Pencil (geometry)

Last updated
Some lines in the pencil through A Lines.svg
Some lines in the pencil through A

In geometry, a pencil is a family of geometric objects with a common property, for example the set of lines that pass through a given point in a plane, or the set of circles that pass through two given points in a plane.

Contents

Although the definition of a pencil is rather vague, the common characteristic is that the pencil is completely determined by any two of its members. Analogously, a set of geometric objects that are determined by any three of its members is called a bundle. [1] Thus, the set of all lines through a point in three-space is a bundle of lines, any two of which determine a pencil of lines. To emphasize the two-dimensional nature of such a pencil, it is sometimes referred to as a flat pencil. [2]

Any geometric object can be used in a pencil. The common ones are lines, planes, circles, conics, spheres, and general curves. Even points can be used. A pencil of points is the set of all points on a given line. [1] A more common term for this set is a range of points.

Pencil of lines

In a plane, let u and v be two distinct intersecting lines. For concreteness, suppose that u has the equation, aX + bY + c = 0 and v has the equation a'X + b'Y + c′ = 0. Then

λu + μv = 0,

represents, for suitable scalars λ and μ, any line passing through the intersection of u = 0 and v = 0. This set of lines passing through a common point is called a pencil of lines. [3] The common point of a pencil of lines is called the vertex of the pencil.

In an affine plane with the reflexive variant of parallelism, a set of parallel lines forms an equivalence class called a pencil of parallel lines. [4] This terminology is consistent with the above definition since in the unique projective extension of the affine plane to a projective plane a single point (point at infinity) is added to each line in the pencil of parallel lines, thus making it a pencil in the above sense in the projective plane.

Pencil of planes

Four planes from the axial pencil on P1 P2 Haz de planos.png
Four planes from the axial pencil on P1 P2

A pencil of planes, is the set of planes through a given straight line in three-space, called the axis of the pencil. The pencil is sometimes referred to as a axial-pencil [5] or fan of planes or a sheaf of planes . [6] For example, the meridians of the globe are defined by the pencil of planes on the axis of Earth's rotation.

Two intersecting planes meet in a line in three-space, and so, determine the axis and hence all of the planes in the pencil.

The four-space of quaternions can be seen as an axial pencil of complex planes all sharing the same real line. In fact, quaternions contain a sphere of imaginary units, and a pair of antipodal points on this sphere, together with the real axis, generate a complex plane. The union of all these complex planes constitutes the 4-algebra of quaternions.

Pencil of circles

The Apollonian circles, two orthogonal pencils of circles Apollonian circles.svg
The Apollonian circles, two orthogonal pencils of circles

Any two circles in the plane have a common radical axis, which is the line consisting of all the points that have the same power with respect to the two circles. A pencil of circles (or coaxial system) is the set of all circles in the plane with the same radical axis. [7] To be inclusive, concentric circles are said to have the line at infinity as a radical axis.

There are five types of pencils of circles, [8] the two families of Apollonian circles in the illustration above represent two of them. Each type is determined by two circles called the generators of the pencil. When described algebraically, it is possible that the equations may admit imaginary solutions. The types are:

Properties

A circle that is orthogonal to two fixed circles is orthogonal to every circle in the pencil they determine. [11]

The circles orthogonal to two fixed circles form a pencil of circles. [11]

Two circles determine two pencils, the unique pencil that contains them and the pencil of circles orthogonal to them. The radical axis of one pencil consists of the centers of the circles of the other pencil. If one pencil is of elliptic type, the other is of hyperbolic type and vice versa. [11]

The radical axis of any pencil of circles, interpreted as an infinite-radius circle, belongs to the pencil. Any three circles belong to a common pencil whenever all three pairs share the same radical axis and their centers are collinear.

Projective space of circles

There is a natural correspondence between circles in the plane and points in three-dimensional projective space; a line in this space corresponds to a one-dimensional continuous family of circles, hence a pencil of points in this space is a pencil of circles in the plane.

