The Lily, Stirling Range

Last updated

The Lily
The lily windmill.jpg
The Lily with Stirling Range
The Lily, Stirling Range
Origin
Mill nameThe Lily
Mill location Amelup, Western Australia
Coordinates 34°13′28″S118°12′57″E / 34.224423°S 118.215890°E / -34.224423; 118.215890
Year built1997
Information
PurposeFlour mill
TypeGround sail
Storeys5
No. of sails4
Type of sails Common sails
WindshaftOak with cast iron poll end
WindingTailpole and winch
No. of pairs of millstones1
Size of millstones1.4 metres (4 ft 7 in) diameter

The Lily, also known as The Lily Dutch Windmill, is a tower mill located near the towns of Amelup and Borden in the Great Southern region of Western Australia. [1] [2] [3] [4] [5] It is one of Australia's few working traditional windmills. [1] [3]

Contents

The Lily is a 16th-century Dutch design windmill of brick construction with 24.6-metre (81 ft) diameter sails. [6] It was built by Dutch born Pleun Hitzert between 1991 and 1997. [7] [8] The Lily is a flour mill equipped with one set of millstones. It is the only working windmill of traditional construction on mainland Australia. Its uniqueness in the Australian landscape combined with the proximity of the Stirling Range has made The Lily a popular tourist landmark. [5] [9] [10] [11] [12]

The Lily with Stirling Range The Lily windmill2.jpg
The Lily with Stirling Range

Design

View inside the cap of The Lily The Lily windmill inside cap.jpg
View inside the cap of The Lily

The design of The Lily is inspired by several windmills from the Netherlands but most notably by that of De Lelie (Dutch for "The Lily") located in Puttershoek. The tapering brick tower of The Lily is five storeys high and is of circular cross section. The tower measures in excess of 25 metres (82 ft) from the base of the footing to the cap bearing plate. The wall thickness varies between 550 millimetres (22 in) and 600 mm (24 in). [13] The cap has a mass of approximately 22 tonnes (22 long tons; 24 short tons) [6] [8] and is able to rotate through a full 360 degrees to face the wind. The Common sails are of welded steel stock construction with Russian larch latticework. [13] Canvas sails can be fitted over the latticework to catch more wind and improve the power the windmill can generate.

The Lily has 24.6-metre (81 ft) diameter sails with stocks constructed of welded steel rectangular sections. [13] In strong wind the sails can revolve at around 25 rpm, at which speed the sail tips are travelling at more than 115 kilometres per hour (71 mph). The Lily is equipped with one set of millstones for producing flour. Note that of the two millstones, only the top stone rotates. The gap between the stationary (bottom) stone and the top (rotating) stone can be manually controlled via a rope and pulley system and automatically via a centrifugal governor. [13]

Gear train

As in many windmills, The Lily features two sets of gears between the sails and the millstones. The first one is between the brake wheel and the wallower which have 63 and 29 teeth respectively. The second gear is formed by the great spur wheel and the stone nut which have 66 and 23 teeth respectively. The number of teeth in each gear has been designed to be coprime to ensure even wear and smooth running of these gears. Both gears together provide a speed increasing gear ratio between sails and millstone of ≈6.2. This means that one complete revolution of the sails causes approximately 6.2 revolutions of the (top) millstone.

cross section of The Lily Cross section the Lily.png
cross section of The Lily

Brake

The Lily features a Flemish brake design which incorporates a rope drum which lifts a loaded lever which in turn pulls a set of wooden blocks tightly around the windshaft (the shaft the sails are mounted on). This brake design which is similar to a band brake is very effective when the sails are facing the wind, but much less so when the wind is coming from behind. For this reason a ‘kneppel’ is installed which prevents counter-rotation of the sails when the windmill has stopped.

Windshaft bearings

The rotating assembly of stocks, sails, windshaft, brake wheel etc. is supported on two bearings. The neck bearing supports by far the largest fraction of the weight. This is a plain bearing which supports the majority of the vertical component of the weight of the rotating assembly. The bearing block is of solid brass construction and is lubricated with animal fat. The shaft lays in a shallow groove of the neck bearing block and is kept in position by the weight of the rotating assembly. The tail bearing supports the remainder of the vertical weight and any (horizontal) thrust generated by the wind. The neck bearing does not react to any thrust forces.

