Topological geometry

Last updated

Topological geometry deals with incidence structures consisting of a point set and a family of subsets of called lines or circles etc. such that both and carry a topology and all geometric operations like joining points by a line or intersecting lines are continuous. As in the case of topological groups, many deeper results require the point space to be (locally) compact and connected. This generalizes the observation that the line joining two distinct points in the Euclidean plane depends continuously on the pair of points and the intersection point of two lines is a continuous function of these lines.

Contents

Linear geometries

Linear geometries are incidence structures in which any two distinct points and are joined by a unique line . Such geometries are called topological if depends continuously on the pair with respect to given topologies on the point set and the line set. The dual of a linear geometry is obtained by interchanging the roles of points and lines. A survey of linear topological geometries is given in Chapter 23 of the Handbook of incidence geometry. [1] The most extensively investigated topological linear geometries are those which are also dual topological linear geometries. Such geometries are known as topological projective planes.

History

A systematic study of these planes began in 1954 with a paper by Skornyakov. [2] Earlier, the topological properties of the real plane had been introduced via ordering relations on the affine lines, see, e.g., Hilbert, [3] Coxeter, [4] and O. Wyler. [5] The completeness of the ordering is equivalent to local compactness and implies that the affine lines are homeomorphic to and that the point space is connected. Note that the rational numbers do not suffice to describe our intuitive notions of plane geometry and that some extension of the rational field is necessary. In fact, the equation for a circle has no rational solution.

Topological projective planes

The approach to the topological properties of projective planes via ordering relations is not possible, however, for the planes coordinatized by the complex numbers, the quaternions or the octonion algebra. [6] The point spaces as well as the line spaces of these classical planes (over the real numbers, the complex numbers, the quaternions, and the octonions) are compact manifolds of dimension .

Topological dimension

The notion of the dimension of a topological space plays a prominent rôle in the study of topological, in particular of compact connected planes. For a normal space , the dimension can be characterized as follows:

If denotes the -sphere, then if, and only if, for every closed subspace each continuous map has a continuous extension .

For details and other definitions of a dimension see [7] and the references given there, in particular Engelking [8] or Fedorchuk. [9]

2-dimensional planes

The lines of a compact topological plane with a 2-dimensional point space form a family of curves homeomorphic to a circle, and this fact characterizes these planes among the topological projective planes. [10] Equivalently, the point space is a surface. Early examples not isomorphic to the classical real plane have been given by Hilbert [3] [11] and Moulton. [12] The continuity properties of these examples have not been considered explicitly at that time, they may have been taken for granted. Hilbert’s construction can be modified to obtain uncountably many pairwise non-isomorphic -dimensional compact planes. The traditional way to distinguish from the other -dimensional planes is by the validity of Desargues’s theorem or the theorem of Pappos (see, e.g., Pickert [13] for a discussion of these two configuration theorems). The latter is known to imply the former (Hessenberg [14] ). The theorem of Desargues expresses a kind of homogeneity of the plane. In general, it holds in a projective plane if, and only if, the plane can be coordinatized by a (not necessarily commutative) field, [3] [15] [13] hence it implies that the group of automorphisms is transitive on the set of quadrangles ( points no of which are collinear). In the present setting, a much weaker homogeneity condition characterizes :

Theorem. If the automorphism group of a -dimensional compact plane is transitive on the point set (or the line set), then has a compact subgroup which is even transitive on the set of flags (=incident point-line pairs), and is classical. [10]

The automorphism group of a -dimensional compact plane , taken with the topology of uniform convergence on the point space, is a locally compact group of dimension at most , in fact even a Lie group. All -dimensional planes such that can be described explicitly; [10] those with are exactly the Moulton planes, the classical plane is the only -dimensional plane with ; see also. [16]

Compact connected planes

The results on -dimensional planes have been extended to compact planes of dimension . This is possible due to the following basic theorem:

Topology of compact planes.If the dimension of the point space of a compact connected projective plane is finite, then with . Moreover, each line is a homotopy sphere of dimension , see [17] or. [18]

