The first member of the family came to market in 1982, briefly known as the 16032 before being renamed as the 32016.[1] It was the first general-purpose microprocessor on the market that used 32-bit data internally: the Motorola 68000 had 32-bit registers and instructions to perform 32-bit arithmetic, but used a 16-bit ALU for arithmetic operations on data, and thus took twice as long as the 32016 to perform those arithmetic operations.[2][3] However, the 32016 contained many bugs and often could not be run at its rated speed. These problems, and the presence of the otherwise similar 68000 which had been available since 1980, led to little use in the market despite considerable early interest.
Several improved versions followed, including 1985's 32032 which was essentially a bug-fixed 32016 with an external 32-bit data bus. While it offered about 50% better speed than the 32016, it was outperformed by the 32-bit Motorola 68020, released a year prior. The 32532, released in 1987, outperformed the contemporary Motorola 68030 by almost two times, but by this time most interest in microprocessors had turned to RISC platforms and this otherwise excellent design saw almost no use as well.
National was working on further improvements in the 32732, but eventually gave up attempting to compete in the central processing unit (CPU) space. Instead, the basic 32000 architecture was combined with several support systems and relaunched as the Swordfishmicrocontroller. This had some success in the market before it was replaced by the CompactRISC architecture in mid-1990s.
Design concept
NS32008 microprocessor
The NS32000 series traces its history to an effort by National Semiconductor to produce a single-chip implementation of the VAX-11 architecture.[4] The VAX is well known for its highly "orthogonal" instruction set architecture (ISA), in which any instruction can be applied to any data. For instance, an ADD instruction might add the contents of two processor registers, or one register against a value in memory, two values in memory, or use the register as an offset against an address. This flexibility was considered the paragon of design in the era of complex instruction set computers (CISC).[3]
National took Digital Equipment Corporation (DEC) to court in California to ensure the legality of the design, but when DEC had the lawsuit moved to Massachusetts, DEC's home state, the lawsuit was dropped and the Series 32000 architecture was developed instead. Although the new instruction set architecture was not VAX-11 compatible, it did retain its highly "orthogonal" design philosophy. That is, every instruction could be used with any type of data. Articles of the time also referred to this as "symmetrical".[3]
The original processor family consisted of the NS16032 CPU and a NS16C032 low-power variant, both having a 16-bit data path and so requiring two machine cycles to load a single 32-bit word. Both could be used with the NS16082 memory management unit (MMU), which provided 24-bit virtual memory support for up to 16MB physical memory. The NS16008 was a cut-down version with an 8-bit external data path and no virtual memory support, which had a reduced pin count and was thus somewhat easier to implement.[3] Both the NS16008 and NS16016 were to feature an emulation mode for the Intel 8080 running at four times the speed of that processor.[5]
At the same time, National Semiconductor also announced two future versions, the NS32032 and NS32132. The former was essentially a version of the NS16032 with a 32-bit external data bus, allowing it to read data at twice the rate. This was project to be released in 1984. The NS32132 was a version with a 29-bit internal addresses and 32-bit external, allowing it to address a complete 4GB of memory. It was to be released in 1985.[3]
The processors have 8 general-purpose 32-bit registers, plus a series of special-purpose registers:
Frame pointer
Stack pointer (one each for user and supervisor modes)
Static base register, for referencing global variables
Link base register for dynamically linked modules (object orientation)
Program counter
A typical processor status register, with a low-order user byte and a high-order system byte.
(Additional system registers not listed).
The instruction set is very much in the CISC model, with 2-operand instructions, memory-to-memory operations, flexible addressing modes, and variable-length byte-aligned instruction encoding. Addressing modes can involve up to two displacements and two memory indirections per operand as well as scaled indexing, making the longest conceivable instruction 23 bytes. The actual number of instructions is much lower than that of contemporary RISC processors.
