Spanish corvette Tornado

Last updated
CSSAlabama.jpg
Painting of CSS Alabama, sister ship of Tornado, on display at the US Navy's Naval Historical Center
History
Naval ensign of the Confederate States of America (1863-1865).svg Civil Ensign of the United Kingdom.svg Confederate States
NameCSS Texas
Launched1863
Commissioned1865
FatePurchased by Chile for £75,000.
Naval Jack of Chile.svgChile
Owner Chilean Navy
AcquiredFebruary 1866
RenamedPampero
FateCaptured off Madeira by the Spanish screw frigate Gerona
Flag of Spain (1785-1873 and 1875-1931).svg Flag of the First Spanish Republic.svgFlag of Spain (1931-1939).svgSpain
Acquired1870
Commissioned1870
Decommissioned1938
RenamedTornado
Captured28 October 1873
Fate
  • Sunk by aircraft in 1938
  • Hull broken up in 1939
General characteristics
Displacement2,100 tons [1]
Length231 ft (70 m) [1]
Beam33 ft (10 m) [1]
PropulsionSteam, sail
Speed13 knots (24 km/h; 15 mph) [1]
Range1,700 miles (2,700 km) [1]
Armament
  • 1 × 7.8 in (198 mm) muzzleloading Parrott gun [1]
  • 2 × 160/15 cal gun
  • 2 × 120 mm (5 in) bronze gun [1]
  • 2 × 87 mm (3 in)/24 cal Hontoria breechloading guns [1]

Tornado was a bark-rigged screw steam corvette [2] [3] of the Spanish Navy, first launched at Clydebank, Scotland in 1863, as the Confederate raider CSS Texas. She is most famous for having captured the North American filibustering ship Virginius, which led to the "Virginius Affair", which afterwards led to the Spanish-American Crisis of 1873.

Contents

Design and construction

The ship was built as the Confederate raider CSS Texas, but was seized by the British government in 1863 and acquired in 1865. [4] She was purchased by the Chilean government for £75,000, through Isaac Campbell & Co, in February 1866. [5]

In early 1862, Lt. George T. Sinclair was sent to England, with orders to build a clipper propeller for cruising purposes, and to take command of her when she was ready for sea. [5] [ dead link ] His instructions were to confer with Commander Bulloch in Liverpool, as to the design of the vessel, and the building, fitting out and arming of her. [5] [ dead link ] Bulloch received orders to help Sinclair with funds and advice. He showed Sinclair the drawings and specifications for CSS Alabama, also the contract with Lairds, and they both decided to use these as a basis for the new cruiser. [5] [ dead link ]

What Sinclair did, was to arrange, with the help of the Confederate diplomat James M. Mason, for an issue of bonds, each equal to 25 bales of cotton, weight 12,500 lb (5,700 kg). Seven individuals took up these bonds, and were effectively the owners of this new vessel. [5] [ dead link ] The new cruiser was contracted by James and George Thomson of Glasgow, in October 1862. The same firm that was contracted to build an ironclad ram for Lt. North. Pampero was modeled on Alabama, even though she was somewhat larger. [6]

A plan showing body plan, upper deck, hold and platforms of CSS Alabama, sister ship of Tornado Alabama plans 1.jpg
A plan showing body plan, upper deck, hold and platforms of CSS Alabama, sister ship of Tornado

Pampero was to be 231 feet (70 m) in length, 33 feet (10 m) in breadth, powered by both sail and steam. Bark rigged, she was equipped for cruising under canvas or steam, with telescopic funnels, and a raise-able screw. [6] Similar, but larger engines to Alabama were placed below the waterline for protection. Her frame was iron, with a mixture of iron and wood for the planking. [6] Her armament was to be three 8-inch (203 mm) pivot guns, and a broadside battery of four or more guns. The original contract called for Pampero to be ready for sea by July 1863, but the schedule could not be maintained. Guns and gun carriages were ordered, and Sinclair received £10,000 ($40,000) from Bulloch, and perhaps more. For his crew, Sinclair made arrangements for some men to come out from Baltimore. [7] By the spring of 1863, Sinclair was becoming very concerned about Pampero, and feared that the British government would not permit the departure of any vessel suspected to be Confederate. [7]

