This article needs additional citations for verification .(November 2018) |
SEAT 1400 | |
---|---|
![]() SEAT 1400 A | |
Overview | |
Manufacturer | SEAT |
Production | 1953–1963 |
Assembly | Barcelona Zona Franca, Spain |
Designer | Dante Giacosa |
Body and chassis | |
Class | Large family car (D) |
Body style | 4-door sedan |
Layout | front-engine, rear-wheel drive |
Related | Fiat 1400 |
Powertrain | |
Engine | straight-4 |
Transmission | 4-speed manual |
Dimensions | |
Wheelbase | 265 cm (104.3 in) |
Length | 424 cm (166.9 in) |
Width | 166 cm (65.4 in) |
Height | 153 cm (60.2 in) |
Curb weight | 1,150 kg (2,540 lb)-1,250 kg (2,760 lb) |
Chronology | |
Successor | SEAT 1500 |
The SEAT 1400 was a rear-wheel-drive four-door mid-size sedan built by the Spanish car maker SEAT between 1953 and 1963. It was the first model produced by SEAT, and the first car to be assembled at the firm's then-new plant located in Barcelona's Zona Franca zone.
The car was a rebranded Fiat 1400, itself Fiat's first integrated chassis model.
Production started on November 13, 1953, carried out by an early workforce of 925 employees with a potential of 5 units produced per day; the first example carried the license plate 'B-87.223'. Initially, components were shipped as CKD kits from Italy and assembled by SEAT at their plant in Zona Franca, but in 1954 the Spanish-made parts content rose to a 93% proportion of the total in order to limit imports and to help the development of the almost non-existent Spanish supplier industry, thus fulfilling SEAT's assigned key role in the development of the Spanish economy as the national car maker of the post World War II Spain. In the next few years the model's production output would gradually increase, and by 1956 10,000 cars would be produced annually, with an average of 42 cars per day. [1]
In 1963, when the car was replaced by the SEAT 1500, 82,894 examples covering four distinctively different versions of the 1400 had been produced.
The first SEAT 1400, offered between 1953 and 1955, incorporated a 1395 cc four-cylinder water-cooled Fiat engine with a claimed output of 44 bhp and top speed of 120 km/h (75 mph).
The SEAT 1400 A, the first revision, launched for 1955 was a modernised version of the original 1400, based on the Fiat 1400 A which had appeared from Turin the previous year. Published power output was now raised to 50 bhp and the top speed to 125 km/h (78 mph).
Announced at the end of 1956, the SEAT 1400 B appearing for 1957 retained its predecessor's bodywork but featured a revised front grill and offered a two tone paint scheme. In addition to the sedan, a five-door station wagon and commercial delivery truck version were available. Claimed engine output and maximum speed for the sedan were, from 1958, 58 bhp and 135 km/h (84 mph). This version of the 1400 would continue in production until 1964.
The SEAT 1400 C was introduced in 1960. The modern Pininfarina styled body, came from the recently introduced Fiat 1800. The previous SEAT 1400 B remained in production: the two cars were offered in parallel, sharing the same engine, though the newer car was longer and, it appears, slightly heavier than the old. The decision to fit the old four-cylinder unit in the new bodied SEAT rather than to tool up for assembly in Catalonia of the new six-cylinder engines being fitted by Fiat in the new-bodied cars appears to have been taken on cost grounds: disposable incomes in Spain at this time were far lower than those in Italy. In 1963 a five-door estate version of the 1400 C appeared, featuring a two piece tailgate. The introduction of a diesel-engined version would have to await the successor model, however.
The SEAT Marbella was a badge-engineered Fiat Panda produced by SEAT from 1980 to 1986, in the company's Landaben plant in the Spanish city of Pamplona and also in the Zona Franca plant in Barcelona. After the break in the partnership between SEAT and Fiat, the former's model was restyled and renamed SEAT Marbella. It received a slight restyling in 1983, with a new grille and other slight differences.
The Dodge Dart is a line of passenger cars produced by Dodge from the 1959 to 1976 model years in North America, with production extended to later years in various other markets.
The Chrysler Valiant was a full-size car which was sold by Chrysler Australia between 1962 and 1981. Initially a rebadged locally assembled Plymouth Valiant from the United States, from the second generation launched in 1963, the Valiant was fully manufactured in Australia. It was sold locally but also in New Zealand and South Africa, with smaller numbers also exported to South-East Asia and the United Kingdom.
The Fiat Ritmo is a small, front-engine, front-wheel drive family car manufactured and marketed by Fiat, launched in April 1978 at the Turin Motor show and offered in 3- and 5-door hatchback and cabriolet body styles – from 1978 to 1988 with two facelifts.
The Fiat 125 is a large family car manufactured and marketed by Italian company Fiat from 1967 to 1972. Derivatives were built under license outside Italy until the 1990s. As launched the car was unusual in blending saloon car passenger accommodation with sports car performance, a combination which would be more widely adopted by the European volume auto-makers in the decade ahead.