Unlike some other processors, automatic increment of the base register is not provided; the only exception is a "top of stack" addressing modes that pop sources and push destinations. Uniquely, the size of the displacement is encoded in its most significant bits: 0, 10 and 11 preceded 7-, 14- and 30-bit signed displacements. (Although the processors are otherwise consistently little-endian, displacements in the instruction stream are stored in big-endian order).
General-purpose operands are specified using a 5-bit field. To this can be added an index byte (specifying the index register and 5-bit base address), and up to 2 variable-length displacements per operand.
32016
The first chip in the series was originally referred to as the 16032, but later renamed 32016 to emphasize its 32-bit internals. This contrasts it with its primary competitor in this space, 1979's Motorola 68000 (68k). The 68k used 32-bit instructions and registers, but its arithmetic logic unit (ALU), which controls much of the overall processing task, was only 16-bit. This meant it had to cycle 32-bit data through the ALU twice—in two 16-bit halves—to complete a 32-bit operation. In contrast, the NS32000 has a 32-bit ALU, so that 32-bit and 16-bit instructions take the same time to complete.
The 32016 first shipped in 1982 in a 46-pin DIP package. To fit a 32-bit chip into a 46-pin package required the data bus to be 16-bits wide, and to share pins with the 24-bit address bus. By sharing pins, external hardware had to latch the address for the memory address while the pins were used in data mode, and this introduces a 1-cycle delay in every access. So while the internal 32-bit implementation improves performance, the small pin-count decreases it again.
It may have been the first 32-bit chip to reach mass production and sale (at least according to National's marketing). In a report in a June 1983 publication, however, it was remarked that National was "promising production quantities this summer" of 16032 parts, having been "shipping sample quantities for several months", with the floating point co-processor sampling "this month".[6]
Although a 1982 introduction post-dates the 68k by about two years, the 68k was not yet being widely used in the market and the 32016 generated significant interest. Unfortunately, the early versions were filled with bugs and could rarely be run at their rated speed. By 1984, after two years, the errata list still contained items specifying uncontrollable conditions that would result in the processor coming to a halt, forcing a reset.
The original product roadmap envisaged 6MHz and 10MHz parts during 1983 and 12MHz and 14MHz parts during 1984.[3] However, press reports in 1984 indicated difficulties in keeping to this roadmap, with it reportedly having taken five months to increase the frequency of the parts from 6MHz to 8MHz, and with representatives estimating a further "two, three or five months" to increase the frequency to 10MHz. Two unspecified chips of the five in the chipset were reported to be the cause of these problems.[7] An early 1985 article about the 32016-based Whitechapel MG-1 workstation noted that the 32081 memory management unit was "suffering from bugs" and had been situated on its own board providing hardware fixes.[8] In 1986, Texas Instruments announced a "fully qualified 10MHz TI32000 32-bit microprocessor chip set" consisting of the TI32016 CPU and TI32082 memory management unit as 48-pin devices, the TI32201 timing control unit and TI32081 floating-point unit as 24-pin devices, and the TI32202 interrupt control unit as a 40-pin device, with the five-device chipset "priced at $289 in 100-unit quantities".[9]
National changed its design methodology to make it possible to get the part into production and a design system based on the language "Z" was co-developed with the University of Tel-Aviv, close to the "NSC" design centre in Herzliya, Israel. The "Z" language is similar to today's Verilog and VHDL, but has a Pascal-like syntax and is optimized for two-phase clock designs. However, by the times the fruit of these efforts were being felt in the design, numerous 68k machines were already on the market, notably the Apple Macintosh, and the 32016 never saw widespread use.
The 32016 has a 16-bit external data bus, a 24-bit external address bus, and a full 32-bit instruction set. It also includes a coprocessor interface, allowing coprocessors such as FPUs and MMUs to be attached as peers to the main processor. The MMU is based on demand paging virtual memory, which is the most unusual feature compared to the segmented memory approach used by the competition, and has become the standard for how microprocessors are designed today. The architecture supports an instruction restart mechanism on a page fault, which is much cleaner than the Motorola approach to dump the internal status on a page fault, which has to be read back, before the instruction is continued.
