Resolved sideband cooling is a laser cooling technique allowing cooling of tightly bound atoms and ions beyond the Doppler cooling limit, potentially to their motional ground state. Aside from the curiosity of having a particle at zero point energy, such preparation of a particle in a definite state with high probability (initialization) is an essential part of state manipulation experiments in quantum optics and quantum computing.
As of the writing of this article, the scheme behind what we refer to as resolved sideband cooling today is attributed [1] [2] to D. J. Wineland and H. Dehmelt, in their article ‘‘Proposed laser fluorescence spectroscopy on Tl+
mono-ion oscillator III (sideband cooling).’’ [3] The clarification is important as at the time of the latter article, the term also designated what we call today Doppler cooling, [2] which was experimentally realized with atomic ion clouds in 1978 by W. Neuhauser [4] and independently by D. J. Wineland. [5] An experiment that demonstrates resolved sideband cooling unequivocally in its contemporary meaning is that of Diedrich et al. [6] Similarly unequivocal realization with non-Rydberg neutral atoms was demonstrated in 1998 by S. E. Hamann et al. [7] via Raman cooling.
Resolved sideband cooling is a laser cooling technique that can be used to cool strongly trapped atoms to the quantum ground state of their motion. The atoms are usually precooled using the Doppler laser cooling. Subsequently, the resolved sideband cooling is used to cool the atoms beyond the Doppler cooling limit.
A cold trapped atom can be treated to a good approximation as a quantum mechanical harmonic oscillator. If the spontaneous decay rate is much smaller than the vibrational frequency of the atom in the trap, the energy levels of the system will be an evenly spaced frequency ladder, with adjacent levels spaced by an energy . Each level is denoted by a motional quantum number n, which describes the amount of motional energy present at that level. These motional quanta can be understood in the same way as for the quantum harmonic oscillator. A ladder of levels will be available for each internal state of the atom. For example, in the figure at right both the ground (g) and excited (e) states have their own ladder of vibrational levels.
Suppose a two-level atom whose ground state is denoted by g and excited state by e. Efficient laser cooling occurs when the frequency of the laser beam is tuned to the red sideband i.e.
,
where is the internal atomic transition frequency corresponding to at transition between g and e and is the harmonic oscillation frequency of the atom. In this case the atom undergoes the transition
,
where represents the state of an ion whose internal atomic state is a and the motional state is m.
If the recoil energy of the atom is negligible compared with the vibrational quantum energy, subsequent spontaneous emission occurs predominantly at the carrier frequency. This means that the vibrational quantum number remains constant. This transition is
The overall effect of one of these cycles is to reduce the vibrational quantum number of the atom by one. To cool to the ground state, this cycle is repeated many times until is reached with a high probability. [8]
The core process that provides the cooling assumes a two level system that is well localized compared to the wavelength () of the transition (Lamb-Dicke regime), such as a trapped and sufficiently cooled ion or atom. Modeling the system as a harmonic oscillator interacting with a classical monochromatic electromagnetic field [2] yields (in the rotating wave approximation) the Hamiltonian
with
and where
is the number operator
is the frequency spacing of the oscillator
is the Rabi frequency due to the atom-light interaction
is the laser detuning from
is the laser wave vector
That is, incidentally, the Jaynes-Cummings Hamiltonian used to describe the phenomenon of an atom coupled to a cavity in cavity QED. [9] The absorption(emission) of photons by the atom is then governed by the off-diagonal elements, with probability of a transition between vibrational states proportional to , and for each there is a manifold, , coupled to its neighbors with strength proportional to . Three such manifolds are shown in the picture.
