Civil War tokens are token coins that were privately minted and distributed in the United States between 1861 and 1864. They were used mainly in the Northeast and Midwest. The widespread use of the tokens was a result of the scarcity of government-issued cents during the Civil War.
Civil War tokens became illegal after the United States Congress passed a law on April 22, 1864, prohibiting the issue of any one or two-cent coins, tokens or devices for use as currency. On June 8, 1864, an additional law was passed that forbade all private coinage. [1]
Civil War tokens are divided into three types: store cards, patriotic tokens, and sutler tokens. All three types were utilized as currency, and are differentiated by their designs. The collectible value of the tokens is primarily determined by their condition and rarity.
By 1862, the second year of the Civil War, government-issued coinage began vanishing from circulation. American citizens hoarded all coins with gold and silver, and eventually began hoarding copper-nickel cents as well. This made it extremely difficult for businesses to conduct transactions. In response, many merchants turned to private minters to fill the void left by the hoarded coins. The first of these privately minted tokens appeared in the autumn of 1862, by H. A. Ratterman, in Cincinnati, Ohio. New York issues followed in the spring of 1863, first with Lindenmueller currency store card tokens issued by New York City barkeep Gustavus Lindenmueller and then with Knickerbocker currency patriotic tokens issued by William H. Bridgens. It is estimated that by 1864, there were 25,000,000 Civil War tokens (nearly all redeemable for one cent) in circulation, consisting of approximately 7,000–8,000 varieties. [2]
Lindenmueller tokens are one of the best-known and commonly struck types. They served as store cards (advertisements) for Lindenmueller and he had more than one million of these one-cent tokens struck and placed into circulation in 1863. One of the common uses for the token was for streetcar fare. The Third Avenue Railroad company of New York, which had willingly accepted a large quantity of the Lindenmueller tokens in lieu of actual currency, asked Lindenmueller to redeem them. He refused, and the railroad had no legal recourse. Incidents such as these eventually forced the government to intervene. [3]
On April 22, 1864, Congress enacted the Coinage Act of 1864. While the act is most remembered for the introduction of the phrase "In God We Trust" on the newly created two-cent piece, it also effectively ended the usage of Civil War tokens. In addition to authorizing the minting of the two-cent piece, the act changed the composition of the one-cent piece from a copper-nickel alloy (weighing 4.67 grams) to a lighter, less thick piece composed of 95% copper (weighing 3.11 grams). [4] The new one-cent piece was much closer in weight to the Civil War tokens, and found greater acceptance among the public. [5]
While the Coinage Act made Civil War tokens impractical, the issue of their legality was decided on June 8, 1864, when Congress enacted 18 U.S.C. § 486, which made the minting and usage of non-government issued coins punishable by a fine of up to $2,000, (~$30,610 in 2022) a prison term of up to five years, or both. (Chapter 25 of Title 18 deals specifically with counterfeit and forgery). It did not make it illegal to own Civil War tokens. Evidence exists that the tokens were viewed as collectibles as early as 1863, when the first known listings of Civil War tokens were published. [2]
Civil War tokens have been extensively cataloged by Fuld [2] and his numbering of types is the standard.
Patriotic Civil War tokens typically displayed a patriotic slogan or image on one or both sides. Since the majority of these tokens were minted in Union states, the slogans and images were decidedly pro-Union. Some common examples of slogans found on patriotic tokens are "The Union Must and Shall Be Preserved" [6] , "Union For Ever", [7] and "Old Glory". Some of the images found on patriotic tokens were the flag of the United States, a 19th-century cannon, and the USS Monitor. [8]
Among the best-known varieties of patriotic tokens are the so-called "Dix tokens." They are named for John Adams Dix, who served as Secretary of the Treasury in 1861. [9] In a letter from Dix to a revenue cutter captain, Lieutenant Caldwell, he ordered Caldwell to relieve another cutter captain of his command for refusing an order to transfer from New Orleans to New York City. The letter ends with the following sentence: "If any one attempts to haul down the American flag, shoot him on the spot." The quote found its way to a number of patriotic tokens, albeit with a slightly modified wording ("haul down" is usually replaced by "tear it down"). [10]
Civil War store cards advertised the name and/or location of privately owned businesses. [11] Businesses that could afford it had two custom dies made, with both advertising the business. Otherwise, only one side displayed the business's information.
Sutler tokens are similar to store cards. Rather than listing the name of a private business, however, these tokens bore the name of a particular army unit (usually a regiment) and the name of the sutler who conducted transactions with the regiment. [12] Of the three types of Civil War tokens, sutler tokens are by far the rarest.
There are several factors that determine the collectible value of Civil War tokens including condition and rarity. Rarity is measured on a scale from 1 to 10 (1 being the most common type). The scale was developed by noted numismatic dealer and writer George Fuld.
The material used to mint Civil War tokens can also affect collectability. Civil war tokens were minted using a variety of materials, copper being a common choice (often actually bronze). Other materials used for minting were nickel, tin, German silver, white metal, and silver. Examples of tokens minted using rubber are also known to exist. [2]
In 1967 the Civil War Token Society was founded by a group of collectors for the purpose of "stimulat[ing] interest and research in the field of Civil War token collecting." The society publishes a quarterly journal, The Civil War Token Journal, maintains a library, and conducts quarterly mail auctions. [13]
Coins of the United States dollar, aside from those of the earlier Continental currency were first minted in 1792. New coins have been produced annually and they make up a valuable aspect of the United States currency system. Circulating coins exist in denominations of 1¢, 5¢, 10¢, 25¢, 50¢, and $1.00. Also minted are bullion, including gold, silver and platinum, and commemorative coins. All of these are produced by the United States Mint. The coins are then sold to Federal Reserve Banks which in turn are responsible for putting coins into circulation and withdrawing them as demanded by the country's economy.
