The Panther II is a German tank design of the Second World War based on the design of the original Panther tank. It had slightly thicker armour than the Panther and adopted some standardised components from the Tiger II tank design. [1] The Panther II did not progress beyond prototypes and did not enter production.
The early motivation for improving the Panther tank came from the concern of Adolf Hitler and others who believed that it lacked sufficient armour. Hitler had already insisted on an increase in its armour once, early in the design of the original Panther in 1942. Discussions involving Hitler in January 1943 called for further increased armour; initially referred to as Panther 2, it was known as the Panther II after April 1943.
Following the decision not to commence production, the concepts and ideas were used for the design of the E-50 Standardpanzer project.
This upgrade to the Panther tank increased the thickness of the glacis plate from 80 mm (3.1 in) to 100 mm (3.9 in), the side hull armour from 40 mm (1.6 in) to 60 mm (2.4 in), and decreased the armour on the top hull from 40 mm (1.6 in) to 30 mm (1.2 in). Production of the Panther II was slated to begin in September 1943.
On 10 February 1943, Dr. Wiebecke (chief design engineer for M.A.N.) suggested thoroughly redesigning the Panther II and incorporating Tiger II components such as the steering gear, final drives, the suspension system and turret based on Eastern Front experiences. The total weight would have increased to more than 50 tonnes. [2] Another meeting on 17 February 1943 focused on sharing and standardising parts between the Tiger II and the Panther II, such as the transmission, all-steel 80 centimetre diameter road-wheels that only overlapped (as on the Tiger II) and not interleaved (as the original 'Schachtellaufwerk' road-wheel system used) and running gear.
The Panther II was to be fitted with a new turret, the Turm Panther 2 (German "schmale Blendenausführung" for "narrow aperture variant"). [3]
For a long time, it was assumed that the Schmalturm was designed for the Panther II, but it was designed after the Panther II had been cancelled and was intended for the Panther Ausf. F. [4]
A number of engines were under consideration, among them the new Maybach HL234 fuel-injection engine (900 hp operated by an 8-speed hydraulic[ citation needed ] transmission) and the BMW 003 aviation turbojet-derived, GT 101 turboshaft powerplant, planned to be of 1,150 shaft horsepower output and weighing only 450 kg (992 lb) without its transmission, only 38% of the weight of the Panther's standard Maybach HL230 V-12 gasoline fueled piston engine. The engine would have given the Panther II an increased 200 hp, which would have made it faster than its predecessor, though it was heavier. [5]
Thus, plans to replace the original Panther design with the Panther II were already underway before the first Panther had even seen combat. But from May to June 1943 a final meeting was held at M.A.N where it was decided that production of the Panther II would cease, and work would focus on the Panther I. [6] It is not clear if there was ever an official cancellation – this may have been because the Panther II upgrade pathway was originally started at Hitler's insistence.
The Panther II required five crew members to operate, its turret accommodated three crew members, the commander, gunner, and loader whilst the driver and radio operator sat in the hull, in an arrangement identical to the Panther I.
One prototype hull was completed and captured by US forces. It was taken to Aberdeen Proving Ground, and then later moved to the Patton museum. A Panther Ausf. G turret was placed on the Panther II hull as a placeholder. [7] [8] [9] [5] The Panther II hull was moved to the National Armor and Cavalry Museum at Ft. Moore, GA for display.
The Tiger II was a German heavy tank of the Second World War. The final official German designation was Panzerkampfwagen Tiger Ausf. B, often shortened to Tiger B. The ordnance inventory designation was Sd.Kfz. 182.. It was also known informally as the Königstiger. Contemporaneous Allied soldiers usually called it the King Tiger or Royal Tiger.
The Panzer II is the common name used for a family of German tanks used in World War II. The official German designation was Panzerkampfwagen II.
The Panzerkampfwagen III, commonly known as the Panzer III, was a medium tank developed in the 1930s by Germany, and was used extensively in World War II. The official German ordnance designation was Sd.Kfz. 141. It was intended to fight other armoured fighting vehicles and serve alongside and support the similar Panzer IV, which was originally designed for infantry support.
The Panzerkampfwagen IV, commonly known as the Panzer IV, is a German medium tank developed in the late 1930s and used extensively during the Second World War. Its ordnance inventory designation was Sd.Kfz. 161.
The Panther tank, officially Panzerkampfwagen V Panther with ordnance inventory designation: Sd.Kfz. 171, is a German medium tank of World War II. It was used on the Eastern and Western Fronts from mid-1943 to the end of the war in May 1945.
The Jagdpanther, Sd.Kfz. 173, was a tank destroyer built by Germany during World War II. The Jagdpanther combined the 8.8 cm Pak 43 anti-tank gun, similar to the main gun of the Tiger II, with the armor and suspension of the Panther chassis.
Nazi Germany developed numerous tank designs used in World War II. In addition to domestic designs, Germany also used various captured and foreign-built tanks.
The Entwicklung series, more commonly known as the E-Series, was a late-World War II attempt by Nazi Germany to produce a standardised series of tank designs. There were to be standard designs in five different weight classes from which several specialised variants were to be developed. This intended to reverse the favor of extremely complex tank designs that had resulted in poor production rates and mechanical unreliability.
