Paraho process

Last updated
Paraho process
Process typeChemical
Industrial sector(s) Chemical industry
oil industry
Feedstock oil shale
Product(s) shale oil
Leading companiesParaho Development Corporation
InventorJohn B. Jones, Jr.
Developer(s)Development Engineering, Inc.

The Paraho process is an above ground retorting technology for shale oil extraction. The name "Paraho" is delivered from the words "para homem", which means in Portuguese "for mankind". [1]

Contents

History

The Paraho process was invented by John B. Jones, Jr., later president of the Paraho Development Corporation, and developed by Development Engineering, Inc., in the late 1960s. [1] [2] Its design was based on a gas combustion retort developed by the United States Bureau of Mines and the earlier Nevada–Texas–Utah Retort. In the late 1940s, these retorts were tested in the Oil Shale Experiment Station at Anvil Points in Rifle, Colorado. [1] In 1971, the Standard Oil of Ohio started to cooperate with Mr. John B. Jones providing financial support for obtaining an oil shale lease at Anvil Points. In May 1972, the lease was approved. [2] Before leasing a track at Anvil Points, a test of using the Paraho Direct process for limestone calcination in cement kilns was carried out. [1]

The consortium for developing the Anvil Points lease – the Paraho Development Corporation – was formed in 1973. [3] In addition to the Standard Oil of Ohio, other participants of the consortium were Atlantic Richfield, Carter Oil, Chevron Research, Cleveland-Cliffs Iron, Gulf Oil, Kerr-McKee, Marathon Oil, Arthur G. McKee, Mobil Research, Phillips Petroleum Company, Shell Development, Southern California Edison, Standard Oil Company (Indiana), Sun Oil, Texaco, and the Webb-Chambers-Gary-McLoraine Group. [2] Shale oil retorting started in 1974 when two operational retorts – pilot plant and semiworks – were put into operation. [3] The semiworks unit achieved a maximum throughput capacity of 290  tons (263 tonnes) of raw oil shale per day. [3] In March 1976, the Paraho Development Corporation tested a modification of its technology – the Paraho Indirect process. [2] The Anvil Points lease was closed in 1978. [1]

In 1976–1978, under the contracts with the United States Navy, Paraho technology was used for production of 100,000 barrels of crude shale oil. It was tested for using as military transportation fuels. [4] [5] [6] The Gary Western Refinery in Fruita, Colorado, refined the Paraho shale oil for production of gasoline, jet fuels, diesel fuel marine, and heavy fuel oil. [7] Paraho JP-4 aviation fuel was tested by the United States Air Force in the T-39 jet aircraft flight, which took a place between the Wright Patterson Air Force Base (Dayton, Ohio) and the Carswell Air Force Base (Fort Worth, Texas). In addition, the Paraho heavy fuel oil was used for fueling a Cleveland-Cliffs Iron ore carrier during its 7-day cruise on Great Lakes. [2] On 13 June 1980, the Department of Energy awarded $4.4 million contract (participants providing additional $3.7 million) for an 18-month study to construct an 18,000 TPD modular demonstration shale oil plant producing 10,000 BPD on a lease 40 miles southeast of Vernal, Utah. [8] The demonstration module was never built.

In 1982, Paraho’s semi-works plant was torn down when the Anvil Points station was decommissioned, but the pilot plant was moved to an adjacent plot of private land.

In 1987, Paraho reorganized as New Paraho and began production of SOMAT asphalt additive used in test strips in 5 States. In 1991, New PARAHO reported successful tests of SOMAT shale oil asphalt additive.