He visited Paris to discuss with John Slidell the possibility of transferring the vessel to France. Slidell suggested Hamburg in Germany would be a better alternative. However, Sinclair investigated this, but did not proceed with it. [5] [ dead link ] Meanwhile, the completion of Pampero was further delayed by labor troubles, and the seizure of Alexandria, another Confederate vessel in production at Lairds, by the British government. The Alexandria trial was indecisive, and Mason put off the launching of Pampero until a final verdict was reached. [5] [ dead link ]

Pampero herself first came to the attention of Thomas H. Dudley, United States Consul in Liverpool, in the spring of 1863, when he made an investigative tour of Northern England and Scotland, looking for any warships being built for the Confederates. [5] [ dead link ] He learned that Thomsons were building a screw steamer "of about 1500 tons," designed for great speed. [5] [ dead link ] He was told that she was to have an angle-iron frame and teak planking, and he found that among the workmen it was generally believed that she was for the South.

On his next trip to Scotland in August 1863, his suspicions increased as new details on the vessel came to light. The builders insisted that the boat was for the Turkish government, but Dudley`s informants in the yard insisted the boat was for the Confederates, being supervised by the same men as those who supervised the building of the ironclad ram. Dudley left behind a spy in Thomsons yard, who soon reported that the vessel was rigged in the same manner as Alabama, the drawings of which, he was told, were in Glasgow. [5] [ dead link ]

Pampero, by a Mrs. Galbraith, the vessel finally slid down the slipway on 29 October 1863. On 10 November, the American consul in Glasgow, W. L. Underwood formally requested that Pampero be detained. [5] [ dead link ] Although the British government did not make any immediate legal moves, in late November a British warship was moored abreast of Pampero, and she was placed under a 24-hour scrutiny by customs officers. Court proceedings against Pampero commenced on 18 March 1864, and were never satisfactorily concluded.

Capture

Spanish frigate Gerona chasing the British-built Chilean steamer Tornado Gerona y Tornado.jpg
Spanish frigate Gerona chasing the British-built Chilean steamer Tornado

During the Chincha Islands War, the South American allies sent agents to European shipyards in search of unsold warships originally laid down for the Confederate states; Peru purchased two screw corvettes in France and Chile, purchased two in Britain, Tornado and the Chilean corvette Abtao [8] She set sail from Leith with a British register, British flag, with a British crew, after having been duly examined by the Custom-house authorities, on 19 August 1866. [9] [10] Bound for a neutral destination, she had no Chilean men on board. [11]

She should have been in rendezvous with the British filibustering ship steamer Greathem Hall, aiming to interfere against the Spanish trade. However, the latter was captured by the British broadside ironclad HMS Caledonia and taken into Portland. Pampero (now named Tornado) waited patiently in the rendezvous point, until the crew were ordered to re-coal and head for the desolate islands of Fernando de Noronha, an old pirate haunt off the Brazilian coast, in order to collect unpaid wages and bonuses offered for the delivery of the vessel. [12]

The Spanish screw frigate Gerona had strict orders from the Spanish government to capture these ships. [13] Although the Peruvian vessels made it to Latin American waters, the Chilean Tornado was about to be captured. Gerona sailed from Cádiz early on the morning of 20 August 1866, arriving at Madeira, Portugal on 22 August. At 18:15, before arriving at the anchoring ground, she discovered a suspicious steamer weighing anchor and apparently getting ready to put to sea, for which reason the commander of Gerona, Don Benito Escalera, thought fit to proceed towards her to see if he could obtains news, and to be at the same time in readiness to follow in her track, should she turn out to be either of the vessels indicated to him by the Spanish government. [14]

At 20:00, the frigate, thinking that she perceived that Tornado was putting herself in motion, and having been confirmed in that opinion by the showing of the signal agreed upon on board the Spanish schooner, commenced to move in pursuit. [14] The course which Tornado took was in every way suspicious, for she kept as close into the north-west shore of this island as she could, coasting along it at a very short distance as far as Cape Tristão, where she put to sea steering towards the north. [14]

Notwithstanding that Tornado was some distance off at 20:30, and at a distance of more than 4 nautical miles (7.4 km; 4.6 mi) from the coast, the captain of Gerona, a slower ship, [15] resolved to call her attention by discharging at her a cannon loaded with blank cartridge, but seeing that she kept on her course, he fired another shotted cannon at her, and this he repeated three times, Tornado then stopped. [14]

