated strong sales.
The Korg Minilogue is a polyphonic analog synthesizer released in 2016 by Korg. It offers users four-voice polyphony with two analog VCOs per-voice and was designed to be affordable. It was designed by Korg engineer and synthesizer designer Tatsuya Takahashi, who said "the concept of the Minilogue was to build an analog synthesizer that doesn't rely on the fame and success of an old synth".