If the transition linewidth satisfies , a sufficiently narrow laser can be tuned to a red sideband, . For an atom starting at , the predominantly probable transition will be to . This process is depicted by arrow "1" in the picture. In the Lamb-Dicke regime, the spontaneously emitted photon (depicted by arrow "2") will be, on average, at frequency , [6] and the net effect of such a cycle, on average, will be the removing of motional quanta. After some cycles, the average phonon number is , where is the ratio of the intensities of the red to blue −th sidebands. [10] In practice, this process is normally done on the first motional sideband for optimal efficiency. Repeating the processes many times while ensuring that spontaneous emission occurs provides cooling to . [2] [9] More rigorous mathematical treatment is given in Turchette et al. [10] and Wineland et al. [9] Specific treatment of cooling multiple ions can be found in Morigi et al. [11]
For resolved sideband cooling to be effective, the process needs to start at sufficiently low . To that end, the particle is usually first cooled to the Doppler limit, then some sideband cooling cycles are applied, and finally, a measurement is taken or state manipulation is carried out. A more or less direct application of this scheme was demonstrated by Diedrich et al. [6] with the caveat that the narrow quadrupole transition used for cooling connects the ground state to a long-lived state, and the latter had to be pumped out to achieve optimal cooling efficiency. It is not uncommon, however, that additional steps are needed in the process, due to the atomic structure of the cooled species. Examples of that are the cooling of Ca+
ions and the Raman sideband cooling of Cs atoms.
The energy levels relevant to the cooling scheme for Ca+
ions are the S1/2, P1/2, P3/2, D3/2, and D5/2, which are additionally split by a static magnetic field to their Zeeman manifolds. Doppler cooling is applied on the dipole S1/2 - P1/2 transition (397 nm), however, there is about 6% probability of spontaneous decay to the long-lived D3/2 state, so that state is simultaneously pumped out (at 866 nm) to improve Doppler cooling. Sideband cooling is performed on the narrow quadrupole transition S1/2 - D5/2 (729 nm), however, the long-lived D5/2 state needs to be pumped out to the short lived P3/2 state (at 854 nm) to recycle the ion to the ground S1/2 state and maintain cooling performance. One possible implementation was carried out by Leibfried et al. [12] and a similar one is detailed by Roos. [13] For each data point in the 729 nm absorption spectrum, a few hundred iterations of the following are executed:
Variations of this scheme relaxing the requirements or improving the results are being investigated/used by several ion-trapping groups.
A Raman transition replaces the one-photon transition used in the sideband above by a two-photon process via a virtual level. In the Cs cooling experiment carried out by Hamann et al., [7] trapping is provided by an isotropic optical lattice in a magnetic field, which also provides Raman coupling to the red sideband of the Zeeman manifolds. The process followed in [7] is:
Spontaneous emission is the process in which a quantum mechanical system transits from an excited energy state to a lower energy state and emits a quantized amount of energy in the form of a photon. Spontaneous emission is ultimately responsible for most of the light we see all around us; it is so ubiquitous that there are many names given to what is essentially the same process. If atoms are excited by some means other than heating, the spontaneous emission is called luminescence. For example, fireflies are luminescent. And there are different forms of luminescence depending on how excited atoms are produced. If the excitation is effected by the absorption of radiation the spontaneous emission is called fluorescence. Sometimes molecules have a metastable level and continue to fluoresce long after the exciting radiation is turned off; this is called phosphorescence. Figurines that glow in the dark are phosphorescent. Lasers start via spontaneous emission, then during continuous operation work by stimulated emission.
The quantum harmonic oscillator is the quantum-mechanical analog of the classical harmonic oscillator. Because an arbitrary smooth potential can usually be approximated as a harmonic potential at the vicinity of a stable equilibrium point, it is one of the most important model systems in quantum mechanics. Furthermore, it is one of the few quantum-mechanical systems for which an exact, analytical solution is known.
In particle physics, bremsstrahlung is electromagnetic radiation produced by the deceleration of a charged particle when deflected by another charged particle, typically an electron by an atomic nucleus. The moving particle loses kinetic energy, which is converted into radiation, thus satisfying the law of conservation of energy. The term is also used to refer to the process of producing the radiation. Bremsstrahlung has a continuous spectrum, which becomes more intense and whose peak intensity shifts toward higher frequencies as the change of the energy of the decelerated particles increases.