He sent on board of her tow boats manned and tow officers to examine her, which was done in due form, although it could not be affirmed positively whether she carried munitions of war or not on account of the great quantity of coal with which she was stowed. The commander made the captain come on board Gerona, and this latter answered the questions that were put to him with insolent and insulting words so that he was obliged to be called to order. He then ordered the said captain to return to Tornado, which was navigated to Cadiz by the 1st Lieutenant Don Manuel del Bustillo, 2nd Lieutenant, four midshipmen, one engineer, and 51 armed men, and the crew of Tornado comprising 55 men, among whom were five Portuguese taken on board at Funchal, were transferred to Gerona. [14]

Captain John MacPherson and the crew of Tornado were treated with great severity, both on their way to Cádiz and after their arrival in that city. The case led to negotiations between the British and Spanish governments expressed the opinion that the Spanish government had no right to treat the crew as prisoners of war, much less to chain them up. [16]

Spanish service

Rotary gun-carriage and transit platform applied to the Spanish gunboat Tornado. Designed by John Ericcson, built at New York in 1873 Contributions to the Centennial Exhibition (1876) (14761289156).jpg
Rotary gun-carriage and transit platform applied to the Spanish gunboat Tornado. Designed by John Ericcson, built at New York in 1873
U.S steamer Virginius surrenders to the Spanish corvette Tornado. Oil on canvas 1873. Capture of the North American steamer Virginius by the Spanish corvette Tornado.jpg
U.S steamer Virginius surrenders to the Spanish corvette Tornado. Oil on canvas 1873.

She was brought into Spanish service as Tornado, [13] and rated as screw corvette. During the Ten Years' War, she saw service in Cuban waters and had a notorious incident with the American filibustering steamer Virginius, that had been bought for the purpose of being used for landing military expeditions on Cuba in aid of the insurgents. Virginius had been engaged in this work for months, being even called by one of the Havana newspapers as the famous filibuster steamer Virginius. [17]

On 31 October 1873, she was bound from Kingston, Jamaica to some point in Cuba, flying the US flag, and carrying a cargo of war material. Having a crew of 52 (chiefly Americans and Britons) and 103 passengers (mostly Cubans), [17] Virginius was sighted by Tornado, and she immediately fled in a northerly direction toward Jamaica, but was chased by her, captured and taken into Santiago de Cuba. Fifty-three of the crew and passengers were condemned to death by court-martial, and between 4–8 November, were shot; among them were eight American citizens. [17]

The capture on the high seas of a vessel vearing the American flag, presents a very grave question, which will need investigation; ...and if it prove that an American citizen has been wrongfully executed, this government will require most ample reparation. [17]

Joseph Fry, captain of Virginius Joseph Fry.jpg
Joseph Fry, captain of Virginius

Relations between Spain and the United States became strained, and war seemed imminent, but on 8 December, the Spanish government agreed to surrender Virginius to the US on 16 December, to deliver the survivors of the crew and passengers to a US warship at Santiago, and to salute the US flag at Santiago on 25 December if it was not proved before that date that Virginius was not entitled to sail under American colors. Virginius foundered off Cape Hatteras as she was being towed to the United States by Ossipee. George Henry Williams, the Attorney General of the United States decided before 25 December that Virginius was the property of General Quesada and other Cubans, and had had no right to carry the American flag.

Under an agreement of the 27 February 1875, the Spanish government paid to the United States an indemnity of $80,000 for the execution of the Americans, and another indemnity to the British government.

Tornado was converted to a torpedo-training vessel in 1886. From 1898 until her destruction by the Nationalist aviation in 1938, she served as a hospice for poor children of sailors and fishermen killed or drowned in maritime accidents, in the port of Barcelona. [18] She was finally broken up in 1939.

Tornado, serving as a depot ship, before being sunk by a Nationalist Air Raid during the Spanish Civil War 10corbetatornado.jpg
Tornado, serving as a depot ship, before being sunk by a Nationalist Air Raid during the Spanish Civil War

Related Research Articles

<i>Huáscar</i> (ironclad) 19th-century small armoured turret ship

Huáscar is an ironclad turret ship owned by the Chilean Navy built in 1865 for the Peruvian government. It is named after the 16th-century Inca emperor, Huáscar. She was the flagship of the Peruvian Navy and participated in the Battle of Pacocha and the War of the Pacific of 1879–1883. At the Battle of Angamos, Huáscar, captained by renowned Peruvian naval officer Miguel Grau Seminario, was captured by the Chilean fleet and commissioned into the Chilean Navy.