Specifically, the equation of a circle of radius r centered at a point (p,q),

may be rewritten as

where α = 1, β = p, γ = q, and δ = p2 + q2  r2. In this form, multiplying the quadruple (α,β,γ,δ) by a scalar produces a different quadruple that represents the same circle; thus, these quadruples may be considered to be homogeneous coordinates for the space of circles. [12] Straight lines may also be represented with an equation of this type in which α = 0 and should be thought of as being a degenerate form of a circle. When α  0, we may solve for p = β/α, q = γ/α, and r =√(p2 + q2  δ/α); the latter formula may give r = 0 (in which case the circle degenerates to a point) or r equal to an imaginary number (in which case the quadruple (α,β,γ,δ) is said to represent an imaginary circle).

The set of affine combinations of two circles (α1111), (α2222), that is, the set of circles represented by the quadruple

for some value of the parameter z, forms a pencil; the two circles being the generators of the pencil.

Cardioid as envelope of a pencil of circles

cardioid as envelope of a pencil of circles Kardioide-kreise.svg
cardioid as envelope of a pencil of circles

Another type of pencil of circles can be obtained as follows. Consider a given circle (called the generator circle) and a distinguished point P on the generator circle. The set of all circles that pass through P and have their centers on the generator circle form a pencil of circles. The envelope of this pencil is a cardioid.

Pencil of spheres

A sphere is uniquely determined by four points that are not coplanar. More generally, a sphere is uniquely determined by four conditions such as passing through a point, being tangent to a plane, etc. [13] This property is analogous to the property that three non-collinear points determine a unique circle in a plane.

Consequently, a sphere is uniquely determined by (that is, passes through) a circle and a point not in the plane of that circle.

By examining the common solutions of the equations of two spheres, it can be seen that two spheres intersect in a circle and the plane containing that circle is called the radical plane of the intersecting spheres. [14] Although the radical plane is a real plane, the circle may be imaginary (the spheres have no real point in common) or consist of a single point (the spheres are tangent at that point). [15]

If f(x, y, z) = 0 and g(x, y, z) = 0 are the equations of two distinct spheres then

is also the equation of a sphere for arbitrary values of the parameters λ and μ. The set of all spheres satisfying this equation is called a pencil of spheres determined by the original two spheres. In this definition a sphere is allowed to be a plane (infinite radius, center at infinity) and if both the original spheres are planes then all the spheres of the pencil are planes, otherwise there is only one plane (the radical plane) in the pencil. [16]

If the pencil of spheres does not consist of all planes, then there are three types of pencils: [15]

All the tangent lines from a fixed point of the radical plane to the spheres of a pencil have the same length. [15]

The radical plane is the locus of the centers of all the spheres that are orthogonal to all the spheres in a pencil. Moreover, a sphere orthogonal to any two spheres of a pencil of spheres is orthogonal to all of them and its center lies in the radical plane of the pencil. [15]

Pencil of conics

A (non-degenerate) conic is completely determined by five points in general position (no three collinear) in a plane and the system of conics which pass through a fixed set of four points (again in a plane and no three collinear) is called a pencil of conics. [17] The four common points are called the base points of the pencil. Through any point other than a base point, there passes a single conic of the pencil. This concept generalizes a pencil of circles.

In a projective plane defined over an algebraically closed field any two conics meet in four points (counted with multiplicity) and so, determine the pencil of conics based on these four points. Furthermore, the four base points determine three line pairs (degenerate conics through the base points, each line of the pair containing exactly two base points) and so each pencil of conics will contain at most three degenerate conics. [18]

A pencil of conics can be represented algebraically in the following way. Let C1 and C2 be two distinct conics in a projective plane defined over an algebraically closed field K. For every pair λ, μ of elements of K, not both zero, the expression:

represents a conic in the pencil determined by C1 and C2. This symbolic representation can be made concrete with a slight abuse of notation (using the same notation to denote the object as well as the equation defining the object.) Thinking of C1, say, as a ternary quadratic form, then C1 = 0 is the equation of the "conic C1". Another concrete realization would be obtained by thinking of C1 as the 3×3 symmetric matrix which represents it. If C1 and C2 have such concrete realizations then every member of the above pencil will as well. Since the setting uses homogeneous coordinates in a projective plane, two concrete representations (either equations or matrices) give the same conic if they differ by a non-zero multiplicative constant.