Special aspects of 4-dimensional planes are treated in, [19] more recent results can be found in. [20] The lines of a -dimensional compact plane are homeomorphic to the -sphere; [21] in the cases the lines are not known to be manifolds, but in all examples which have been found so far the lines are spheres. A subplane of a projective plane is said to be a Baer subplane, [22] if each point of is incident with a line of and each line of contains a point of . A closed subplane is a Baer subplane of a compact connected plane if, and only if, the point space of and a line of have the same dimension. Hence the lines of an 8-dimensional plane are homeomorphic to a sphere if has a closed Baer subplane. [23]

Homogeneous planes.If is a compact connected projective plane and if is transitive on the point set of , then has a flag-transitive compact subgroup and is classical, see [24] or. [25] In fact, is an elliptic motion group. [26]

Let be a compact plane of dimension , and write . If , then is classical, [27] and is a simple Lie group of dimension respectively. All planes with are known explicitly. [28] The planes with are exactly the projective closures of the affine planes coordinatized by a so-called mutation of the octonion algebra , where the new multiplication is defined as follows: choose a real number with and put . Vast families of planes with a group of large dimension have been discovered systematically starting from assumptions about their automorphism groups, see, e.g.,. [20] [29] [30] [31] [32] Many of them are projective closures of translation planes (affine planes admitting a sharply transitive group of automorphisms mapping each line to a parallel), cf.; [33] see also [34] for more recent results in the case and [30] for .

Compact projective spaces

Subplanes of projective spaces of geometrical dimension at least 3 are necessarily Desarguesian, see [35] §1 or [4] §16 or. [36] Therefore, all compact connected projective spaces can be coordinatized by the real or complex numbers or the quaternion field. [37]

Stable planes

The classical non-euclidean hyperbolic plane can be represented by the intersections of the straight lines in the real plane with an open circular disk. More generally, open (convex) parts of the classical affine planes are typical stable planes. A survey of these geometries can be found in, [38] for the -dimensional case see also. [39]

Precisely, a stable plane is a topological linear geometry such that

  1. is a locally compact space of positive finite dimension,
  2. each line is a closed subset of , and is a Hausdorff space,
  3. the set is an open subspace ( stability),
  4. the map is continuous.

Note that stability excludes geometries like the -dimensional affine space over or .

A stable plane is a projective plane if, and only if, is compact. [40]

As in the case of projective planes, line pencils are compact and homotopy equivalent to a sphere of dimension , and with , see [17] or. [41] Moreover, the point space is locally contractible. [17] [42]

'Compact groups of (proper) stable planes are rather small. Let denote a maximal compact subgroup of the automorphism group of the classical -dimensional projective plane . Then the following theorem holds:
If a -dimensional stable plane admits a compact group of automorphisms such that , then , see. [43]

Flag-homogeneous stable planes.Let be a stable plane. If the automorphism group is flag-transitive, then is a classical projective or affine plane, or is isomorphic to the interior of the absolute sphere of the hyperbolic polarity of a classical plane; see. [44] [45] [46]

In contrast to the projective case, there is an abundance of point-homogeneous stable planes, among them vast classes of translation planes, see [33] and. [47]

Symmetric planes

Affine translation planes have the following property:

More generally, a symmetric plane is a stable plane satisfying the aforementioned condition; see, [48] cf. [49] for a survey of these geometries. By [50] Corollary 5.5, the group is a Lie group and the point space is a manifold. It follows that is a symmetric space. By means of the Lie theory of symmetric spaces, all symmetric planes with a point set of dimension or have been classified. [48] [51] They are either translation planes or they are determined by a Hermitian form . An easy example is the real hyperbolic plane.

Circle geometries

Classical models [52] are given by the plane sections of a quadratic surface in real projective -space; if is a sphere, the geometry is called a Möbius plane. [39] The plane sections of a ruled surface (one-sheeted hyperboloid) yield the classical Minkowski plane, cf. [53] for generalizations. If is an elliptic cone without its vertex, the geometry is called a Laguerre plane. Collectively these planes are sometimes referred to as Benz planes. A topological Benz plane is classical, if each point has a neighbourhood which is isomorphic to some open piece of the corresponding classical Benz plane. [54]

Möbius planes

Möbius planes consist of a family of circles, which are topological 1-spheres, on the -sphere such that for each point the derived structure is a topological affine plane. [55] In particular, any distinct points are joined by a unique circle. The circle space is then homeomorphic to real projective -space with one point deleted. [56] A large class of examples is given by the plane sections of an egg-like surface in real -space.