Construction

All the main parts of The Lily except the millstones have been constructed in the period between 1991 and 1997 virtually single-handedly by Pleun Hitzert. [1] In preparation for building The Lily, Pleun travelled to the Netherlands to work with experienced millwrights in order to learn how to operate and build a windmill. Even though the windmill was essentially complete in 1997, no millstones were fitted at that time. This was because at that time The Lily restaurant and cafe occupied the bottom three floors of the windmill. It wasn’t until a new restaurant (housed in the re-constructed Gnowangerup railway station building) was constructed next to the windmill that the flour milling equipment could be fitted in the windmill. This work was carried out in 2003 after which The Lily produced its first flour, [9] from grains grown on the property that surrounds the mill. [14]

Millstone in The Lily Mill stone in the Lily windmill.jpg
Millstone in The Lily

Recycled material use

Extensive use has been made of recycled materials for the construction of The Lily. [13]

The brick tower of The Lily windmill under construction The Lily tower construction.jpg
The brick tower of The Lily windmill under construction

Operation

The Lily can be operated by one person, but during milling the assistance of a second person is desirable. Due to its location The Lily can mill flour during most times of the year, as good winds are frequently available. Although the milling stones can be used to mill a large variety of wheat, it is almost exclusively used to produce spelt flour. [1] [10] [15]

See also

Related Research Articles

<span class="mw-page-title-main">Mount Pleasant Mill</span>

Mount Pleasant Mill is a windmill north of Kirton in Lindsey on the North Cliff Road in North Lincolnshire in the east of England.

<span class="mw-page-title-main">Upminster Windmill</span>

Upminster Windmill is a Grade II* listed smock mill located in Upminster in the London Borough of Havering, England. It was formerly known as Abraham's Mill and was in Essex when built. It has been restored and is a museum open to the public at selected times.

<span class="mw-page-title-main">High Salvington Windmill</span> Post mill in High Salvington, West Sussex, England

Durrington or High Salvington Windmill is a Grade II listed post mill in High Salvington, Sussex that has been restored and is in full working order. The mill stands 320 feet (98 m) above sea level and is able to take advantage of incoming sea winds.

<span class="mw-page-title-main">New Mill, Willesborough</span>

New Mill is a Grade II* listed smock mill in Hythe Road, Willesborough, Ashford, Kent. It stands just west of junction 10 of the M20 motorway. It was built in 1869 and is now a museum open to the public.

<span class="mw-page-title-main">Mostert's Mill</span> Historic windmill in Cape Town, South Africa

Mostert's Mill is a historic windmill in Mowbray, Cape Town, South Africa. It was built in 1796 and was, until it was gutted in a wildfire on 18 April 2021, the oldest surviving complete windmill in South Africa. The fire had started on Table Mountain and spread, severely damaging a number of buildings. The oldest windmill in South Africa is the De Nieuwe Molen mill in Cape Town, built in 1782.

<span class="mw-page-title-main">Glossary of mill machinery</span>

This glossary of mill machinery covers the major pieces of machinery to be found in windmills, watermills and horse mills. It does not cover machinery found in modern factories.

<span class="mw-page-title-main">Bocking Windmill</span>

Bocking Windmill or Bocking Churchstreet Windmill is a grade I listed post mill at Bocking, Essex, England which has been restored.

<span class="mw-page-title-main">Fryerning Mill</span>

Fryerning Mill is a grade II* listed post mill at Mill Green, Fryerning, Essex, which has been restored.

<span class="mw-page-title-main">South Ockendon Windmill</span>

South Ockendon Windmill was a Smock mill at South Ockendon, Essex, England which collapsed on 2 November 1977.

Debden Windmill is a grade II listed Tower mill at Debden, Essex, England which has been converted to residential use.

<span class="mw-page-title-main">Webster's Mill, Framsden</span>

Framsden Windmill is a Grade II* listed post mill at Framsden, Suffolk, England which is preserved. The mill was known as Webster's Mill when it was a working mill.

<span class="mw-page-title-main">De Sterrenberg, Nijeveen</span> Windmill in Drenthe, the Netherlands

De Sterrenberg is a smock mill in Nijeveen, Drenthe the Netherlands. It was built in 1977. The mill is listed as a Rijksmonument, number 30957.

