North Rochester, New Hampshire

Last updated

North Rochester, New Hampshire
Unincorporated community
Spaulding Fibre Shoe Counter Catalog Cover 1915.jpg
1915 catalog cover for "Spaulding's Fibre Counters Guaranteed", showing a rendering of the North Rochester plant at night.
USA New Hampshire location map.svg
Red pog.svg
North Rochester
Usa edcp location map.svg
Red pog.svg
North Rochester
Coordinates: 43°22′22″N70°59′07″W / 43.37278°N 70.98528°W / 43.37278; -70.98528
Country United States
State New Hampshire
County Strafford
City Rochester
Elevation
275 ft (84 m)
Time zone UTC-5 (Eastern (EST))
 • Summer (DST) UTC-4 (EDT)
Area code 603
GNIS feature ID868810 [1]

North Rochester is a community in the city of Rochester, New Hampshire, United States, and is the site of the third leatherboard mill built by Jonas Spaulding. Jonas' sons were Leon C., Huntley N. and Rolland H., of whom Huntley N. and Rolland H. would serve as governors of New Hampshire.

Contents

Geography

North Rochester is located in the northern corner of the city of Rochester. The Salmon Falls River, which forms the border between New Hampshire and Maine, runs along the eastern edge of the community. The town of Milton, New Hampshire, is directly to the north. New Hampshire Route 125 (Milton Road) runs through the center of North Rochester, leading north 2.5 miles (4.0 km) to the center of Milton and south 5 miles (8 km) to downtown Rochester. The Spaulding Turnpike (New Hampshire Route 16) runs along a hillside on the western edge of the community.

History

1906 postcard picture of J Spaulding & Sons Company Mill at North Rochester, NH 1906 Postcard Picture of J Spaulding & Sons Company Mill at North Rochester, NH.jpg
1906 postcard picture of J Spaulding & Sons Company Mill at North Rochester, NH

Once his Milton New Hampshire Leatherboard Mill was running full, Jonas Spaulding explored for another site on which to expand the business. Ira Jones, a hydraulic engineer native to the area, [2] directed Jonas to the old Cottles Woolen Mill site in North Rochester. [3] At the time of Jonas' investigation the rippling water of the Salmon Falls River at the Cottles mill site was a feature on a pleasant day's buggy ride that followed a loop. Ruth Howland [4] reported that the buggy ride would begin in Rochester with a drive up the Milton Road to North Rochester then a cross over the Salmon Falls River was made into Maine. The rippling water at the Cottles Mill site would be viewed on this crossing. The loop would then continue on the Maine side of the Salmon Falls River to East Rochester, there crossing the river to return to Rochester. Jonas decided this would be a good site and started construction on a second leatherboard mill on the Salmon Falls River. The first phase of the project was the construction of a canal with masonry walls. The canal ran 100 feet (30 m) and was 20 feet (6.1 m) wide. The masonry walls were 6 to 10 feet (1.8 to 3.0 m) thick. The next phase of construction was building a solid masonry mass 20 feet (6.1 m) square where the mill wheel was placed (see photo).

Next, a dam was built on the Salmon Falls River that was 160 feet (49 m) long from abutment to abutment. The dam created Spaulding Pond on the river, which extends north for a mile into Milton. The factory building constructed for the mill measured 52 by 200 feet (16 by 61 m) and was four stories high (see postcard photo). Mammoth timbers were used in finishing this solidly constructed mill. When the North Rochester mill started up it, like Milton, would have a Leatherboard capacity of about 7 tons a day.

In 1900, before the North Rochester leatherboard mill was completed, Jonas Spaulding died. Leon C. Spaulding became President of J. Spaulding & Sons Company. With the completion of the mill in North Rochester the Spaulding brothers acquired and started several auxiliary businesses to use and convert the company's leatherboard. In 1900 after the startup of the North Rochester mill, the brothers added to the plant special machinery that was designed to produce shoe counters. In 1898 Spaulding Brothers Company had been assigned US Patent 606,375 for Counter-Cutting Machine from Daniel L. Chandler of Ayer, Massachusetts. In 1902 the brothers acquired Kennebunk Manufacturing Co in Kennebunk, Maine, which company had been making fiberboard lunch boxes since 1898. Later Kennebunk would manufacture violin cases and radio speaker horns. Also in 1902 the Spaulding brothers started a subsidiary, Spaulding Perkins, which manufactured fiberboard receptacles. Spaulding Perkins was the nucleus of Spaulding's material handling division which survives today as Bayhead Products Company. Also in 1902 Leon, Huntley, and Rolland Spaulding (Jonas' sons) brought the Spaulding Brothers (Jonas & Waldo) operations in Townsend Harbor, Massachusetts, under the banner of J. Spaulding & Sons Company. In 1906 the brothers purchased a cutdown machine that could be used to produce products made of multiple plies of fibreboard. It was installed in the North Rochester plant. From this purchase the vulcanized fibre operation in Tonawanda, New York, would develop.

