Chemical laser

Last updated

A chemical laser is a laser that obtains its energy from a chemical reaction. Chemical lasers can reach continuous wave output with power reaching to megawatt levels. They are used in industry for cutting and drilling.

Contents

Common examples of chemical lasers are the chemical oxygen iodine laser (COIL), all gas-phase iodine laser (AGIL), and the hydrogen fluoride (HF) and deuterium fluoride (DF) lasers, all operating in the mid-infrared region. There is also a DF–CO2 laser (deuterium fluoride – carbon dioxide), which, like COIL, is a "transfer laser." The HF and DF lasers are unusual, in that there are several molecular energy transitions with sufficient energy to cross the threshold required for lasing. Since the molecules do not collide frequently enough to re-distribute the energy, several of these laser modes operate either simultaneously, or in extremely rapid succession, so that an HF or DF laser appears to operate simultaneously on several wavelengths unless a wavelength selection device is incorporated into the resonator.

Origin of the CW chemical HF/DF laser

The possibility of the creation of infrared lasers based on the vibrationally excited products of a chemical reaction was first proposed by John Polanyi in 1961. [1] A pulsed chemical laser was demonstrated by Jerome V. V. Kasper and George C. Pimentel in 1965. [2] First, chlorine (Cl2) was vigorously photo-disassociated into atoms, which then reacted with hydrogen, yielding hydrogen chloride (HCl) in an excited state suitable for a laser. Then hydrogen fluoride (HF) and deuterium fluoride (DF) were demonstrated. Pimentel went on to explore a DF-CO2 transfer laser. Although this work did not produce a purely chemical continuous wave laser, it paved the way by showing the viability of the chemical reaction as a pumping mechanism for a chemical laser.

The continuous wave (CW) chemical HF laser was first demonstrated in 1969, [3] and patented in 1972, [4] by D. J. Spencer, T. A. Jacobs, H. Mirels and R. W. F. Gross at The Aerospace Corporation in El Segundo, California. This device used the mixing of adjacent streams of H2 and F, within an optical cavity, to create vibrationally-excited HF that lased. The atomic fluorine was provided by dissociation of SF6 gas using a DC electrical discharge. Later work at US Army, US Air Force, and US Navy contractor organizations (e.g. TRW) used a chemical reaction to provide the atomic fluorine, a concept included in the patent disclosure of Spencer et al. [4] The latter configuration obviated the need for electrical power and led to the development of high-power lasers for military applications.

The analysis of the HF laser performance is complicated due to the need to simultaneously consider the fluid dynamic mixing of adjacent supersonic streams, multiple non-equilibrium chemical reactions and the interaction of the gain medium with the optical cavity. The researchers at The Aerospace Corporation developed the first exact analytic (flame sheet) solution, [5] the first numerical computer code solution [6] and the first simplified model [7] describing CW HF chemical laser performance.

Chemical lasers stimulated the use of wave-optics calculations for resonator analysis. This work was pioneered by E. A. Sziklas (Pratt & Whitney) and A. E. Siegman (Stanford University). [8] [9] Part I of their work dealt with Hermite-Gaussian Expansion and has received little use compared with Part II, which dealt with the Fast Fourier transform method, which is now a standard tool at United Technologies Corporation, Lockheed Martin, SAIC, Boeing, tOSC, MZA (Wave Train), and OPCI. Most of these companies competed for contracts to build HF and DF lasers for DARPA, the US Air Force, the US Army, or the US Navy throughout the 1970s and 1980s. General Electric and Pratt & Whitney dropped out of the competition in the early 1980s leaving the field to Rocketdyne (now part of Pratt & Whitney - although the laser organization remains today with Boeing) and TRW (now part of Northrop Grumman).