NS32016 microprocessorNS32081 FPU
While often compared to the 68k's instruction set, this was rejected by NSC employees; one of the key marketing phrases of the time was "Elegance is Everything", comparing the highly orthogonal Series 32000 to the "kludge". One key difference is Motorola's use of address registers and data registers, with instructions only working on either address or data registers. The Series 32000 has general-purpose registers, described as "address-data" registers in technical documentation.[10]
32032
NS32032 microprocessor
The 32032 was introduced in 1984. It is almost completely compatible with the 32016, but features a 32-bit data bus (although keeping the 24-bit address bus) for somewhat faster performance, described as "minicomputer performance" comparable with that of a VAX-11 system.[11]:39 There was also a 32008, a 32016 with a data bus cut down to 8-bits wide for low-cost applications. It is philosophically similar to the MC68008, and equally unpopular.
National also produced a series of related support chips like the NS32081 floating point unit (FPU), NS32082 memory management unit (MMU), NS32203 direct memory access (DMA) and NS32202 interrupt controllers. With the full set plus memory chips and peripherals, it was feasible to build a 32-bit computer system capable of supporting modern multi-tasking operating systems, something that had previously been possible only on expensive minicomputers and mainframes.
Die photos
NS16032 CPU
NS16081 FPU
NS32032 CPU
NS32081 FPU
NS32082 MMU
NS32202 Interrupt controller
NS32203 DMA controller
32332, 32532
In 1985, National Semi introduced the NS32332, a much-improved version of the 32032. From the datasheet, the enhancements include "the addition of new dedicated addressing hardware (consisting of a high speed ALU, a barrel shifter and an address register), a very efficient increased (20 bytes) instruction prefetch queue, a new system/memory bus interface/protocol, increased efficiency slave processor protocol and finally enhancements of microcode." There was also a new NS32382 MMU, NS32381 FPU and the (very rare) NS32310 interface to a Weitek FPA. The aggregate performance boost of the NS32332 from these enhancements only made it 50 percent faster than the original NS32032, and therefore less than that of the main competitor, the MC68020.
National Semi introduced the NS32532 in early 1987. Running at 20-, 25- & 30-MHz, it was a complete redesign of the internal implementation with a five-stage pipeline, an integrated Cache/MMU and improved memory performance, making it about twice as performant as the competing MC68030 and i80386. At this stage RISC architectures were starting to make inroads, and the main competitors became the now equally dead AM29000 and MC88000, which was considered faster than the NS32532. For floating-point, the NS32532 used the existing NS32381 or the NS32580 interface to a Weitek FPA.[12] The NS32532 was the basis of the PC532, a "public domain" hardware project, and one of the few to produce a useful machine running a real operating system (in this case, Minix or NetBSD).
The semi-mythical NS32732 (sometimes called NS32764), envisioned as the high-performance successor to the NS32532, never came to the market.
Swordfish
A derivative of the NS32732 called Swordfish was aimed at embedded systems and arrived in about 1990. Swordfish has an integrated floating point unit, timers, DMA controllers and other peripherals not normally available in microprocessors. It has a 64-bit data bus and is internally overclocked from 25 to 50MHz. The chief architect of the Swordfish is Donald Alpert, who went on to manage the architectural team designing the Pentium. The Pentium internal microarchitecture is similar to the preceding Swordfish.
The focus of Swordfish was high-end PostScriptlaser printers, and performance was exceptional at the time. Competing solutions could render about one new page per minute, but the Swordfish demo unit would print out sixteen pages per minute, limited only by the laser-engine mechanics. On each page it would print out how much time it was idling, waiting for the engine to complete.
The Swordfish die is huge, and it was eventually decided to drop the project altogether, and the product never went into production. The lessons from the Swordfish were used for the CompactRISC designs. In the beginning, there were both a CompactRISC-32 and a CompactRISC-16, designed using "Z". National never brought a chip to the market with the CompactRISC-32 core. National's Research department worked with the University of Michigan to develop the first synthesizable Verilog Model, and Verilog was used from the CR16C and onwards.