Bronze plaque on masonry that enclosed mill wheel at J Spaulding & Sons Company Mill in North Rochester J Spaulding & Sons Company Bronze Plaque.JPG
Bronze plaque on masonry that enclosed mill wheel at J Spaulding & Sons Company Mill in North Rochester

The company name changed to Spaulding Fibre Company in 1924. The first of the three Spaulding brothers to die was Leon, in East Sebago, Maine, on September 11, 1924 [5] while overseeing an expansion of the Tonawanda plant that included the addition of a continuous vulcanized fibre-making line. Leon split his time while he personally managed the plant in Tonawanda between the Statler Hotel in Buffalo, New York, and his summer estate in East Sebago. Leon had fallen ill with heart problems five months before his death. On March 14, 1942, Rolland died at the Frisbie Memorial Hospital in Rochester, an institution that benefited from the philanthropy of the Spaulding family. [6]

A disaster befell Spaulding Fibre Company when in 1944 when the North Rochester plant burned. It was rebuilt and reopened in 1946. Huntley N. Spaulding, the last surviving son of Jonas Spaulding, set the cornerstone for the rebuilt mill. [7] When the mill was rebuilt it was designed to make transformer insulation board. At the time of its reopening it was hailed as the most modern fibreboard plant in the world. The plant in North Rochester served as the center for the Spaulding Brothers, and the company's corporate offices remained in Rochester until after Huntley's death on November 11, 1955, after which they were relocated to Tonawanda in 1960. After Huntley's death, Spaulding Fibre Company became part of a charitable trust that Huntley and his only sister Marion S. Potter had set up to disperse their remaining wealth within 15 years of the last to die. Marion S. Potter followed her brother in death on September 27, 1957.

Sons of Jonas Spaulding Sons of Jonas Spaulding.jpg
Sons of Jonas Spaulding

Related Research Articles

<span class="mw-page-title-main">Wakefield, New Hampshire</span> Town in New Hampshire, United States

Wakefield is a town in Carroll County, New Hampshire, United States. The population was 5,201 at the 2020 census. The town includes the villages of Wakefield Corner, East Wakefield, North Wakefield, Sanbornville, Union, Woodman and Province Lake. Wakefield Corner, popular with tourists, is a picturesque hilltop village of antique buildings. The state of Maine is on the eastern border of Wakefield.

<span class="mw-page-title-main">Milton, New Hampshire</span> Town in New Hampshire, United States

Milton is a town in Strafford County, New Hampshire, United States. The population was 4,482 at the 2020 census. A manufacturing, resort and residential town, Milton includes the village of Milton Mills. The primary village in town, where 593 people resided at the 2020 census, is defined as the Milton census-designated place (CDP), and is located along New Hampshire Route 125 and the Salmon Falls River, just north of Route 75.

<span class="mw-page-title-main">Rochester, New Hampshire</span> City in New Hampshire

Rochester is a city in Strafford County, New Hampshire, United States. The population was 32,492 at the 2020 census. In addition to the downtown area, the city contains the villages of East Rochester, Gonic, and North Rochester. Rochester is home to Skyhaven Airport and part of Baxter Lake.

<span class="mw-page-title-main">Somersworth, New Hampshire</span> City in New Hampshire, United States

Somersworth is a city in Strafford County, New Hampshire, United States. The population was 11,855 at the 2020 census. Somersworth has the smallest area and third-lowest population of New Hampshire's 13 cities.

<span class="mw-page-title-main">Tonawanda (city), New York</span> City in New York, United States

Tonawanda is a city in Erie County, New York, United States. The population was 15,129 at the 2020 census. It is at the northern edge of Erie County, south across the Erie Canal from North Tonawanda, east of Grand Island, and north of Buffalo. It is part of the Buffalo-Niagara Falls metropolitan area.

<span class="mw-page-title-main">Salmon Falls River</span> River in New Hampshire, United States

The Salmon Falls River is a tributary of the Piscataqua River in the U.S. states of Maine and New Hampshire. It rises at Great East Lake, Newichawannock Canal, and Horn Pond and flows south-southeast for approximately 38 miles (61 km), forming the border between York County, Maine, and Strafford County, New Hampshire.

The Spaulding Turnpike is a 33.2-mile (53.4 km) north-south toll road in eastern New Hampshire. Nearly its entire length is overlapped by New Hampshire Route 16. Its southern terminus is at the Portsmouth Traffic Circle in Portsmouth, a terminus it shares with U.S. Route 4 and NH 16. Its northern terminus is at an interchange with New Hampshire Route 125 in Milton, where NH 16 continues north as a surface road.

<span class="mw-page-title-main">New Hampshire Route 16</span> North-south state highway in New Hampshire, US

New Hampshire Route 16 is a 154.771-mile (249.080 km), north–south state highway in New Hampshire, United States, the main road connecting the Seacoast region to the Lakes Region and the White Mountains. Much of its length is close to the border with Maine. The section from Portsmouth to Milton is a controlled-access toll highway known as the Spaulding Turnpike. Between Milton and Chocorua, and between Conway and Glen, it is known as the White Mountain Highway. It is known as Chocorua Mountain Highway between Chocorua and Conway and various other local names before crossing into Maine about 20 miles (32 km) south of the Canadian border. Portions of NH 16 run concurrent with U.S. Route 4 (US 4), US 202, NH 25, and US 302, and US 2.