Homogeneous Möbius planes

If the automorphism group of a Möbius plane is transitive on the point set or on the set of circles, or if , then is classical and , see. [57] [58]

In contrast to compact projective planes there are no topological Möbius planes with circles of dimension , in particular no compact Möbius planes with a -dimensional point space. [59] All 2-dimensional Möbius planes such that can be described explicitly. [60] [61]

Laguerre planes

The classical model of a Laguerre plane consists of a circular cylindrical surface in real -space as point set and the compact plane sections of as circles. Pairs of points which are not joined by a circle are called parallel. Let denote a class of parallel points. Then is a plane , the circles can be represented in this plane by parabolas of the form .

In an analogous way, the classical -dimensional Laguerre plane is related to the geometry of complex quadratic polynomials. In general, the axioms of a locally compact connected Laguerre plane require that the derived planes embed into compact projective planes of finite dimension. A circle not passing through the point of derivation induces an oval in the derived projective plane. By [62] or, [63] circles are homeomorphic to spheres of dimension or . Hence the point space of a locally compact connected Laguerre plane is homeomorphic to the cylinder or it is a -dimensional manifold, cf. [64] A large class of -dimensional examples, called ovoidal Laguerre planes, is given by the plane sections of a cylinder in real 3-space whose base is an oval in .

The automorphism group of a -dimensional Laguerre plane () is a Lie group with respect to the topology of uniform convergence on compact subsets of the point space; furthermore, this group has dimension at most . All automorphisms of a Laguerre plane which fix each parallel class form a normal subgroup, the kernel of the full automorphism group. The -dimensional Laguerre planes with are exactly the ovoidal planes over proper skew parabolae. [65] The classical -dimensional Laguerre planes are the only ones such that , see, [66] cf. also. [67]

Homogeneous Laguerre planes

If the automorphism group of a -dimensional Laguerre plane is transitive on the set of parallel classes, and if the kernel is transitive on the set of circles, then is classical, see [68] [67] 2.1,2.

However, transitivity of the automorphism group on the set of circles does not suffice to characterize the classical model among the -dimensional Laguerre planes.

Minkowski planes

The classical model of a Minkowski plane has the torus as point space, circles are the graphs of real fractional linear maps on . As with Laguerre planes, the point space of a locally compact connected Minkowski plane is - or -dimensional; the point space is then homeomorphic to a torus or to , see. [69]

Homogeneous Minkowski planes

If the automorphism group of a Minkowski plane of dimension is flag-transitive, then is classical. [70]

The automorphism group of a -dimensional Minkowski plane is a Lie group of dimension at most . All -dimensional Minkowski planes such that can be described explicitly. [71] The classical -dimensional Minkowski plane is the only one with , see. [72]

