In mathematics, a rose or rhodonea curve is a sinusoid specified by either the cosine or sine functions with no phase angle that is plotted in polar coordinates. Rose curves or "rhodonea" were named by the Italian mathematician who studied them, Guido Grandi, between the years 1723 and 1728. [1]
A rose is the set of points in polar coordinates specified by the polar equation [2]
or in Cartesian coordinates using the parametric equations
Roses can also be specified using the sine function. [3] Since
Thus, the rose specified by r = a sin(kθ) is identical to that specified by r = a cos(kθ) rotated counter-clockwise by π/2k radians, which is one-quarter the period of either sinusoid.
Since they are specified using the cosine or sine function, roses are usually expressed as polar coordinate (rather than Cartesian coordinate) graphs of sinusoids that have angular frequency of k and an amplitude of a that determine the radial coordinate r given the polar angle θ (though when k is a rational number, a rose curve can be expressed in Cartesian coordinates since those can be specified as algebraic curves [4] ).
Roses are directly related to the properties of the sinusoids that specify them.
All roses display one or more forms of symmetry due to the underlying symmetric and periodic properties of sinusoids.
When k is a non-zero integer, the curve will be rose-shaped with 2kpetals if k is even, and k petals when k is odd. [6] The properties of these roses are a special case of roses with angular frequencies k that are rational numbers discussed in the next section of this article.
A rose with k = 1 is a circle that lies on the pole with a diameter that lies on the polar axis when r = a cos(θ). The circle is the curve's single petal. (See the circle being formed at the end of the next section.) In Cartesian coordinates, the equivalent cosine and sine specifications are
and
respectively.
A rose with k = 2 is called a quadrifolium because it has 2k = 4 petals. In Cartesian coordinates the cosine and sine specifications are
and
respectively.
A rose with k = 3 is called a trifolium [9] because it has k = 3 petals. The curve is also called the Paquerette de Mélibée. In Cartesian Coordinates the cosine and sine specifications are
and
respectively. [10] (See the trifolium being formed at the end of the next section.)
A rose with k = 4 is called a octafolium because it has 2k = 8 petals. In Cartesian Coordinates the cosine and sine specifications are
and
respectively.
A rose with k = 5 is called a pentafolium because it has k = 5 petals. In Cartesian Coordinates the cosine and sine specifications are
and
respectively.
The total area of a rose with polar equation of the form r = a cos(kθ) or r = a sin(kθ), where k is a non-zero integer, is [11]
When k is even, there are 2k petals; and when k is odd, there are k petals, so the area of each petal is πa2/4k.
In general, when k is a rational number in the irreducible fraction form k = n/d, where n and d are non-zero integers, the number of petals is the denominator of the expression 1/2 − 1/2k = n − d/2n. [12] This means that the number of petals is n if both n and d are odd, and 2n otherwise. [13]
A rose with k = 1/2 is called the Dürer folium, named after the German painter and engraver Albrecht Dürer. The roses specified by r = a cos(θ/2) and r = a sin(θ/2) are coincident even though a cos(θ/2) ≠ a sin(θ/2). In Cartesian coordinates the rose is specified as [17]
The Dürer folium is also a trisectrix, a curve that can be used to trisect angles.
A rose with k = 1/3 is a limaçon trisectrix that has the property of trisectrix curves that can be used to trisect angles. The rose has a single petal with two loops. (See the animation below.)
A rose curve specified with an irrational number for k has an infinite number of petals [18] and will never complete. For example, the sinusoid r = a cos(πθ) has a period T = 2, so, it has a petal in the polar angle interval −1/2 ≤ θ ≤ 1/2 with a crest on the polar axis; however there is no other polar angle in the domain of the polar equation that will plot at the coordinates (a,0). Overall, roses specified by sinusoids with angular frequencies that are irrational constants form a dense set (that is, they come arbitrarily close to specifying every point in the disk r ≤ a).
Euler's formula, named after Leonhard Euler, is a mathematical formula in complex analysis that establishes the fundamental relationship between the trigonometric functions and the complex exponential function. Euler's formula states that for any real number x:
In mathematics, the polar coordinate system is a two-dimensional coordinate system in which each point on a plane is determined by a distance from a reference point and an angle from a reference direction. The reference point is called the pole, and the ray from the pole in the reference direction is the polar axis. The distance from the pole is called the radial coordinate, radial distance or simply radius, and the angle is called the angular coordinate, polar angle, or azimuth. Angles in polar notation are generally expressed in either degrees or radians.
In mathematics, a spherical coordinate system is a coordinate system for three-dimensional space where the position of a given point in space is specified by three numbers, : the radial distance of the radial liner connecting the point to the fixed point of origin ; the polar angle θ of the radial line r; and the azimuthal angle φ of the radial line r.