Others
Versions of the older NS32000 line for low-cost products such as the NS32CG16, NS32CG160, NS32FV16, NS32FX161, NS32FX164 and the NS32AM160/1/3, all based on the NS302CG16 were introduced from 1987 and onwards.
These processors had some success in the laser printer and fax market, despite intense competition from AMD and Intel RISC chips. Especially the NS32CG16 should be noted. The key difference between this and the NS32C016 is the integration of the expensive timing control unit (TCU) which generates the needed two-phase clock from a crystal, and the removal of the floating point coprocessor support, which freed up microcode space for the useful BitBLT instruction set, which significantly improves the performance in laser printer operations, making this 60,000 transistor chip faster than the 200,000 transistor MC68020. The NS32CG160 is the CG16 with timers and DMA peripherals, while the NS32FV/FX16x chips have extra DSP functionality on top of the CG16 BitBLT core for the fax and answering machine market. They are complemented by the NS32532 based NS32GX32 later. Unlike the previous chips, there was no extra hardware. The NS32GX32 is the NS32532 without the MMU sold at an attractive price for embedded system. In the beginning, this was just a remarked chip. It is unclear if the chip was redesigned for lower-cost production.
Datasheets exist for an NS32132, apparently designed for multiprocessor systems. This is the NS32032 extended with an arbiter. The bus usage of the NS32032 is about 50 percent, owing to its very compact instruction set, or its very slow pipeline as competitors would phrase it. Indeed, one suggested application of the NS32032 was as part of a "fault-tolerant transaction system" employing "two 32032s in parallel and comparing results on alternate memory cycles to detect soft errors".[6] The NS32132 chip allows a pair of CPUs to be connected to the same memory system, without much change of the PCB. Prototype systems were built by Diab Data AB in Sweden, but did not perform as well as the single-CPU MC68020 system designed by the same company.
Symmetric Computer Systems S/375 – NS32016, used to cross-develop 386BSD
Syte Information Technology Model 300 – NS32032-based Unix graphics workstation,[16] several such "multiple tightly coupled microcomputers organized in a mainframe architecture" comprising the Syte Series 3000 "micro-mainframe" running the Global Environment Manager to manage multiple virtual environments on each processor node,[17] with Syte eventually failing before initial product shipments[18]
Tektronix 6130 and 6250 Workstation – NS32016 and NS32032
Tolerant Systems Eternity Series – NS32032 w/ NS32016 I/O processor
In June 2015, Udo Möller released a complete Verilog implementation of an NS32000 processor on OpenCores.[19] Fully software-compatible with an NS32532 CPU with N32381 FPU, it is significantly faster when implemented on an FPGA,[20] both operating at a higher clock rate and using fewer cycles per instruction.
Related Research Articles
The Intel 386, originally released as the 80386 and later renamed i386, was the first x86 32-bit microprocessor designed by Intel. Pre-production samples of the 386 were released to select developers in 1985, while mass production commenced in 1986. The processor was a significant evolution in the x86 architecture, extending a long line of processors that stretched back to the Intel 8008. The 386 was the central processing unit (CPU) of many workstations and high-end personal computers of the time. The 386 began to fall out of public use starting with the release of the i486 processor in 1989, while in embedded systems the 386 remained in widespread use until Intel finally discontinued it in 2007.
The Intel 486, officially named i486 and also known as 80486, is a microprocessor introduced in 1989. It is a higher-performance follow-up to the Intel 386. It represents the fourth generation of binary compatible CPUs following the 8086 of 1978, the Intel 80286 of 1982, and 1985's i386.