<i>Virginius</i> Affair Dispute among the United States, the United Kingdom, and Spain

The Virginius Affair was a diplomatic dispute that occurred from October 1873 to February 1875 between the United States, Great Britain, and Spain during the Ten Years' War. Virginius was a fast American ship hired by Cuban insurrectionists to land men and munitions in Cuba to attack the Spanish regime, in support of the Ten-Year revolutionary war. It was captured by the Spanish, who wanted to try the men onboard as pirates and execute them. The Spanish executed 53 men in Santiago de Cuba, but stopped when the British government intervened.

Japanese ironclad <i>Kōtetsu</i> First ironclad warship of the Imperial Japanese Navy

Kōtetsu, later renamed Azuma, was the first ironclad warship of the Imperial Japanese Navy. She was designed as an armored ram for service in shallow waters, but also carried three guns. The ship was built in Bordeaux, France, for the Confederate States Navy under the cover name Sphinx, but was sold to Denmark after the sale of warships by French builders to the Confederacy was forbidden in 1863. The Danes refused to accept the ship and sold her to the Confederates which commissioned her as CSS Stonewall in 1865. The ship did not reach Confederate waters before the end of the American Civil War in April and was turned over to the United States.

CSS <i>Baltic</i> Ironclad of the Confederate States Navy

CSS Baltic was an ironclad warship that served in the Confederate States Navy during the American Civil War. A towboat before the war, she was purchased by the state of Alabama in December 1861 for conversion into an ironclad. After being transferred to the Confederate Navy in May 1862 as an ironclad, she served on Mobile Bay off the Gulf of Mexico. Baltic's condition in Confederate service was such that naval historian William N. Still Jr. has described her as "a nondescript vessel in many ways". Over the next two years, parts of the ship's wooden structure were affected by wood rot. Her armor was removed to be put onto the ironclad CSS Nashville in 1864. By that August, Baltic had been decommissioned. Near the end of the war, she was taken up the Tombigbee River, where she was captured by Union forces on May 10, 1865. An inspection of Baltic the next month found that her upper hull and deck were rotten and that her boilers were unsafe. She was sold on December 31, and was likely broken up in 1866.

USS <i>Ossipee</i> (1861) Gunboat of the United States Navy

The first USS Ossipee was a wooden, screw sloop-of-war in commission in the United States Navy at various times between 1861 and 1889. She served in the Union Navy during the American Civil War. She was named for the Ossipee River of New Hampshire and Maine. The USS Ossipee was present during the Alaska Purchase.

USS <i>Kansas</i> (1863) Gunboat of the United States Navy

USS Kansas was a gunboat constructed for the Union Navy during the middle of the American Civil War. She was outfitted with heavy guns and assigned to the Union blockade of the waterways of the Confederate States of America. She was the first U.S. Navy ship to be named Kansas and was the first of a class of 836-ton screw steam gunboats. At war's end, she continued serving her country by performing survey work and defending American interests in Cuba until sold in 1883.

<span class="mw-page-title-main">Battle of Abtao</span>

The Battle of Abtao was a naval action fought on February 7, 1866, during the Chincha Islands War, between a Spanish squadron and a combined Peruvian-Chilean fleet, at the island of Abtao in the Gulf of Ancud near Chiloé Archipelago in south-central Chile. It was limited to a long-range exchange of fire between the two squadrons, as the allied ships, anchored behind the island, were protected by shallow waters inaccessible to the Spanish ships, whose gunnery, nevertheless, proved more accurate and inflicted damage to the Chilean and Peruvian ships.

USS <i>Aroostook</i> (1861) Gunboat of the United States Navy

USS Aroostook was a Unadilla-class gunboat built for the Union Navy during the American Civil War. Aroostook was used by the Navy to patrol navigable waterways of the Confederacy to prevent the South from trading with other countries.

USRC <i>Levi Woodbury</i>

USRC Levi Woodbury was a Pawtuxet-class screw steam revenue cutter built for the United States Revenue Cutter Service during the American Civil War. Built in 1863–64, she became one of the longest-serving revenue cutters in the Service's history, and was the oldest active-duty ship in U.S. government service by the end of her 51-year career.