<span class="mw-page-title-main">De Zwaluw, Burdaard</span>

De Zwaluw is a smock mill in Burdaard, Friesland, Netherlands which is working commercially. The mill is listed as a Rijksmonument, number 15585.

<span class="mw-page-title-main">De Hoop, Norg</span> Dutch windmill

De Hoop is a smock mill in Norg, Drenthe, the Netherlands. It was built in 1857 and is listed as a Rijksmonument, number 30781.

<span class="mw-page-title-main">Noordenveld, Norg</span>

Noordenveld is a smock mill in Norg, Drenthe, the Netherlands. It was built in 1878 and is listed as a Rijksmonument, number 30785.

<span class="mw-page-title-main">Molen van Rolde</span>

The Molen van Rolde is a smock mill in Rolde, Drenthe, the Netherlands. The mill was built in 1873 and is listed as a Rijksmonument, number 32698.

<span class="mw-page-title-main">Grafelijke Korenmolen, Zeddam</span>

The Grafelijke Korenmolen van Zeddam is a tower mill in Zeddam, the Netherlands, which has been restored to working order. The mill may have been built before 1441, making it the oldest windmill in existence in the Netherlands. It is listed as Rijksmonument number 9290.

<span class="mw-page-title-main">De Buitenmolen, Zevenaar</span> Tower mill in Zevenaar, Netherlands

The Buitenmolen is a tower mill in Zevenaar, Netherlands that was restored to working order in 1970. The mill was built in the beginning of the sixteenth century and is listed as a Rijksmonument, number 40427.

<span class="mw-page-title-main">Tot Voordeel en Genoegen</span> Dutch windmill

Tot Voordeel en Genoegen is a windmill built in 1798 on the Molendijk 15 in Alphen, Netherlands. It is a large post mill, built above a roundhouse, used for grinding wheat flour. It is the only windmill in the Netherlands that drives three pairs of millstones. The mechanism is mostly wooden, since iron was expensive when it was built. The windmill, which is still functional, can be rotated on its post to face the wind for maximum effect.

<span class="mw-page-title-main">Veldkamps Meuln</span>

Veldkamps Meuln is a 19th-century tower mill in the village of Bellingwolde in the Netherlands.

References

  1. 1 2 3 4 "Miller's Tale". The Australian . News Corporation. 2 December 2006. Retrieved 24 November 2015.
  2. "Daar bij die molen... in Australië (in Dutch)". Algemeen Dagblad. 23 February 2007. Retrieved 24 November 2015.
  3. 1 2 "Borden, WA". Aussie Towns. Retrieved 24 November 2015.
  4. "The Lily – Shire of Gnowangerup". Heritage Council of Western Australia. 8 February 2015. Retrieved 24 November 2015.
  5. 1 2 3 "Icons". Shire of Gnowangerup . Retrieved 24 November 2015.
  6. 1 2 "The Lily Dutch Windmill – Stirling Range". Scoop. Retrieved 24 November 2015.
  7. Mark Berry (1 October 2015). "Windmills of Australia" . Retrieved 24 November 2014.
  8. 1 2 "Top 10 things to do in the Stirlings". Australia's South West. 2015. Retrieved 24 November 2015.
  9. 1 2 "The Lily Windmill Cafe". Mietta's. Retrieved 24 November 2015.
  10. 1 2 "3 country getaways in Western Australia". NewsLifeMedia. 2015. Retrieved 24 November 2015.
  11. Terry Carter, Lara Dunston & Rebecca Chau (2007). Perth and Western Australia . Lonely Planet. p.  140. ISBN   978-1-74104-539-0. pleun hitzert.
  12. Alex James (17 February 2014). "Windmill craftmanship at its best". The Telegraph . Retrieved 24 November 2015.
  13. 1 2 3 4 5 "The Lily Dutch Windmill specifications". The Lily Dutch Windmill. Retrieved 24 November 2015.
  14. Matthew Evans (16 February 2008). "Discover the Great Southern". Sydney Morning Herald . Retrieved 24 November 2015.
  15. Tara de Landgrafft , Bridget Fitzgerald , Lucinda Jose , Lucie Bell and Tyne McConnon (24 December 2014). "Producers tell how to create a cracking West Australian Christmas feast". Australian Broadcasting Corporation . Retrieved 24 November 2015.{{cite web}}: CS1 maint: multiple names: authors list (link)