The Bergepanzerwagen V, often referred to as the "Bergepanther", was an armoured recovery vehicle used by the German Army in WWII. It was a variant of the Panzerkampfwagen V Panther.
The Panzerkampfwagen E-100 (TG-01) was a German super-heavy tank design developed towards the end of World War II. It was the largest of the Entwicklung series of tank designs which was intended to improve German armored vehicle production through standardization on cheaper, simpler to build vehicles. By the end of the war, the chassis of the prototype E-100 had been partially completed; it was shipped to the United Kingdom for trials, but was later scrapped.
This article deals with the tanks serving in the German Army throughout history, such as the World War I tanks of the Imperial German Army, the interwar and World War II tanks of the Nazi German Wehrmacht, the Cold War tanks of the West German and East German Armies, all the way to the present day tanks of the Bundeswehr.
The VK 16.02 Leopard was a planned German light reconnaissance vehicle designed from mid-1941 through to January 1943, with serial production scheduled for April 1943. It was intended to be the replacement of Panzer II Ausf. L "Luchs". The project was canceled in January 1943 before the first prototype was completed as it did not meet the requirements for 1944. A wooden mock up of the Waffenträger variant was produced.
The Tiger I was a German heavy tank of World War II that began operational duty in 1942 in Africa and in the Soviet Union, usually in independent heavy tank battalions. It gave the German Army its first armoured fighting vehicle that mounted the 8.8 cm KwK 36 gun. 1,347 were built between August 1942 and August 1944. After August 1944, production of the Tiger I was phased out in favour of the Tiger II.
The VK 30.01 (P) was the official designation for a heavy tank prototype proposed in Germany. Only two prototype chassis were built. The tank never entered serial production, but was further developed into the VK 45.01 Tiger (P). Porsche called it the Typ (Type) 100.
The VK 45.01 (P), also informally known as Tiger (P) or Porsche Tiger, was a heavy tank prototype designed by Porsche in Germany. With a dual engine gasoline-electric drive that was complex and requiring significant amounts of copper, it lost out to its Henschel competitor on trials, it was not selected for mass production and the Henschel design was produced as the Tiger I. Most of the already produced chassis were rebuilt as Elefant Panzerjager tank destroyers.
The Panzerkampfwagen III/IV was an experimental medium tank project undertaken by Germany during World War II. The tank was designed to use components of both the Panzer III and Panzer IV, in an attempt to integrate the two projects. The project was cancelled with only the blueprints developed, and no units were ever built.
The VK 20 series were the proposed replacements of the Panzer IV and Panzer III tanks with entries by MAN, Krupp and Daimler Benz. It was initially projected to weigh 20 tonnes, but grew to 24 tonnes. By November 1941, the designs almost reached completion but against the professional judgement of Wa Pruef 6, political interference in December 1941 led to all of the designs being dropped. The root of this adverse decision came from encounters with increasing numbers of T-34 and KV-1 tanks. Reichsminister Fritz Todt declared that a new tank, 30 tons in weight should be designed and produced. Oberst Fichtner argued that time would be lost developing this new 30 ton tank, the number produced would be reduced and engineer bridges could not support such a tank. This new tank chosen from the VK 30 series would become the Panther, replacing the VK 20 series. This decision would place the rushed MAN Panther into production as Germany's new standard medium tank, which was plagued with issues never fully addressed especially those caused by MAN's final drive. It would also arrive too late, with Germany's position in a steep decline, having lost the initiative.
The Schmalturm was a tank turret designed for use on the Panther Ausf. F medium tank. There was a Krupp proposal to fit it onto the Panzer IV medium tank as well. It featured a narrow front to maximize protection while minimizing weight. It was both lighter and easier to manufacture than the standard Panther turret. The turret had a stereoscopic rangefinder with lenses on either side of the turret, located in spherical bulges. No Schmalturms entered series production.
The Panzerkampfwagen II Ausf. L "Luchs" is a German light tank from the Second World War, developed between 1940 and 1942 by Daimler-Benz and MAN. The Luchs was the only Panzer II design with the Schachtellaufwerk overlapping/interleaved road wheels and "slack track" configuration to enter series production, with 100 being built from September 1943 to January 1944 in addition to the conversion of the four Ausf. M tanks. Originally given the experimental designation VK 13.03, it was adopted under the alternate name Panzerspähwagen II and given the popular name Luchs. The Luchs was larger than the Panzer II Ausf. G in most dimensions. With a six speed transmission, it could reach a speed of 60 km/h (37 mph) with a range of 260 km (160 mi). The FuG 12 and FuG Spr radios were installed, while 330 rounds of 20 mm and 2,250 rounds of 7.92 mm ammunition were carried.
An unusual one-of-a-kind Panther tank variant generally called the Panther II [...] represents a 1943 German attempt to create a hybrid vehicle that would combine components from early Panther tanks with yet-to-be-built Tiger II heavy tanks.
| Tanks |  | |
|---|---|---|
| Self-propelled artillery | ||
| Assault guns | ||
| Tank destroyers (Panzerjäger, Jagdpanzer) | ||
| Half-tracks | ||
| Armored cars | ||
| Self-propelled anti-aircraft guns |
| |
| Demolition vehicles | ||
| Experimental vehicles, prototypes | ||
| Proposed designs | ||
| Designations | ||