On 28 June 2000, Shale Technologies purchased Paraho Development Corporation and became owner of the proprietary information relating to the Paraho oil shale retorting technologies. [9]

On 14 August 2008, Queensland Energy Resources announced that it will use the Paraho Indirect technology for its Stuart Oil Shale Project. [10]

Technology

The Paraho process can be operated in two different heating modes, which are direct and indirect. [5] The Paraho Direct process evolved from gas combustion retort technology and is classified as an internal combustion method. [1] [11] [12] Accordingly, the Paraho Direct retort is a vertical shaft retort similar to the Kiviter and Fushun retorts, used correspondingly in Estonia and China. [13] However, compared to the earlier gas combustion retorts the Paraho retort's raw oil shale feeding mechanism, gas distributor, and discharge grate have different designs. In the Paraho Direct process, the crushed and screened raw oil shale is fed into the top of the retort through a rotating distributor. The oil shale descends the retort as a moving bed. [1] [14] The oil shale is heated by the rising combustion gases from the lower part of the retort and the kerogen in the shale decomposes at about 500 °C (932 °F) to oil vapour, shale oil gas and spent shale. Heat for pyrolysis comes from the combustion of char in the spent shale. The combustion takes place where air is injected at two levels in the middle of the retort below the pyrolysis section raising the temperature of the shale and the gas to 700 °C (1,292 °F) to 800 °C (1,472 °F). [14] Collecting tubes at the top of the retort carry shale oil mist, evolved gases and combustion gases into the product separation unit, where oil, water and dust are separated from the gases. For combined removal of liquid droplets and particulates, a wet electrostatic precipitator is used. [1] Cleaned gases from the precipitator are compressed in a compressor. Part of the gas from the compressor is recycled to the bottom of the retort to cool the combusted shale (shale ash) and carry the recovered heat back up the retort. Cooled shale ash exits the retort through the discharge grate in the bottom of the retort. After processing, shale ash is disposed of. [1] The liquid oil is separated from produced water and may be further refined into high quality products. The mixture of evolved gases and combustions gases is available for use as a low quality fuel gas for drying or power generation.

The Paraho Indirect is classified as an externally generated hot gas technology . [12] The Paraho Indirect retort configuration is similar to the Paraho Direct except that a part of the gas from the compressor is heated to between 600 °C (1,112 °F) to 800 °C (1,472 °F) in a separate furnace and injected into the retort instead of air. [5] No combustion occurs in the Paraho Indirect retort itself. [1] As a result, the fuel gas from the Paraho Indirect is not diluted with combustion gases and the char remains on the disposed spent shale.

The main advantage of the Paraho process is simplicity in process and design; it has few moving parts and therefore low construction and operating costs compared with more sophisticated technologies. The Paraho retort also consumes no water, which is especially important for oil shale extraction in areas with water scarcity. [2] A disadvantage common to both the Paraho Direct and Paraho Indirect is that neither are able to process oil shale particles smaller than about 12 millimetres (0.5 in). These fines may account for 10 to 30 per cent of the crushed feed.

Operations

See also

Related Research Articles

Viru Keemia Grupp (VKG) is an Estonian holding group of oil shale industry, power generation, and public utility companies.

Petrosix is the world’s largest surface oil shale pyrolysis retort with an 11 metres (36 ft) diameter vertical shaft kiln, operational since 1992. It is located in São Mateus do Sul, Brazil, and it is owned and operated by the Brazil energy company Petrobras. Petrosix means also the Petrosix process, an externally generated hot gas technology of shale oil extraction. The technology is tailored to Irati oil shale formation, a Permian formation of the Paraná Basin.

Oil shale industry

The oil shale industry is an industry of mining and processing of oil shale—a fine-grained sedimentary rock, containing significant amounts of kerogen, from which liquid hydrocarbons can be manufactured. The industry has developed in Brazil, China, Estonia and to some extent in Germany and Russia. Several other countries are currently conducting research on their oil shale reserves and production methods to improve efficiency and recovery. Estonia accounted for about 70% of the world's oil shale production in a study published in 2005.

Shale oil extraction Process for extracting oil from oil shale

Shale oil extraction is an industrial process for unconventional oil production. This process converts kerogen in oil shale into shale oil by pyrolysis, hydrogenation, or thermal dissolution. The resultant shale oil is used as fuel oil or upgraded to meet refinery feedstock specifications by adding hydrogen and removing sulfur and nitrogen impurities.