The Fiat 1100 is a small family car produced from 1953 until 1969 by the Italian manufacturer Fiat. It was an all-new unibody replacement for the Fiat 1100 E, which descended from the pre-war, body-on-frame Fiat 508 C Balilla 1100. The 1100 was changed steadily and gradually until being replaced by the new Fiat 128 in 1969. There were also a series of light commercial versions of the 1100 built, with later models called the Fiat 1100T, which remained in production until 1971. The Fiat 1100 D also found a long life in India, where Premier Automobiles continued to build the car until the end of 2000.
The Mercedes-Benz W108 and W109 are luxury cars produced by Mercedes-Benz from 1965 through to 1972. The line was an upgrade of the Mercedes-Benz W114/W115, to succeed the W111 and W112 fintail sedans. The cars were successful in West Germany and in export markets including North America and Southeast Asia. During the seven-year run, a total of 383,361 units were manufactured.
The Fiat 508 Balilla was a compact car designed and produced by Fiat from 1932 to 1937. It was, effectively, the replacement of the Fiat 509, although production of the earlier model had ceased back in 1929. It had a three-speed transmission, seated four, and had a top speed of about 50 mph (80 km/h). It sold for 10,800 lire. About 113,000 were produced.
The Fiat 850 is a small rear-engine, rear-wheel-drive car manufactured and marketed by Italian car manufacturer Fiat from 1964 to 1973.
Dante Giacosa was an Italian automobile designer and engineer responsible for a range of Italian automobile designs — and for refining the front-wheel drive layout to an industry-standard configuration. He has been called the deus ex machina of Fiat.
The Opel Kapitän is a luxury car made in several different generations by the German car manufacturer Opel from 1938 until 1970.
The Fiat 1300 and Fiat 1500 are a series of front-engine, rear-drive automobiles manufactured and marketed by Fiat from 1961 to 1967, replacing the Fiat 1400 and Fiat 1200 coupé, spyder and cabriolet. The 1300 and 1500 were essentially identical to each other except for their engine displacement, as indicated by their model names, and were offered in sedan/saloon, station wagon, convertible and coupé body styles which shared little mechanically with the other body styles except the 1500 engine.
The Fiat 1400 and Fiat 1900 are passenger cars produced by Italian automotive manufacturer Fiat from 1950 to 1958 and from 1952 to 1959 respectively. The two models shared body and platform, but while the 1.4-litre 1400 was Fiat's intermediate offering, the upmarket 1900 had an enlarged 1.9-litre engine and more luxurious trim and equipment, to serve as flagship in the manufacturer's range.
The SEAT 132 is a four door, rear wheel drive notchback saloon produced by SEAT from 1973 to 1982, as a rebadged version of the Fiat 132. It was presented for the first time at the Barcelona Motor Show, and was assembled in Barcelona's Zona Franca in Catalonia, Spain.
The SEAT 1500 was a Spanish-built 6-seater model of saloon and estate cars, based on the Italian Fiat 2300 and using a 1481 cc engine from the Fiat 1500. The 1500 was the successor to the SEAT 1400 C; it was manufactured from 1963 to 1973, with the five door estate ("Familiar") version arriving in 1965. Apart from the larger engine, differences between the 1500 and the C version of its predecessor were limited to minor details such as a speedometer that now read up to 160 km/h (100 mph).
The Vauxhall Wyvern is a medium-sized family car introduced by Vauxhall in 1948 as a successor to the Vauxhall 12. The name comes from the mythical beast the wyvern, and may be due to a misidentification of the heraldic griffin on the Vauxhall badge.
The Fiat 1800 and 2100 are six-cylinder automobiles produced by Italian manufacturer Fiat between 1959 and 1968. Both models were introduced in 1959. A four-cylinder 1500-cc version, the 1500L, was added to the range in 1963, when the 2100 was replaced by the larger engined 2300. The 1800/2100 were designed by Fiat's own Dante Giacosa.
The fourth-generation Honda Civic is a Japanese sub-compact automobile. It was produced by Honda from 1987 until 1991 with the wagon continuing in production in some markets until 1996. The suspension had a new double-wishbone suspension in the front and an independent suspension in the rear, the wheelbase was increased to 250 centimetres (98 in) from that of the third-generation Civic, and the body was redesigned with a lower hood line and more glass, resulting in less drag. The redesigned Civic was introduced in 1987 for the 1988 model year. The fourth-generation Civic would be available in three variants; 3-door hatchback, 4-door sedan and 5-door wagon with various trim levels offered in each variant.
In 2023, Spain produced 2.45 million cars which makes it the 8th largest automobile producer country in the world and the 2nd largest car manufacturer in Europe after Germany, a position it maintained in 2024.
The Talbot Baby is a six-cylinder executive sporting car launched by the French Talbot company in 1936. The three standard body types offered were a "coach", a two-door four-seater "cabriolet" and a two-door two-seater "cabriolet". The Baby was one of the first new models to appear after the French part of the Anglo-French Sunbeam-Talbot-Darracq combine was purchased, in 1935, by auto-entrepreneur Tony Lago. Production slowed with the onset of war and had ended completely by mid-1942 when the manufacturer's Suresnes plant was converted for war production.