Notes

  1. Grundhöfer & Löwen 1995
  2. Skornyakov, L.A. (1954), "Topological projective planes", Trudy Moskov. Mat. Obschtsch., 3: 347–373
  3. 1 2 3 Hilbert 1899
  4. 1 2 Coxeter, H.S.M. (1993), The real projective plane, New York: Springer
  5. Wyler, O. (1952), "Order and topology in projective planes", Amer. J. Math., 74 (3): 656–666, doi:10.2307/2372268, JSTOR   2372268
  6. Conway, J.H.; Smith, D.A. (2003), On quaternions and octonions: their geometry, arithmetic, and symmetry, Natick, MA: A K Peters
  7. Salzmann et al. 1995 , §92
  8. Engelking, R. (1978), Dimension theory, North-Holland Publ. Co.
  9. Fedorchuk, V.V. (1990), "The fundamentals of dimension theory", Encycl. Math. Sci., Berlin: Springer, 17: 91–192
  10. 1 2 3 Salzmann 1967
  11. Stroppel, M. (1998), "Bemerkungen zur ersten nicht desarguesschen ebenen Geometrie bei Hilbert", J. Geom., 63 (1–2): 183–195, doi:10.1007/bf01221248, S2CID   120078708
  12. Moulton, F.R. (1902), "A simple non-Desarguesian plane geometry", Trans. Amer. Math. Soc., 3 (2): 192–195, doi: 10.1090/s0002-9947-1902-1500595-3
  13. 1 2 Pickert 1955
  14. Hessenberg, G. (1905), "Beweis des Desarguesschen Satzes aus dem Pascalschen", Math. Ann. (in German), 61 (2): 161–172, doi:10.1007/bf01457558, S2CID   120456855
  15. Hughes, D.R.; Piper, F.C. (1973), Projective planes, Berlin: Springer
  16. Salzmann et al. 1995 , Chapter 3
  17. 1 2 3 Löwen 1983a
  18. Salzmann et al. 1995 , 54.11
  19. Salzmann et al. 1995 , Chapter 7
  20. 1 2 Betten, Dieter (1997), "On the classification of 4-dimensional flexible projective planes", Mostly finite geometries (Iowa City, IA, 1996), Lecture Notes in Pure and Applied Mathematics, vol. 190, New York: Dekker, pp. 9–33, doi:10.1017/CBO9780511665608, MR   1463975
  21. Salzmann et al. 1995 , 53.15
  22. Salzmann, H. (2003), "Baer subplanes", Illinois J. Math., 47 (1–2): 485–513, doi: 10.1215/ijm/1258488168
  23. Salzmann et al. 1995 , 55.6
  24. Löwen, R. (1981), "Homogeneous compact projective planes", J. Reine Angew. Math., 321: 217–220
  25. Salzmann et al. 1995 , 63.8
  26. Salzmann et al. 1995 , 13.12
  27. Salzmann et al. 1995 , 72.8,84.28,85.16
  28. Salzmann et al. 1995 , 73.22,84.28,87.7
  29. Hähl, H. (1986), "Achtdimensionale lokalkompakte Translationsebenen mit mindestens -dimensionaler Kollineationsgruppe", Geom. Dedicata (in German), 21: 299–340, doi:10.1007/bf00181535, S2CID   116969491
  30. 1 2 Hähl, H. (2011), "Sixteen-dimensional locally compact translation planes with collineation groups of dimension at least ", Adv. Geom., 11: 371–380, doi:10.1515/advgeom.2010.046
  31. Hähl, H. (2000), "Sixteen-dimensional locally compact translation planes with large automorphism groups having no fixed points", Geom. Dedicata, 83: 105–117, doi:10.1023/A:1005212813861, S2CID   128076685
  32. Salzmann et al. 1995 , §§73,74,82,86
  33. 1 2 Knarr 1995
  34. Salzmann 2014
  35. Hilbert 1899 , §§22
  36. Veblen, O.; Young, J.W. (1910), Projective Geometry Vol. I, Boston: Ginn Comp.
  37. Kolmogoroff, A. (1932), "Zur Begründung der projektiven Geometrie", Ann. of Math. (in German), 33 (1): 175–176, doi:10.2307/1968111, JSTOR   1968111