In mathematics, the trigonometric functions are real functions which relate an angle of a right-angled triangle to ratios of two side lengths. They are widely used in all sciences that are related to geometry, such as navigation, solid mechanics, celestial mechanics, geodesy, and many others. They are among the simplest periodic functions, and as such are also widely used for studying periodic phenomena through Fourier analysis.
In mathematics and physical science, spherical harmonics are special functions defined on the surface of a sphere. They are often employed in solving partial differential equations in many scientific fields. A list of the spherical harmonics is available in Table of spherical harmonics.
In mathematics, the inverse trigonometric functions are the inverse functions of the trigonometric functions. Specifically, they are the inverses of the sine, cosine, tangent, cotangent, secant, and cosecant functions, and are used to obtain an angle from any of the angle's trigonometric ratios. Inverse trigonometric functions are widely used in engineering, navigation, physics, and geometry.
The Pythagorean trigonometric identity, also called simply the Pythagorean identity, is an identity expressing the Pythagorean theorem in terms of trigonometric functions. Along with the sum-of-angles formulae, it is one of the basic relations between the sine and cosine functions.
In physics and engineering, a phasor is a complex number representing a sinusoidal function whose amplitude, angular frequency, and initial phase are time-invariant. It is related to a more general concept called analytic representation, which decomposes a sinusoid into the product of a complex constant and a factor depending on time and frequency. The complex constant, which depends on amplitude and phase, is known as a phasor, or complex amplitude, and sinor or even complexor.
In geometry, the area enclosed by a circle of radius r is πr2. Here the Greek letter π represents the constant ratio of the circumference of any circle to its diameter, approximately equal to 3.14159.
In geometry, a strophoid is a curve generated from a given curve C and points A and O as follows: Let L be a variable line passing through O and intersecting C at K. Now let P1 and P2 be the two points on L whose distance from K is the same as the distance from A to K. The locus of such points P1 and P2 is then the strophoid of C with respect to the pole O and fixed point A. Note that AP1 and AP2 are at right angles in this construction.
In mathematics, sine and cosine are trigonometric functions of an angle. The sine and cosine of an acute angle are defined in the context of a right triangle: for the specified angle, its sine is the ratio of the length of the side that is opposite that angle to the length of the longest side of the triangle, and the cosine is the ratio of the length of the adjacent leg to that of the hypotenuse. For an angle , the sine and cosine functions are denoted simply as and .
Clenshaw–Curtis quadrature and Fejér quadrature are methods for numerical integration, or "quadrature", that are based on an expansion of the integrand in terms of Chebyshev polynomials. Equivalently, they employ a change of variables and use a discrete cosine transform (DCT) approximation for the cosine series. Besides having fast-converging accuracy comparable to Gaussian quadrature rules, Clenshaw–Curtis quadrature naturally leads to nested quadrature rules, which is important for both adaptive quadrature and multidimensional quadrature (cubature).
There are several equivalent ways for defining trigonometric functions, and the proof of the trigonometric identities between them depend on the chosen definition. The oldest and somehow the most elementary definition is based on the geometry of right triangles. The proofs given in this article use this definition, and thus apply to non-negative angles not greater than a right angle. For greater and negative angles, see Trigonometric functions.
The Marsaglia polar method is a pseudo-random number sampling method for generating a pair of independent standard normal random variables.
The differentiation of trigonometric functions is the mathematical process of finding the derivative of a trigonometric function, or its rate of change with respect to a variable. For example, the derivative of the sine function is written sin′(a) = cos(a), meaning that the rate of change of sin(x) at a particular angle x = a is given by the cosine of that angle.
In geometry, the tangential angle of a curve in the Cartesian plane, at a specific point, is the angle between the tangent line to the curve at the given point and the x-axis.
In geometry, a limaçon trisectrix is the name for the quartic plane curve that is a trisectrix that is specified as a limaçon. The shape of the limaçon trisectrix can be specified by other curves particularly as a rose, conchoid or epitrochoid. The curve is one among a number of plane curve trisectrixes that includes the Conchoid of Nicomedes, the Cycloid of Ceva, Quadratrix of Hippias, Trisectrix of Maclaurin, and Tschirnhausen cubic. The limaçon trisectrix a special case of a sectrix of Maclaurin.
In mathematics, a Madhava series is one of the three Taylor series expansions for the sine, cosine, and arctangent functions discovered in 14th or 15th century Kerala by the mathematician and astronomer Madhava of Sangamagrama or his followers in the Kerala school of astronomy and mathematics. Using modern notation, these series are:
In mathematics, a unit circle is a circle of unit radius—that is, a radius of 1. Frequently, especially in trigonometry, the unit circle is the circle of radius 1 centered at the origin in the Cartesian coordinate system in the Euclidean plane. In topology, it is often denoted as S1 because it is a one-dimensional unit n-sphere.