Pencil of plane curves

More generally, a pencil is the special case of a linear system of divisors in which the parameter space is a projective line. Typical pencils of curves in the projective plane, for example, are written as

where C = 0, C′ = 0 are plane curves.

History

Desargues is credited with inventing the term "pencil of lines" (ordonnance de lignes). [19]

An early author of modern projective geometry G. B. Halsted introduced the terms copunctal and flat-pencil to define angle: "Straights with the same cross are copunctal." Also "The aggregate of all coplanar, copunctal straights is called a flat-pencil" and "A piece of a flat-pencil bounded by two of the straights as sides, is called an angle." [20]

See also

Notes

  1. 1 2 Young 1971 , p. 40
  2. Halsted 1906 , p. 9
  3. Pedoe 1988 , p. 106
  4. Artin 1957 , p. 53
  5. Halsted 1906 , p. 9
  6. Woods 1961 , p. 12
  7. Johnson 2007 , p. 34
  8. Some authors combine types and reduce the list to three. Schwerdtfeger (1979 , pp. 8–10)
  9. Johnson 2007 , p. 36
  10. Schwerdtfeger 1979 , pp. 8–10
  11. 1 2 3 Johnson 2007 , p. 37
  12. Pfeifer & Van Hook 1993.
  13. Albert 2016 , p. 55.
  14. Albert 2016 , p. 57.
  15. 1 2 3 4 Woods 1961 , p. 267.
  16. Woods 1961 , p. 266
  17. Faulkner 1952 , pg. 64.
  18. Samuel 1988 , pg. 50.
  19. Earliest Known Uses of Some Words of Mathematics , retrieved July 14, 2020
  20. Halsted 1906 , p. 9

Related Research Articles

<span class="mw-page-title-main">Hyperbola</span> Plane curve: conic section

In mathematics, a hyperbola is a type of smooth curve lying in a plane, defined by its geometric properties or by equations for which it is the solution set. A hyperbola has two pieces, called connected components or branches, that are mirror images of each other and resemble two infinite bows. The hyperbola is one of the three kinds of conic section, formed by the intersection of a plane and a double cone. If the plane intersects both halves of the double cone but does not pass through the apex of the cones, then the conic is a hyperbola.

<span class="mw-page-title-main">Parabola</span> Plane curve: conic section

In mathematics, a parabola is a plane curve which is mirror-symmetrical and is approximately U-shaped. It fits several superficially different mathematical descriptions, which can all be proved to define exactly the same curves.

<span class="mw-page-title-main">Sphere</span> A set of points in space which are equidistant from the center

A sphere is a geometrical object that is a three-dimensional analogue to a two-dimensional circle. Formally, a sphere is the set of points that are all at the same distance r from a given point in three-dimensional space. That given point is the centre of the sphere, and r is the sphere's radius. The earliest known mentions of spheres appear in the work of the ancient Greek mathematicians.

In mathematics, the matrix representation of conic sections permits the tools of linear algebra to be used in the study of conic sections. It provides easy ways to calculate a conic section's axis, vertices, tangents and the pole and polar relationship between points and lines of the plane determined by the conic. The technique does not require putting the equation of a conic section into a standard form, thus making it easier to investigate those conic sections whose axes are not parallel to the coordinate system.

In geometry, inversive geometry is the study of inversion, a transformation of the Euclidean plane that maps circles or lines to other circles or lines and that preserves the angles between crossing curves. Many difficult problems in geometry become much more tractable when an inversion is applied. Inversion seems to have been discovered by a number of people contemporaneously, including Steiner (1824), Quetelet (1825), Bellavitis (1836), Stubbs and Ingram (1842-3) and Kelvin (1845).

In geometry, a degenerate conic is a conic that fails to be an irreducible curve. This means that the defining equation is factorable over the complex numbers as the product of two linear polynomials.

<span class="mw-page-title-main">Cylinder</span> Three-dimensional solid

A cylinder has traditionally been a three-dimensional solid, one of the most basic of curvilinear geometric shapes. In elementary geometry, it is considered a prism with a circle as its base.