Laser cooling includes several techniques where atoms, molecules, and small mechanical systems are cooled with laser light. The directed energy of lasers is often associated with heating materials, e.g. laser cutting, so it can be counterintuitive that laser cooling often results in sample temperatures approaching absolute zero. It is a routine step in many atomic physics experiments where the laser-cooled atoms are then subsequently manipulated and measured, or in technologies, such as atom-based quantum computing architectures. Laser cooling relies on the change in momentum when an object, such as an atom, absorbs and re-emits a photon. For example, if laser light illuminates a warm cloud of atoms from all directions and the laser's frequency is tuned below an atomic resonance, the atoms will be cooled. This common type of laser cooling relies on the Doppler effect where individual atoms will preferentially absorb laser light from the direction opposite to the atom's motion. The absorbed light is re-emitted by the atom in a random direction. After repeated emission and absorption of light the net effect on the cloud of atoms is that they will expand more slowly. The slower expansion reflects a decrease in the velocity distribution of the atoms, which corresponds to a lower temperature and therefore the atoms have been cooled. For an ensemble of particles, their thermodynamic temperature is proportional to the variance in their velocity, therefore the lower the distribution of velocities, the lower temperature of the particles.
Electromagnetically induced transparency (EIT) is a coherent optical nonlinearity which renders a medium transparent within a narrow spectral range around an absorption line. Extreme dispersion is also created within this transparency "window" which leads to "slow light", described below. It is in essence a quantum interference effect that permits the propagation of light through an otherwise opaque atomic medium.
A trapped-ion quantum computer is one proposed approach to a large-scale quantum computer. Ions, or charged atomic particles, can be confined and suspended in free space using electromagnetic fields. Qubits are stored in stable electronic states of each ion, and quantum information can be transferred through the collective quantized motion of the ions in a shared trap. Lasers are applied to induce coupling between the qubit states or coupling between the internal qubit states and the external motional states.
In atomic, molecular, and optical physics, the Einstein coefficients are quantities describing the probability of absorption or emission of a photon by an atom or molecule. The Einstein A coefficients are related to the rate of spontaneous emission of light, and the Einstein B coefficients are related to the absorption and stimulated emission of light. Throughout this article, "light" refers to any electromagnetic radiation, not necessarily in the visible spectrum.
Quantum noise is noise arising from the indeterminate state of matter in accordance with fundamental principles of quantum mechanics, specifically the uncertainty principle and via zero-point energy fluctuations. Quantum noise is due to the apparently discrete nature of the small quantum constituents such as electrons, as well as the discrete nature of quantum effects, such as photocurrents.
Doppler cooling is a mechanism that can be used to trap and slow the motion of atoms to cool a substance. The term is sometimes used synonymously with laser cooling, though laser cooling includes other techniques.
In atomic, molecular, and optical physics, a magneto-optical trap (MOT) is an apparatus which uses laser cooling and a spatially-varying magnetic field to create a trap which can produce samples of cold, neutral atoms. Temperatures achieved in a MOT can be as low as several microkelvin, depending on the atomic species, which is two or three times below the photon recoil limit. However, for atoms with an unresolved hyperfine structure, such as 7Li, the temperature achieved in a MOT will be higher than the Doppler cooling limit.
The Jaynes–Cummings model is a theoretical model in quantum optics. It describes the system of a two-level atom interacting with a quantized mode of an optical cavity, with or without the presence of light. It was originally developed to study the interaction of atoms with the quantized electromagnetic field in order to investigate the phenomena of spontaneous emission and absorption of photons in a cavity.
In spectroscopy, the Autler–Townes effect, is a dynamical Stark effect corresponding to the case when an oscillating electric field is tuned in resonance to the transition frequency of a given spectral line, and resulting in a change of the shape of the absorption/emission spectra of that spectral line. The AC Stark effect was discovered in 1955 by American physicists Stanley Autler and Charles Townes.