Comprehensive chemical laser models were developed at SAIC by R. C. Wade, [10] at TRW by C.-C. Shih, [11] by D. Bullock and M. E. Lainhart, [12] and at Rocketdyne by D. A. Holmes and T. R. Waite. [13] Of these, perhaps the most sophisticated was the CROQ code at TRW, outpacing the early work at Aerospace Corporation.[ citation needed ]

Performance

The early analytical models coupled with chemical rate studies [14] led to the design of efficient experimental CW HF laser devices at United Aircraft, [15] and The Aerospace Corporation. [16] Power levels up to 10 kW were achieved. DF lasing was obtained by the substitution of D2 for H2. A group at United Aircraft Research Laboratories produced a re-circulating chemical laser, [17] which did not rely on the continuous consumption of chemical reactants.

The TRW Systems Group in Redondo Beach, California, subsequently received US Air Force contracts to build higher power CW HF/DF lasers. Using a scaled-up version of an Aerospace Corporation design, TRW achieved 100 kW power levels. General Electric, Pratt & Whitney, & Rocketdyne built various chemical lasers on company funds in anticipation of receiving DoD contracts to build even larger lasers. Only Rocketdyne received contracts of sufficient value to continue competing with TRW. TRW produced the MIRACL device for the U.S. Navy that achieved megawatt power levels. The latter is believed to be the highest power continuous laser, of any type, developed to date (2007).

TRW also produced a cylindrical chemical laser (the Alpha laser) for DARPA Zenith Star, which had the theoretical advantage of being scalable to even larger powers. However, by 1990, the interest in chemical lasers had shifted toward shorter wavelengths, and the chemical oxygen iodine laser (COIL) gained the most interest, producing radiation at 1.315 μm. There is a further advantage that the COIL laser generally produces single wavelength radiation, which is very helpful for forming a very well focused beam. This type of COIL laser is used today in the ABL (Airborne Laser, the laser itself being built by Northrop Grumman) and in the ATL (Advanced Tactical Laser) produced by Boeing. Meanwhile, a lower power HF laser was used for the THEL (Tactical High Energy Laser) built in the late 1990s for the Israeli Ministry of Defense in cooperation with the U.S. Army SMDC. It is the first fielded high energy laser to demonstrate effectiveness in fairly realistic tests against rockets and artillery. The MIRACL laser has demonstrated effectiveness against certain targets flown in front of it at White Sands Missile Range, but it is not configured for actual service as a fielded weapon. ABL was successful in shooting down several full sized missiles from significant ranges, and ATL was successful in disabling moving land vehicles and other tactical targets.

Despite the performance advantages of chemical lasers, the Department of Defense stopped all development of chemical laser systems with the termination of the Airborne Laser Testbed in 2012. The desire for a "renewable" power source, i.e. not having to supply unusual chemicals like fluorine, deuterium, basic hydrogen-peroxide, or iodine, led the DoD to push for electrically pumped lasers such as diode pumped alkali lasers (DPALS). An "Inside the Army" weekly report mentions "Directed Energy Master Plan" [18]

Related Research Articles

<span class="mw-page-title-main">Laser</span> Device which emits light via optical amplification

A laser is a device that emits light through a process of optical amplification based on the stimulated emission of electromagnetic radiation. The word laser is an anacronym that originated as an acronym for light amplification by stimulated emission of radiation. The first laser was built in 1960 by Theodore Maiman at Hughes Research Laboratories, based on theoretical work by Charles H. Townes and Arthur Leonard Schawlow.

<span class="mw-page-title-main">Tactical High Energy Laser</span> Laser system designed by the United States and Israel for use in military operations

The Tactical High-Energy Laser, or THEL, was a laser developed for military use, also known as the Nautilus laser system. The mobile version is the Mobile Tactical High-Energy Laser, or MTHEL. In 1996, the United States and Israel entered into an agreement to produce a cooperative THEL called the Demonstrator, which would utilize deuterium fluoride chemical laser technologies. In 2000 and 2001, THEL shot down 28 Katyusha artillery rockets and five artillery shells. On November 4, 2002, THEL shot down an incoming artillery shell. The prototype weapon was roughly the size of six city buses, made up of modules that held a command center, radar and a telescope for tracking targets, the chemical laser itself, fuel and reagent tanks, and a rotating mirror to reflect its beam toward speeding targets. It was discontinued in 2005.