A microprocessor is a computer processor for which the data processing logic and control is included on a single integrated circuit (IC), or a small number of ICs. The microprocessor contains the arithmetic, logic, and control circuitry required to perform the functions of a computer's central processing unit (CPU). The IC is capable of interpreting and executing program instructions and performing arithmetic operations. The microprocessor is a multipurpose, clock-driven, register-based, digital integrated circuit that accepts binary data as input, processes it according to instructions stored in its memory, and provides results as output. Microprocessors contain both combinational logic and sequential digital logic, and operate on numbers and symbols represented in the binary number system.
The Motorola 68000 is a 16/32-bit complex instruction set computer (CISC) microprocessor, introduced in 1979 by Motorola Semiconductor Products Sector.
The Motorola 68020 is a 32-bit microprocessor from Motorola, released in 1984. A lower-cost version was also made available, known as the 68EC020. In keeping with naming practices common to Motorola designs, the 68020 is usually referred to as the "020", pronounced "oh-two-oh" or "oh-twenty".
The Motorola 68030 ("sixty-eight-oh-thirty") is a 32-bit microprocessor in the Motorola 68000 family. It was released in 1987. The 68030 was the successor to the Motorola 68020, and was followed by the Motorola 68040. In keeping with general Motorola naming, this CPU is often referred to as the 030.
The Motorola 68060 ("sixty-eight-oh-sixty") is a 32-bit microprocessor from Motorola released in April 1994. It is the successor to the Motorola 68040 and is the highest performing member of the 68000 series. Two derivatives were produced, the 68LC060 and the 68EC060.
The 88000 is a RISC instruction set architecture developed by Motorola during the 1980s. The MC88100 arrived on the market in 1988, some two years after the competing SPARC and MIPS. Due to the late start and extensive delays releasing the second-generation MC88110, the m88k achieved very limited success outside of the MVME platform and embedded controller environments. When Motorola joined the AIM alliance in 1991 to develop the PowerPC, further development of the 88000 ended.
The Motorola 68000 series is a family of 32-bit complex instruction set computer (CISC) microprocessors. During the 1980s and early 1990s, they were popular in personal computers and workstations and were the primary competitors of Intel's x86 microprocessors. They were best known as the processors used in the early Apple Macintosh, the Sharp X68000, the Commodore Amiga, the Sinclair QL, the Atari ST and Falcon, the Atari Jaguar, the Sega Genesis and Sega CD, the Philips CD-i, the Capcom System I (Arcade), the AT&T UNIX PC, the Tandy Model 16/16B/6000, the Sun Microsystems Sun-1, Sun-2 and Sun-3, the NeXT Computer, NeXTcube, NeXTstation, and NeXTcube Turbo, early Silicon Graphics IRIS workstations, the Aesthedes, computers from MASSCOMP, the Texas Instruments TI-89/TI-92 calculators, the Palm Pilot, the Control Data Corporation CDCNET Device Interface, the VTech Precomputer Unlimited and the Space Shuttle. Although no modern desktop computers are based on processors in the 680x0 series, derivative processors are still widely used in embedded systems.
The Am386 CPU is a 100%-compatible clone of the Intel 80386 design released by AMD in March 1991. It sold millions of units, positioning AMD as a legitimate competitor to Intel, rather than being merely a second source for x86 CPUs.
Intel's i960 was a RISC-based microprocessor design that became popular during the early 1990s as an embedded microcontroller. It became a best-selling CPU in that segment, along with the competing AMD 29000. In spite of its success, Intel stopped marketing the i960 in the late 1990s, as a result of a settlement with DEC whereby Intel received the rights to produce the StrongARM CPU. The processor continues to be used for a few military applications.
The NXP ColdFire is a microprocessor that derives from the Motorola 68000 family architecture, manufactured for embedded systems development by NXP Semiconductors. It was formerly manufactured by Freescale Semiconductor which merged with NXP in 2015.
The POWER1 is a multi-chip CPU developed and fabricated by IBM that implemented the POWER instruction set architecture (ISA). It was originally known as the RISC System/6000 CPU or, when in an abbreviated form, the RS/6000 CPU, before introduction of successors required the original name to be replaced with one that used the same naming scheme (POWERn) as its successors in order to differentiate it from the newer designs.