<span class="mw-page-title-main">New Hampshire Route 125</span> State highway in southeastern New Hampshire, US

New Hampshire Route 125 is a 51.994-mile-long (83.676 km) north–south state highway in Rockingham, Strafford and Carroll counties in southeastern New Hampshire. The southern terminus is in Plaistow at the Massachusetts state line, where the road continues south into Haverhill as Massachusetts Route 125. The northern terminus is in Wakefield at New Hampshire Route 16 and New Hampshire Route 153.

<span class="mw-page-title-main">Townsend Harbor, Massachusetts</span>

Townsend Harbor is a village in Townsend, Massachusetts, containing Harbor Pond dammed from the Squannacook River. At this location Jonas Spaulding and his brother Waldo started a mill in 1873 that made leatherboard. They did business as Spaulding Brothers. Their family business expanded to locations in New Hampshire and western New York.

<span class="mw-page-title-main">Rolland H. Spaulding</span> American politician

Rolland Harty Spaulding was an American manufacturer and Republican politician. He was the 55th governor of New Hampshire from 1915 to 1917.

<span class="mw-page-title-main">Huntley N. Spaulding</span> American politician (1869–1955)

Huntley Nowel Spaulding was an American manufacturer and Republican politician from Rochester, New Hampshire. He served as the 61st governor of New Hampshire from 1927 to 1929. In addition, he was notable for his philanthropy in health and education.

<span class="mw-page-title-main">2006 New England flood</span>

The New England Flood of May 2006, often locally referred to as the Mother's Day Flood, was a flood event that occurred in New England, especially in New Hampshire and Massachusetts, during the month of May, 2006. It started on May 11, 2006 as a result of an unusually strong low pressure system that stalled over the central United States, drawing copious amounts of moisture from the Atlantic Ocean. Most of this moisture was drawn directly over New England, producing continuous heavy rain that led to record flooding near several rivers. It was described as the worst flooding since the New England Hurricane of 1938. There were at least two fatalities, both in Topsfield, Massachusetts. Some called it the Mother's Day Flood, since it occurred on that holiday.

<span class="mw-page-title-main">Presumpscot River</span> River in Maine, United States

The Presumpscot River is a 25.8-mile-long (41.5 km) river located in Cumberland County, Maine, United States. It is the main outlet of Sebago Lake. The river provided an early transportation corridor with reliable water power for industrial development of the city of Westbrook and the village of South Windham.

Oriental Powder Company was a gunpowder manufacturer with mills located on the Presumpscot River in Gorham and Windham, Maine. The company was one of the four largest suppliers to Union forces through the American Civil War.

Milton is a census-designated place (CDP) and the primary village in the town of Milton, Strafford County, New Hampshire, United States. The population of the CDP was 593 at the 2020 census, out of 4,482 in the entire town.

Leatheroid is cellulose material very similar to vulcanized fibre in physical properties and uses. It is prepared using unsized cotton rag paper and mineral acid.

Kennebunk Manufacturing Company

<span class="mw-page-title-main">Newichawannock Canal</span> United States historic place

The Newichawannock Canal is a man-made canal which drains Great East Lake into Horn Pond at the border between Wakefield, New Hampshire, and Acton, Maine, in the northeastern United States. It is at the head of the Salmon Falls River, which the Abenaki called Newichawannock, meaning "river with many falls". Begun in 1850 by the Great Falls Company to increase the water available for its mills in Somersworth, New Hampshire, the 0.75-mile (1.21 km) canal is unusual as it was built for strictly industrial purposes in an area remote from the actual industrial site. The canal forms the boundary between the states of New Hampshire and Maine, and is spanned by a stone bridge built at the same time. The canal and bridge, along with related artifacts, were listed on the National Register of Historic Places in 2014.

Homer Rogers was an American businessman and politician who served on the Boston Board of Aldermen and was the Republican nominee in the 1892 Boston mayoral election.

References

  1. ↑ "North Rochester". Geographic Names Information System . United States Geological Survey, United States Department of the Interior.
  2. ↑ History of Strafford County New Hampshire and Representative Citizens; John Scales, Editor Dover Daily Democrat; Richmond - Arnold Publishing Co.; F. J. Richmond Pres. & C. R. Arnold Sec. and Treas.; Chicago, IL; 1914; pp. 877-878.
  3. ↑ "Fiber and Fabric"; Vol. XXX; No. 755; Aug. 19, 1899; p8.
  4. ↑ Ruth Howland, "Great New Industry –Rochester History". Article provided to J. M. Snyder by Rochester Historical Society; Martha Fowler Letter January 31, 2007
  5. ↑ Inscription Spaulding Mausoleum on the Rockcraft Lodge Estate grounds in East Sebago, ME.
  6. ↑ Florence H. Smith, "Home of Three Governors"; Article provided to J. M. Snyder by Rochester Historical Society; Martha Fowler Letter January 31, 2007
  7. ↑ Photo of Huntley setting corner stone. Historical Society of the Tonawandas
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.