Q-switching, sometimes known as giant pulse formation or Q-spoiling, is a technique by which a laser can be made to produce a pulsed output beam. The technique allows the production of light pulses with extremely high (gigawatt) peak power, much higher than would be produced by the same laser if it were operating in a continuous wave mode. Compared to modelocking, another technique for pulse generation with lasers, Q-switching leads to much lower pulse repetition rates, much higher pulse energies, and much longer pulse durations. The two techniques are sometimes applied together.

<span class="mw-page-title-main">Vertical-cavity surface-emitting laser</span>

The vertical-cavity surface-emitting laser, or VCSEL, is a type of semiconductor laser diode with laser beam emission perpendicular from the top surface, contrary to conventional edge-emitting semiconductor lasers which emit from surfaces formed by cleaving the individual chip out of a wafer. VCSELs are used in various laser products, including computer mice, fiber optic communications, laser printers, Face ID, and smartglasses.

<span class="mw-page-title-main">Wireless power transfer</span> Transmission of electrical energy without wires as a physical link

Wireless power transfer (WPT), wireless power transmission, wireless energy transmission (WET), or electromagnetic power transfer is the transmission of electrical energy without wires as a physical link. In a wireless power transmission system, a transmitter device, driven by electric power from a power source, generates a time-varying electromagnetic field, which transmits power across space to a receiver device, which extracts power from the field and supplies it to an electrical load. The technology of wireless power transmission can eliminate the use of the wires and batteries, thus increasing the mobility, convenience, and safety of an electronic device for all users. Wireless power transfer is useful to power electrical devices where interconnecting wires are inconvenient, hazardous, or are not possible.

<span class="mw-page-title-main">MIRACL</span>

MIRACL, or Mid-Infrared Advanced Chemical Laser, is a directed energy weapon developed by the US Navy. It is a deuterium fluoride laser, a type of chemical laser.

<span class="mw-page-title-main">Excimer laser</span> Type of ultraviolet laser important in chip manufacturing and eye surgery

An excimer laser, sometimes more correctly called an exciplex laser, is a form of ultraviolet laser which is commonly used in the production of microelectronic devices, semiconductor based integrated circuits or "chips", eye surgery, and micromachining. Since 1960s excimer lasers are widely used in high-resolution photolithography machines, one of the critical technologies required for microelectronic chip manufacturing.

<span class="mw-page-title-main">Gas laser</span> Laser in which electricity is discharged through gas

A gas laser is a laser in which an electric current is discharged through a gas to produce coherent light. The gas laser was the first continuous-light laser and the first laser to operate on the principle of converting electrical energy to a laser light output. The first gas laser, the Helium–neon laser (HeNe), was co-invented by Iranian-American engineer and scientist Ali Javan and American physicist William R. Bennett, Jr., in 1960. It produced a coherent light beam in the infrared region of the spectrum at 1.15 micrometres.

A Raman laser is a specific type of laser in which the fundamental light-amplification mechanism is stimulated Raman scattering. In contrast, most "conventional" lasers rely on stimulated electronic transitions to amplify light.

<span class="mw-page-title-main">Ion laser</span> Type of gas laser

An ion laser is a gas laser that uses an ionized gas as its lasing medium. Like other gas lasers, ion lasers feature a sealed cavity containing the laser medium and mirrors forming a Fabry–Pérot resonator. Unlike helium–neon lasers, the energy level transitions that contribute to laser action come from ions. Because of the large amount of energy required to excite the ionic transitions used in ion lasers, the required current is much greater, and as a result all but the smallest ion lasers are water-cooled. A small air-cooled ion laser might produce, for example, 130 milliwatts of output light with a tube current of about 10 amperes and a voltage of 105 volts. Since one ampere times one volt is one watt, this is an electrical power input of about one kilowatt. Subtracting the (desirable) light output of 130 mW from power input, this leaves the large amount of waste heat of nearly one kW. This has to be dissipated by the cooling system. In other words, the power efficiency is very low.