History of the oil shale industry

The history of the oil shale industry started in ancient times. The modern industrial use of oil shale for oil extraction dates to the mid-19th century and started growing just before World War I because of the mass production of automobiles and trucks and the supposed shortage of gasoline for transportation needs. Between the World Wars oil shale projects were begun in several countries.

Shale Technologies, LLC is an American privately held oil shale company with headquarters in Rifle, Colorado. It is an owner of the proprietary information relating to the Paraho oil shale retorting technologies. The Paraho Direct is an American version of a vertical shaft retort similar to the Kiviter and Fushun retorts. This technology is used in the company's pilot plant facility in Rifle.

The Kiviter process is an above ground retorting technology for shale oil extraction.

The TOSCO II process is an above ground retorting technology for shale oil extraction, which uses fine particles of oil shale that are heated in a rotating kiln. The particularity of this process is that it use hot ceramic balls for the heat transfer between the retort and a heater. The process was tested in a 40 tonnes per hour test facility near Parachute, Colorado.

Galoter process

The Galoter process is a shale oil extraction technology for a production of shale oil, a type of synthetic crude oil. In this process, the oil shale is decomposed into shale oil, oil shale gas, and spent residue. A decomposition is caused by mixing raw oil shale with a hot oil shale ash, generated by combustion of carbonaceous residue (semi-coke) in the spent residue. The process was developed in 1950s and it is used commercially for the shale oil production in Estonia. There are projects for further development of this technology and for expansion of its usage, e.g. in Jordan and USA.

The Alberta Taciuk process is an above-ground dry thermal retorting technology for extracting oil from oil sands, oil shale and other organics-bearing materials, including oil contaminated soils, sludges and wastes. The technology is named after its inventor William Taciuk and the Alberta Oil Sands Technology and Research Authority.

The Fushun process is an above-ground retorting technology for shale oil extraction. It is named after the main production site of Fushun, Liaoning province in northeastern China.

The Lurgi–Ruhrgas process is an above-ground coal liquefaction and shale oil extraction technology. It is classified as a hot recycled solids technology.

The gas combustion retort process was an above-ground retorting technology for shale oil extraction. It was a predecessor of the Paraho and Petrosix processes, and modern directly heated oil shale retorting technologies in general.

The Nevada–Texas–Utah retort process was an above-ground shale oil extraction technology to produce shale oil, a type of synthetic crude oil. It heated oil shale in a sealed vessel (retort) causing its decomposition into shale oil, oil shale gas and spent residue. The process was developed in the 1920s and used for shale oil production in the United States and in Australia. The process was simple to operate; however, it was ceased from the operation because of a small capacity and labor extensiveness.

The Superior multimineral process is an above ground shale oil extraction technology designed for production of shale oil, a type of synthetic crude oil. The process heats oil shale in a sealed horizontal segmented vessel (retort) causing its decomposition into shale oil, oil shale gas and spent residue. The particularities of this process is a recovery of saline minerals from the oil shale, and a doughnut-shape of the retort. The process is suitable for processing of mineral-rich oil shales, such as in the Piceance Basin. It has a relatively high reliability and high oil yield. The technology was developed by the American oil company Superior Oil.

The Union process was an above ground shale oil extraction technology for production of shale oil, a type of synthetic crude oil. The process used a vertical retort where heating causes decomposition of oil shale into shale oil, oil shale gas and spent residue. The particularity of this process is that oil shale in the retort moves from the bottom upward to the top, countercurrent to the descending hot gases, by a mechanism known as a rock pump. The process technology was invented by the American oil company Unocal Corporation in late 1940s and was developed through several decades. The largest oil shale retort ever built was the Union B type retort.

The Chevron STB process is an above-ground shale oil extraction technology. It is classified as a hot recycled solids technology.

KENTORT II is an above-ground shale oil extraction process developed by the Center for Applied Energy Research of the University of Kentucky. It is a hot recycled solids fluidized bed retorting process developed since 1982 for processing the eastern United States Devonian oil shales. The concept of this process was initiated in 1986 in the test unit.

The Shell Spher process is an above ground fluidization bed retorting technology for shale oil extraction. It is classified as a hot recycled solids technology.