<span class="mw-page-title-main">Radical axis</span> All points whose relative distances to two circles are equal

In Euclidean geometry, the radical axis of two non-concentric circles is the set of points whose power with respect to the circles are equal. For this reason the radical axis is also called the power line or power bisector of the two circles. In detail:

<span class="mw-page-title-main">Problem of Apollonius</span> Construct circles that are tangent to three given circles in a plane

In Euclidean plane geometry, Apollonius's problem is to construct circles that are tangent to three given circles in a plane (Figure 1). Apollonius of Perga posed and solved this famous problem in his work Ἐπαφαί ; this work has been lost, but a 4th-century AD report of his results by Pappus of Alexandria has survived. Three given circles generically have eight different circles that are tangent to them (Figure 2), a pair of solutions for each way to divide the three given circles in two subsets.

<span class="mw-page-title-main">Apollonian circles</span> Circles in two perpendicular families

In geometry, Apollonian circles are two families (pencils) of circles such that every circle in the first family intersects every circle in the second family orthogonally, and vice versa. These circles form the basis for bipolar coordinates. They were discovered by Apollonius of Perga, a renowned Greek geometer.

<span class="mw-page-title-main">Homothetic center</span> Concept in geometry

In geometry, a homothetic center is a point from which at least two geometrically similar figures can be seen as a dilation or contraction of one another. If the center is external, the two figures are directly similar to one another; their angles have the same rotational sense. If the center is internal, the two figures are scaled mirror images of one another; their angles have the opposite sense.

In algebraic geometry, the conic sections in the projective plane form a linear system of dimension five, as one sees by counting the constants in the degree two equations. The condition to pass through a given point P imposes a single linear condition, so that conics C through P form a linear system of dimension 4. Other types of condition that are of interest include tangency to a given line L.

<span class="mw-page-title-main">Lie sphere geometry</span> Geometry founded on spheres

Lie sphere geometry is a geometrical theory of planar or spatial geometry in which the fundamental concept is the circle or sphere. It was introduced by Sophus Lie in the nineteenth century. The main idea which leads to Lie sphere geometry is that lines should be regarded as circles of infinite radius and that points in the plane should be regarded as circles of zero radius.

In mathematics, a Benz plane is a type of 2-dimensional geometrical structure, named after the German mathematician Walter Benz. The term was applied to a group of objects that arise from a common axiomatization of certain structures and split into three families, which were introduced separately: Möbius planes, Laguerre planes, and Minkowski planes.

<span class="mw-page-title-main">Circle of antisimilitude</span>

In inversive geometry, the circle of antisimilitude of two circles, α and β, is a reference circle for which α and β are inverses of each other. If α and β are non-intersecting or tangent, a single circle of antisimilitude exists; if α and β intersect at two points, there are two circles of antisimilitude. When α and β are congruent, the circle of antisimilitude degenerates to a line of symmetry through which α and β are reflections of each other.

<span class="mw-page-title-main">Conic section</span> Curve from a cone intersecting a plane

A conic section, conic or a quadratic curve is a curve obtained from a cone's surface intersecting a plane. The three types of conic section are the hyperbola, the parabola, and the ellipse; the circle is a special case of the ellipse, though it was sometimes called as a fourth type. The ancient Greek mathematicians studied conic sections, culminating around 200 BC with Apollonius of Perga's systematic work on their properties.

In Euclidean plane geometry, a tangent line to a circle is a line that touches the circle at exactly one point, never entering the circle's interior. Tangent lines to circles form the subject of several theorems, and play an important role in many geometrical constructions and proofs. Since the tangent line to a circle at a point P is perpendicular to the radius to that point, theorems involving tangent lines often involve radial lines and orthogonal circles.

<span class="mw-page-title-main">Intersection (geometry)</span> Shape formed from points common to other shapes

In geometry, an intersection is a point, line, or curve common to two or more objects. The simplest case in Euclidean geometry is the line–line intersection between two distinct lines, which either is one point or does not exist. Other types of geometric intersection include:

<span class="mw-page-title-main">Confocal conic sections</span> Conic sections with the same foci

In geometry, two conic sections are called confocal if they have the same foci.

<span class="mw-page-title-main">Dupin's theorem</span>

In differential geometry Dupin's theorem, named after the French mathematician Charles Dupin, is the statement:

References