<span class="mw-page-title-main">Optical parametric oscillator</span>

An optical parametric oscillator (OPO) is a parametric oscillator that oscillates at optical frequencies. It converts an input laser wave with frequency into two output waves of lower frequency by means of second-order nonlinear optical interaction. The sum of the output waves' frequencies is equal to the input wave frequency: . For historical reasons, the two output waves are called "signal" and "idler", where the output wave with higher frequency is the "signal". A special case is the degenerate OPO, when the output frequency is one-half the pump frequency, , which can result in half-harmonic generation when signal and idler have the same polarization.

<span class="mw-page-title-main">Chemical oxygen iodine laser</span> US near-infrared chemical laser

A chemical oxygen iodine laser (COIL) is a near–infrared chemical laser. As the beam is infrared, it cannot be seen with the naked eye. It is capable of output power scaling up to megawatts in continuous mode. Its output wavelength is 1315 nm, a transition wavelength of atomic iodine.

The hydrogen fluoride laser is an infrared chemical laser. It is capable of delivering continuous output power in the megawatt range.

A fiber laser is a laser in which the active gain medium is an optical fiber doped with rare-earth elements such as erbium, ytterbium, neodymium, dysprosium, praseodymium, thulium and holmium. They are related to doped fiber amplifiers, which provide light amplification without lasing. Fiber nonlinearities, such as stimulated Raman scattering or four-wave mixing can also provide gain and thus serve as gain media for a fiber laser.

<span class="mw-page-title-main">Disk laser</span>

A disk laser or active mirror (Fig.1) is a type of diode pumped solid-state laser characterized by a heat sink and laser output that are realized on opposite sides of a thin layer of active gain medium. Despite their name, disk lasers do not have to be circular; other shapes have also been tried. The thickness of the disk is considerably smaller than the laser beam diameter. Initially, this laser cavity configuration had been proposed and realized experimentally for thin slice semiconductor lasers.

Power scaling of a laser is increasing its output power without changing the geometry, shape, or principle of operation. Power scalability is considered an important advantage in a laser design. this means it can increase power without changing outside features!

Anthony E. Siegman was an electrical engineer and educator at Stanford University who investigated and taught about masers and lasers. Known to almost all as Tony Siegman, he was president of the Optical Society of America [now Optica (society)] in 1999 and was awarded the Esther Hoffman Beller Medal in 2009.

Laser linewidth is the spectral linewidth of a laser beam.

<span class="mw-page-title-main">ElectricOIL</span>

The Electric Oxygen Iodine Laser, or ElectricOIL, or EOIL, is an infrared hybrid electrical / chemical laser. Its output wavelength is 1.315 μm, the wavelength of transition of atomic iodine. The lasing state I* is produced by near-resonant energy transfer with metastable singlet oxygen O2(a1Δ) [denoted hereafter as O2(a)].