A nickel, sometimes mistakenly called a nickle, is a five-cent coin struck by the United States Mint. Composed of cupronickel, the piece has been issued since 1866. Its diameter is 0.835 inches (21.21 mm) and its thickness is 0.077 inches (1.95 mm).
The two-cent piece was produced by the Mint of the United States for circulation from 1864 to 1872 and for collectors in 1873. Designed by James B. Longacre, there were decreasing mintages each year, as other minor coins such as the nickel proved more popular. It was abolished by the Mint Act of 1873.
Exonumia are numismatic items other than coins and paper money. This includes "Good For" tokens, badges, counterstamped coins, elongated coins, encased coins, souvenir medallions, tags, wooden nickels and other similar items. It is an aspect of numismatics and many coin collectors are also exonumists.
The United States three cent piece was a unit of currency equaling 3⁄100 of a United States dollar. The mint produced two different three-cent coins for circulation: the three-cent silver and the three-cent nickel. Additionally, a three-cent bronze coin was made as a pattern in 1863. During the period from 1865 to 1873, both coins were minted, albeit in very small quantities for the silver three-cent piece.
In Canada, a penny is an out-of-production coin worth one cent, or 1⁄100 of a dollar. According to the Royal Canadian Mint, the official term for the coin is the one-cent piece, but in practice the terms penny and cent predominate. Penny was likely readily adopted because the previous coinage in Canada was the British monetary system, where Canada used British pounds, shillings, and pence as coinage alongside U.S. decimal coins and Spanish milled dollars.
The Indian Head cent, also known as an Indian Head penny, was a one-cent coin ($0.01) produced by the United States Bureau of the Mint from 1859 to 1909. It was designed by James Barton Longacre, the Chief Engraver at the Philadelphia Mint.
This glossary of numismatics is a list of definitions of terms and concepts relevant to numismatics and coin collecting, as well as sub-fields and related disciplines, with concise explanations for the beginner or professional.
The Confederate States dollar was first issued just before the outbreak of the American Civil War by the newly formed Confederacy. It was not backed by hard assets, but simply by a promise to pay the bearer after the war, on the prospect of Southern victory and independence. As the Civil War progressed and victory for the South seemed less and less likely, its value declined. After the Confederacy's defeat, its money had no value, and individuals and banks lost large sums.
In numismatics, token coins or trade tokens are coin-like objects used instead of coins. The field of token coins is part of exonumia and token coins are token money. Their denomination is shown or implied by size, color or shape. They are often made of cheaper metals like copper, pewter, aluminium, brass and tin, or non-metals like bakelite, leather and porcelain.
The Flying Eagle cent is a one-cent piece struck by the Mint of the United States as a pattern coin in 1856 and for circulation in 1857 and 1858. The coin was designed by Mint Chief Engraver James B. Longacre, with the eagle in flight based on the work of Longacre's predecessor, Christian Gobrecht.
Upper Canada had a short history as a coin-issuing entity.
The Shield nickel was the first United States five-cent piece to be made out of copper-nickel, the same alloy of which American nickels are struck today. Designed by James B. Longacre, the coin was issued from 1866 until 1883, when it was replaced by the Liberty Head nickel. The coin takes its name from the motif on its obverse, and was the first five-cent coin referred to as a "nickel"—silver pieces of that denomination had been known as half dimes.
Canada has an extensive history with regard to its currencies. Prior to European contact, indigenous peoples in Canada used items such as wampum and furs for trading purposes, which continued when trade with Europeans began. During the period of French colonization, coins were introduced, as well as one of the first examples of paper currency by a western government. During the period of British colonization, additional coinage was introduced, as well as banknotes. The Canadian colonies gradually moved away from the British pound and adopted currencies linked to the United States dollar. With Confederation in 1867, the Canadian dollar was established. By the mid-20th century, the Bank of Canada was the sole issuer of paper currency, and banks ceased to issue banknotes.
The Feuchtwanger cent was a nickel silver private token coin circulated in the U.S. by Lewis Feuchtwanger during the 1830s and 1840s. Three-cent varieties were also available, though not as plentiful as the one-cent tokens.
Conder tokens, also known as 18th-century provincial tokens, were a form of privately minted token coinage struck and used during the later part of the 18th century and the early part of the 19th century in England, Anglesey and Wales, Scotland, and Ireland.
Hard-times tokens are American large or half cent-sized copper tokens, struck from about 1833 through 1843, serving as unofficial currency. These privately made pieces, comprising merchant, political and satirical pieces, were used during a time of political and financial crisis in the United States.
The copper-nickel three-cent piece, often called a three-cent nickel piece or three-cent nickel, was designed by US Mint Chief Engraver James B. Longacre and struck by the United States Bureau of the Mint from 1865 to 1889. It was initially popular, but its place in commerce was supplanted by the five-cent piece, or nickel.
The three-cent silver, also known as the three-cent piece in silver or trime, was struck by the Mint of the United States for circulation from 1851 to 1872, and as a proof coin in 1873. Designed by the Mint's chief engraver, James B. Longacre, it circulated well while other silver coinage was being hoarded and melted, but once that problem was addressed, became less used. It was abolished by Congress with the Coinage Act of 1873.
The two-cent billon was a pattern US coin struck in 1836 and initially proposed as part of the Act of January 13, 1837. Versions exist with either a reeded edge and coin orientation or a plain edge and medal orientation; however, those with the former tend to be original strikes, whereas the latter are always proof restrikes.