The AMD Am29000, commonly shortened to 29k, is a family of 32-bit RISC microprocessors and microcontrollers developed and fabricated by Advanced Micro Devices (AMD). Based on the seminal Berkeley RISC, the 29k added a number of significant improvements. They were, for a time, the most popular RISC chips on the market, widely used in laser printers from a variety of manufacturers.
The Clipper architecture is a 32-bit RISC-like instruction set architecture designed by Fairchild Semiconductor. The architecture never enjoyed much market success, and the only computer manufacturers to create major product lines using Clipper processors were Intergraph and High Level Hardware, although Opus Systems offered a product based on the Clipper as part of its Personal Mainframe range. The first processors using the Clipper architecture were designed and sold by Fairchild, but the division responsible for them was subsequently sold to Intergraph in 1987; Intergraph continued work on Clipper processors for use in its own systems.
The RISC Single Chip, or RSC, is a single-chip microprocessor developed and fabricated by International Business Machines (IBM). The RSC was a feature-reduced single-chip implementation of the POWER1, a multi-chip central processing unit (CPU) which implemented the POWER instruction set architecture (ISA). It was used in entry-level workstation models of the IBM RS/6000 family, such as the Model 220 and 230.
The R3000 is a 32-bit RISC microprocessor chipset developed by MIPS Computer Systems that implemented the MIPS I instruction set architecture (ISA). Introduced in June 1988, it was the second MIPS implementation, succeeding the R2000 as the flagship MIPS microprocessor. It operated at 20, 25 and 33.33 MHz.
The R4000 is a microprocessor developed by MIPS Computer Systems that implements the MIPS III instruction set architecture (ISA). Officially announced on 1 October 1991, it was one of the first 64-bit microprocessors and the first MIPS III implementation. In the early 1990s, when RISC microprocessors were expected to replace CISC microprocessors such as the Intel i486, the R4000 was selected to be the microprocessor of the Advanced Computing Environment (ACE), an industry standard that intended to define a common RISC platform. ACE ultimately failed for a number of reasons, but the R4000 found success in the workstation and server markets.
The PowerPC 600 family was the first family of PowerPC processors built. They were designed at the Somerset facility in Austin, Texas, jointly funded and staffed by engineers from IBM and Motorola as a part of the AIM alliance. Somerset was opened in 1992 and its goal was to make the first PowerPC processor and then keep designing general purpose PowerPC processors for personal computers. The first incarnation became the PowerPC 601 in 1993, and the second generation soon followed with the PowerPC 603, PowerPC 604 and the 64-bit PowerPC 620.
Since 1985, many processors implementing some version of the MIPS architecture have been designed and used widely.
References
↑ Series 32000 Software Catalog. National Semiconductor Corporation. 1984. Retrieved 8 November 2021. We have recently renamed our 32-bit microprocessor products from the NS16000 family to Series 32000. This program was effective immediately following the signing of Texas Instruments, Inc. as our second source for the Series 32000.
↑ "Components". Computerworld. 16 June 1986. p.130. Retrieved 9 February 2022.
↑ TI32000 Family Data Manual. Texas Instruments Incorporated. 1985. pp.2–24. Retrieved 8 November 2021. All address-data registers are available to all instructions. Thus, the compiler has freedom in its use of the registers and needn't do much housekeeping. The architecture also enables address-data registers to be used as accumulators, data registers, and address pointers. This represents a great improvement over machines that permit only a few registers to serve as address pointers, creating a bottleneck in address calculations, a very important function in high-level language programming.
Trevor G. Marshall, George Scolaro and David L. Rand: The Definicon DSI-32 Coprocessor. Micro Cornucopia, Aug/September 1985,
Trevor G. Marshall, George Scolaro and David L. Rand: The DSI-32 Coprocessor Board. Part 1, BYTE, August 1985, pp 120–136; Part 2, BYTE, September 1985, p 116.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