References

  1. ↑ Polanyi, J. C. (1961). "Proposal for an Infrared Maser Dependent on Vibrational Excitation". Journal of Chemical Physics . 34 (1): 347–348. Bibcode:1961JChPh..34..347P. doi:10.1063/1.1731608.
  2. ↑ Kasper, J. V. V.; Pimentel, G. C. (1965). "HCl Chemical Laser". Physical Review Letters . 14 (10): 352–354. Bibcode:1965PhRvL..14..352K. doi:10.1103/PhysRevLett.14.352.
  3. ↑ Spencer, D. J.; Jacobs, T. A.; Mirels, H.; Gross, R. W. F. (1969). "Continuous-Wave Chemical Laser". International Journal of Chemical Kinetics . 1 (5): 493–494. doi:10.1002/kin.550010510.
  4. 1 2 Spencer, D. J.; Jacobs, T. A.; Mirels, H.; Gross, R. W. F. (1972). "Continuous-Wave Chemical Laser". U.S. Patent 3,688,215 .{{cite web}}: Missing or empty |url= (help)
  5. ↑ Hofland, R.; Mirels, H. (1972). "Flame-Sheet Analysis of C. W. Diffusion-Type Chemical Lasers, I. Uncoupled Radiation". AIAA Journal . 10 (4): 420–428. Bibcode:1972AIAAJ..10..420H. doi:10.2514/3.50113.
  6. ↑ King, W. S.; Mirels, H. (1972). "Numerical Study of a Diffusion-Type Chemical Laser". AIAA Journal . 10 (12): 1647–1654. Bibcode:1972AIAAJ..10.1647K. doi:10.2514/3.6697.
  7. ↑ Mirels, H.; Hofland, R.; King, W. S. (1972). "Simplified Model of CW Diffusion-Type Chemical Laser". AIAA Journal . 11 (2): 156–184. Bibcode:1973AIAAJ..11..156M. doi:10.2514/3.50447.
  8. ↑ Siegman, A. E.; Sziklas, E. A. (1974). "Mode calculations in unstable resonator with flowing saturable gain. I. Hermite-Gaussian expansion". Applied Optics . 13 (12): 2775–2792. Bibcode:1974ApOpt..13.2775S. doi:10.1364/AO.13.002775. PMID   20134790.
  9. ↑ Sziklas, E. A.; Siegman, A. E. (1975). "Mode calculations in unstable resonator with flowing saturable gain. II. Fast Fourier transform method". Applied Optics . 14 (8): 1874–1889. Bibcode:1975ApOpt..14.1874S. doi:10.1364/AO.14.001874. PMID   20154934.
  10. ↑ Wade, R. C. (1998). "Chemical Lasers with Annular Gain Media". In Kossowsky, R.; Jelinek, M.; Novák, J. (eds.). Optical Resonators - Science and Engineering. Kluwer Academic. pp. 211–223. ISBN   978-0-7923-4962-4.
  11. ↑ Shih, C.-C. (1994). "Modeling of rear cone misalignment in the annular resonator". Proceedings of SPIE . Modeling and Simulation of Laser Systems III. 2117: 128–135. Bibcode:1994SPIE.2117..128S. doi:10.1117/12.171670. S2CID   109715908.
  12. ↑ Bullock, D.; Lainhart, M. E. (1993). "Vector eigenmodes in a cylindrical laser". Proceedings of SPIE . Laser Resonators and Coherent Optics: Modeling, Technology, and Applications. 1868: 367–379. Bibcode:1993SPIE.1868..367B. doi:10.1117/12.150627. S2CID   123066559.
  13. ↑ Holmes, D. A.; Waite, T. R. (1983). "Common-pass decentered annular ring resonator". U.S. Patent 4,514,850 .{{cite web}}: Missing or empty |url= (help)
  14. ↑ Cohen, N. (1971). A Review of Rate Coefficients for Reactions in the H2-F2 Laser System (Report). The Aerospace Corporation. TR-0172(2779)-2.
  15. ↑ Hinchen, J. J.; Banas, C. M. (1970). "cw HF Electric Discharge Mixing Laser". Applied Physics Letters . 17 (9): 386–388. Bibcode:1970ApPhL..17..386H. doi:10.1063/1.1653447.
  16. ↑ Spencer, D. J.; Mirels, H.; Durran, D. A. (1972). "Performance of cw HF Chemical Laser with N2 or He Diluent". Journal of Applied Physics . 43 (3): 1151–1157. Bibcode:1972JAP....43.1151S. doi:10.1063/1.1661228.
  17. ↑ Freiber, R. J.; Chenausky, P. P.; Fradin, D. W. (1975). "A Self-contained, Recirculating Chemical Laser". Supplement to International Electron Devices Meeting 1974. pp. 187–190. doi:10.1109/IEDM.1974.6219662.
  18. ↑ "SMDC EYES TACTICAL LASER FOR KOREA, TOUTS DIRECTED ENERGY DEVELOPMENT". Inside the Army . Inside Washington Publishers. 11 (17): 1, 14–16. 1999.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.