USS <i>Violet</i> Gunboat of the United States Navy

USS Violet was a 166-ton steamer acquired by the U.S. Navy for use during the American Civil War.

French weapons in the American Civil War had a key role in the conflict and encompassed most of the sectors of weaponry of the American Civil War (1861–1865), from artillery to firearms, submarines and ironclad warships. The effect of French weapons was especially significant in field artillery and infantry. These weapons were either American productions based on French designs, or sometimes directly imported from France.

USS <i>Despatch</i> (1873) 1873–1891 American steamer ship

The third USS Despatch was a United States Navy steamer in commission from 1873 to 1891.

Chilean corvette <i>Abtao</i> Ship launched in 1863

The corvette Abtao was a wooden ship built in Scotland during 1864 of 1.600 tons and 800 IHP. She fought in the War of the Pacific and was in service for the Chilean Navy until 1922.

CSS <i>Tuscaloosa</i> (ironclad)

CSS Tuscaloosa was an ironclad warship that served in the Confederate States Navy during the American Civil War. Construction began in May 1862, under a contract with Henry D. Bassett. Her engines were taken from the steamboat Chewala, and she was armored with 4 inches (10 cm) of iron and armed with four cannons. In January 1863, she was launched, and traveled down to Mobile, Alabama for service on Mobile Bay. Both Tuscaloosa and her sister ship CSS Huntsville were found to be too slow for practical use, and were relegated to service as floating batteries. Union forces captured Mobile in April 1865, and Tuscaloosa was scuttled on April 12, as she was unable to escape due to an inability to steam against the current on the Spanish River. Her wreck was discovered in the 1980s.

<span class="mw-page-title-main">Gustavus H. Scott</span> United States Navy admiral (1812–1882)

Gustavus Hall Scott was an officer in the United States Navy who served in the Second Seminole War and the American Civil War. He rose to the rank of rear admiral and late in his career was commander-in-chief of the North Atlantic Squadron.

<i>Huntsville</i>-class ironclad

The Huntsville-class ironclads consisted of two casemate ironclads ordered by the Confederate States Navy in 1862 to defend Mobile, Alabama, during the American Civil War. Completed the following year, they used propulsion machinery taken from steamboats, and were intended to be armored with 4 inches (102 mm) of wrought iron and armed with four cannons. Both CSS Tuscaloosa and her sister ship CSS Huntsville were found to be too slow for practical use, and were relegated to service as floating batteries. Union forces captured Mobile in April 1865, and the sisters were scuttled on April 12, as they were unable to escape due to an inability to steam against the current on the Spanish River.

<span class="mw-page-title-main">Joseph Fry (captain)</span> Confederate officer (1826–1873)

Joseph Fry was a former U.S. Naval Officer, Confederate Civil War veteran, and commander of the ill-fated Virginius.

Spanish frigate <i>Gerona</i> Spanish Navy screw frigate of 1865–1899

Gerona was a Spanish Navy screw frigate in commission from 1865 to 1899. She took part in combat operations during the Chincha Islands War, the Ten Years' War, and the First Melillan Campaign. She was named for Girona, a city in Catalonia in northeastern Spain.

References

  1. 1 2 3 4 5 6 7 8 Christian de Saint Hubert, "The Early Spanish Steam Warships 1834-1870". Warship International 1983.
  2. Hagan, p. 180
  3. Albertson, p. 17
  4. Jack Greene, Alessandro Massignani, p. 275
  5. 1 2 3 4 5 6 7 8 9 10 11 "When Liverpool Was Dixie". www.whenliverpoolwasdixie.co.uk. Archived from the original on March 23, 2012.
  6. 1 2 3 McKenna, p. 163.
  7. 1 2 McKenna, p. 164.
  8. Website of the Chilean Navy Abtao, corbeta (1º) Archived 2012-05-16 at the Wayback Machine , retrieved on 6 December 2011
  9. Bentinck, p. 30.
  10. Bentinck p.9
  11. Urrutia, p. 320.
  12. Graham, p. 62.
  13. 1 2 Sondhaus, p. 98.
  14. 1 2 3 4 5 House of Commons, p. 18.
  15. Greene, p. 276.
  16. Appletons' annual cyclopaedia and register of important events, p. 688.
  17. 1 2 3 4 Rhodes, p. 93.
  18. Universitat de Barcelona. Centre d'Estudis Històrics Internacionals, p. 226.

Sources