  38. Salzmann et al. 1995 , §§3,4
  39. 1 2 Polster & Steinke 2001
  40. Salzmann et al. 1995 , 3.11
  41. Salzmann et al. 1995 , 3.28,29
  42. Grundhöfer & Löwen 1995 , 3.7
  43. Stroppel, M. (1994), "Compact groups of automorphisms of stable planes", Forum Math., 6 (6): 339–359, doi:10.1515/form.1994.6.339, S2CID   53550190
  44. Löwen 1983b.
  45. Salzmann et al. 1995 , 5.8
  46. Salzmann 2014 , 8.11,12
  47. Salzmann et al. 1995 , Chapters 7 and 8
  48. 1 2 Löwen, R. (1979), "Symmetric planes", Pacific J. Math., 84 (2): 367–390, doi: 10.2140/pjm.1979.84.367
  49. Grundhöfer & Löwen 1995 , 5.26-31
  50. Hofmann, K.H.; Kramer, L. (2015), "Transitive actions of locally compact groups on locally contractive spaces", J. Reine Angew. Math., 702: 227–243, 245/6
  51. Löwen, R. (1979), "Classification of -dimensional symmetric planes", Mathematische Zeitschrift, 167: 137–159, doi:10.1007/BF01215118, S2CID   123564207
  52. Steinke 1995
  53. Polster & Steinke 2001 , §4
  54. Steinke, G. (1983), "Locally classical Benz planes are classical", Mathematische Zeitschrift, 183: 217–220, doi:10.1007/bf01214821, S2CID   122877328
  55. Wölk, D. (1966), "Topologische Möbiusebenen", Mathematische Zeitschrift (in German), 93: 311–333, doi:10.1007/BF01111942
  56. Löwen, R.; Steinke, G.F. (2014), "The circle space of a spherical circle plane", Bull. Belg. Math. Soc. Simon Stevin, 21 (2): 351–364, doi: 10.36045/bbms/1400592630
  57. Strambach, K. (1970), "Sphärische Kreisebenen", Mathematische Zeitschrift (in German), 113: 266–292, doi:10.1007/bf01110328, S2CID   122982956
  58. Steinke 1995 , 3.2
  59. Groh, H. (1973), "Möbius planes with locally euclidean circles are flat", Math. Ann., 201 (2): 149–156, doi:10.1007/bf01359792, S2CID   122256290
  60. Strambach, K. (1972), "Sphärische Kreisebenen mit dreidimensionaler nichteinfacher Automorphismengruppe", Mathematische Zeitschrift (in German), 124: 289–314, doi:10.1007/bf01113922, S2CID   120716300
  61. Strambach, K. (1973), "Sphärische Kreisebenen mit einfacher Automorphismengruppe'", Geom. Dedicata (in German), 1: 182–220, doi:10.1007/bf00147520, S2CID   123023992
  62. Buchanan, T.; Hähl, H.; Löwen, R. (1980), "Topologische Ovale", Geom. Dedicata (in German), 9 (4): 401–424, doi:10.1007/bf00181558, S2CID   189889834
  63. Salzmann et al. 1995 , 55.14
  64. Steibke 1995 , 5.7
  65. Steinke 1995 , 5.5
  66. Steinke 1995 , 5.4,8
  67. 1 2 Steinke, G.F. (2002), "-dimensional elation Laguerre planes admitting non-solvable automorphism groups", Monatsh. Math., 136: 327–354, doi:10.1007/s006050200046, S2CID   121391952
  68. Steinke, G.F. (1993), "-dimensional point-transitive groups of automorphisms of - dimensional Laguerre planes", Results in Mathematics, 24: 326–341, doi:10.1007/bf03322341, S2CID   123334384
  69. Steinke 1991 , 4.6
  70. Steinke, G.F. (1992), "-dimensional Minkowski planes with large automorphism group", Forum Math., 4: 593–605, doi:10.1515/form.1992.4.593, S2CID   122970200
  71. Polster & Steinke 2001 , §4.4
  72. Steinke 1995 , 4.5 and 4.8