The history of the oil shale industry in the United States goes back to the 1850s; it dates back farther as a major enterprise than the petroleum industry. But although the United States contains the world's largest known resource of oil shale, the US has not been a significant producer of shale oil since 1861. There were three major past attempts to establish an American oil shale industry: the 1850s; in the years during and after World War I; and in the 1970s and early 1980s. Each time, the oil shale industry failed because of competition from cheaper petroleum.

References

  1. 1 2 3 4 5 6 7 8 9 10 United States Office of Technology Assessment (June 1980). An Assessment of Oil Shale Technologies (PDF). DIANE Publishing. pp. 110, 140–144, 271. ISBN   978-1-4289-2463-5. NTIS order #PB80-210115. Retrieved 2009-05-24.
  2. 1 2 3 4 5 6 Harry Pforzheimer (August 1976). "Paraho Oil Shale Project" (PDF). United States Department of Energy: 12–16. Retrieved 2009-05-24.Cite journal requires |journal= (help)
  3. 1 2 3 "Paraho Process". Queensland Energy Resources . Retrieved 2009-05-24.
  4. "Oil Shale" (PDF). The Energy and Minerals Field Institute, Colorado School of Mines. 2008: 4. Retrieved 2009-05-24.Cite journal requires |journal= (help)
  5. 1 2 3 Johnson, Harry R.; Crawford, Peter M.; Bunger, James W. (2004). "Strategic significance of America's oil shale resource. Volume II: Oil shale resources, technology and economics" (PDF). Office of Deputy Assistant Secretary for Petroleum Reserves; Office of Naval Petroleum and Oil Shale Reserves; United States Department of Energy: 13, A-2, B-4. Retrieved 2009-05-24.Cite journal requires |journal= (help)
  6. Wasilk, N.J.; Robinson, E.T. (1980). The Commercial Scale Refining of Paraho Crude Shale Oil Into Military Specification Fuels (PDF). Symposium on Oil Shale, Tar Sands. Los Angeles: Division of Fuel Chemistry, American Chemical Society. p. 12. Retrieved 2009-06-02.
  7. Andrews, Anthony (2006-04-13). "Oil Shale: History, Incentives, and Policy" (PDF). Congressional Research Service: 9. RL33359. Retrieved 2009-05-24.Cite journal requires |journal= (help)
  8. The Engineering Societies Commission on Energy, Inc. (March 1981). "Synthetic Fuels Summary. Report No. FE-2468-82" (PDF). United States Department of Energy: 83. Archived from the original (PDF) on 2011-07-16. Retrieved 2009-07-17.Cite journal requires |journal= (help)
  9. "Regent Energy Corporation, Form 10QSB, Filing Date Feb 14, 2001". secdatabase.com. Retrieved May 14, 2018.
  10. Rick Wilkinson (2008-08-14). "Queensland oil shale project still in the wings". Oil and Gas Journal. Retrieved 2009-05-24.
  11. Assembly of Engineering (1980). Refining synthetic liquids from coal and shale: final report of the Panel on R&D Needs in Refining of Coal and Shale Liquids. National Academy Press. p. 84. ISBN   978-0-309-03129-5 . Retrieved 2009-05-24.
  12. 1 2 Burnham, Alan K.; McConaghy, James R. (2006-10-16). Comparison of the acceptability of various oil shale processes (PDF). 26th Oil shale symposium. Golden: Lawrence Livermore National Laboratory. p. 17. UCRL-CONF-226717. Archived from the original (PDF) on 2016-02-13. Retrieved 2007-05-27.
  13. Committee on Production Technologies for Liquid Transportation Fuels, Energy Engineering Board, National Research Council (1990). Fuels to drive our future. National Academies Press. p. 183. ISBN   978-0-309-08645-5 . Retrieved 2009-05-24.CS1 maint: multiple names: authors list (link)
  14. 1 2 Lee, Sunggyu (1991). Oil Shale Technology. CRC Press. pp. 119–120. ISBN   978-0-8493-4615-6 . Retrieved 2008-05-11.