In physics, quantum beats are simple examples of phenomena that cannot be described by semiclassical theory, but can be described by fully quantized calculation, especially quantum electrodynamics. In semiclassical theory (SCT), there is an interference or beat note term for both V-type and -type atoms. However, in the quantum electrodynamic (QED) calculation, V-type atoms have a beat term but -types do not. This is strong evidence in support of quantum electrodynamics.
In atomic physics, Raman cooling is a sub-recoil cooling technique that allows the cooling of atoms using optical methods below the limitations of Doppler cooling, Doppler cooling being limited by the recoil energy of a photon given to an atom. This scheme can be performed in simple optical molasses or in molasses where an optical lattice has been superimposed, which are called respectively free space Raman cooling and Raman sideband cooling. Both techniques make use of Raman scattering of laser light by the atoms.
Circuit quantum electrodynamics provides a means of studying the fundamental interaction between light and matter. As in the field of cavity quantum electrodynamics, a single photon within a single mode cavity coherently couples to a quantum object (atom). In contrast to cavity QED, the photon is stored in a one-dimensional on-chip resonator and the quantum object is no natural atom but an artificial one. These artificial atoms usually are mesoscopic devices which exhibit an atom-like energy spectrum. The field of circuit QED is a prominent example for quantum information processing and a promising candidate for future quantum computation.
In ion trapping and atomic physics experiments, the Lamb Dicke regime is a quantum regime in which the coupling between an ion or atom's internal qubit states and its motional states is sufficiently small so that transitions that change the motional quantum number by more than one are strongly suppressed.
Ramsey interferometry, also known as the separated oscillating fields method, is a form of particle interferometry that uses the phenomenon of magnetic resonance to measure transition frequencies of particles. It was developed in 1949 by Norman Ramsey, who built upon the ideas of his mentor, Isidor Isaac Rabi, who initially developed a technique for measuring particle transition frequencies. Ramsey's method is used today in atomic clocks and in the SI definition of the second. Most precision atomic measurements, such as modern atom interferometers and quantum logic gates, have a Ramsey-type configuration. A more modern method, known as Ramsey–Bordé interferometry uses a Ramsey configuration and was developed by French physicist Christian Bordé and is known as the Ramsey–Bordé interferometer. Bordé's main idea was to use atomic recoil to create a beam splitter of different geometries for an atom-wave. The Ramsey–Bordé interferometer specifically uses two pairs of counter-propagating interaction waves, and another method named the "photon-echo" uses two co-propagating pairs of interaction waves.
Gray molasses is a method of sub-Doppler laser cooling of atoms. It employs principles from Sisyphus cooling in conjunction with a so-called "dark" state whose transition to the excited state is not addressed by the resonant lasers. Ultracold atomic physics experiments on atomic species with poorly-resolved hyperfine structure, like isotopes of lithium and potassium, often utilize gray molasses instead of Sisyphus cooling as a secondary cooling stage after the ubiquitous magneto-optical trap (MOT) to achieve temperatures below the Doppler limit. Unlike a MOT, which combines a molasses force with a confining force, a gray molasses can only slow but not trap atoms; hence, its efficacy as a cooling mechanism lasts only milliseconds before further cooling and trapping stages must be employed.
In quantum computing, Mølmer–Sørensen gate scheme refers to an implementation procedure for various multi-qubit quantum logic gates used mostly in trapped ion quantum computing. This procedure is based on the original proposition by Klaus Mølmer and Anders Sørensen in 1999-2000.
Quantum logic spectroscopy (QLS) is an ion control scheme that maps quantum information between two co-trapped ion species. Quantum logic operations allow desirable properties of each ion species to be utilized simultaneously. This enables work with ions and molecular ions that have complex internal energy level structures which preclude laser cooling and direct manipulation of state. QLS was first demonstrated by NIST in 2005. QLS was first applied to state detection in diatomic molecules in 2016 by Wolf et al, and later applied to state manipulation and detection of diatomic molecules by the Liebfried group at NIST in 2017