Related Research Articles

In mathematics, specifically in measure theory, a Borel measure on a topological space is a measure that is defined on all open sets. Some authors require additional restrictions on the measure, as described below.

In mathematics, a topological space is called separable if it contains a countable, dense subset; that is, there exists a sequence of elements of the space such that every nonempty open subset of the space contains at least one element of the sequence.

In mathematics, a gerbe is a construct in homological algebra and topology. Gerbes were introduced by Jean Giraud following ideas of Alexandre Grothendieck as a tool for non-commutative cohomology in degree 2. They can be seen as an analogue of fibre bundles where the fibre is the classifying stack of a group. Gerbes provide a convenient, if highly abstract, language for dealing with many types of deformation questions especially in modern algebraic geometry. In addition, special cases of gerbes have been used more recently in differential topology and differential geometry to give alternative descriptions to certain cohomology classes and additional structures attached to them.

In mathematics, a Killing vector field, named after Wilhelm Killing, is a vector field on a Riemannian manifold that preserves the metric. Killing fields are the infinitesimal generators of isometries; that is, flows generated by Killing fields are continuous isometries of the manifold. More simply, the flow generates a symmetry, in the sense that moving each point of an object the same distance in the direction of the Killing vector will not distort distances on the object.

<span class="mw-page-title-main">Symmetric space</span> A (pseudo-)Riemannian manifold whose geodesics are reversible.

In mathematics, a symmetric space is a Riemannian manifold whose group of symmetries contains an inversion symmetry about every point. This can be studied with the tools of Riemannian geometry, leading to consequences in the theory of holonomy; or algebraically through Lie theory, which allowed Cartan to give a complete classification. Symmetric spaces commonly occur in differential geometry, representation theory and harmonic analysis.

In algebraic geometry, a moduli space of (algebraic) curves is a geometric space whose points represent isomorphism classes of algebraic curves. It is thus a special case of a moduli space. Depending on the restrictions applied to the classes of algebraic curves considered, the corresponding moduli problem and the moduli space is different. One also distinguishes between fine and coarse moduli spaces for the same moduli problem.

In mathematics, Schubert calculus is a branch of algebraic geometry introduced in the nineteenth century by Hermann Schubert, in order to solve various counting problems of projective geometry. It was a precursor of several more modern theories, for example characteristic classes, and in particular its algorithmic aspects are still of current interest. The phrase "Schubert calculus" is sometimes used to mean the enumerative geometry of linear subspaces, roughly equivalent to describing the cohomology ring of Grassmannians, and sometimes used to mean the more general enumerative geometry of nonlinear varieties. Even more generally, "Schubert calculus" is often understood to encompass the study of analogous questions in generalized cohomology theories.

In mathematics, specifically in symplectic geometry, the momentum map is a tool associated with a Hamiltonian action of a Lie group on a symplectic manifold, used to construct conserved quantities for the action. The momentum map generalizes the classical notions of linear and angular momentum. It is an essential ingredient in various constructions of symplectic manifolds, including symplectic (Marsden–Weinstein) quotients, discussed below, and symplectic cuts and sums.

<span class="mw-page-title-main">Hermitian symmetric space</span> Manifold with inversion symmetry

In mathematics, a Hermitian symmetric space is a Hermitian manifold which at every point has an inversion symmetry preserving the Hermitian structure. First studied by Élie Cartan, they form a natural generalization of the notion of Riemannian symmetric space from real manifolds to complex manifolds.

<span class="mw-page-title-main">Ovoid (projective geometry)</span>

In projective geometry an ovoid is a sphere like pointset (surface) in a projective space of dimension d ≥ 3. Simple examples in a real projective space are hyperspheres (quadrics). The essential geometric properties of an ovoid are:

  1. Any line intersects in at most 2 points,
  2. The tangents at a point cover a hyperplane, and
  3. contains no lines.

In mathematics, a Minkowski plane is one of the Benz planes.

Affine geometry, broadly speaking, is the study of the geometrical properties of lines, planes, and their higher dimensional analogs, in which a notion of "parallel" is retained, but no metrical notions of distance or angle are. Affine spaces differ from linear spaces in that they do not have a distinguished choice of origin. So, in the words of Marcel Berger, "An affine space is nothing more than a vector space whose origin we try to forget about, by adding translations to the linear maps." Accordingly, a complex affine space, that is an affine space over the complex numbers, is like a complex vector space, but without a distinguished point to serve as the origin.

In quantum computing, quantum finite automata (QFA) or quantum state machines are a quantum analog of probabilistic automata or a Markov decision process. They provide a mathematical abstraction of real-world quantum computers. Several types of automata may be defined, including measure-once and measure-many automata. Quantum finite automata can also be understood as the quantization of subshifts of finite type, or as a quantization of Markov chains. QFAs are, in turn, special cases of geometric finite automata or topological finite automata.

<span class="mw-page-title-main">Yang–Mills equations</span> Partial differential equations whose solutions are instantons

In physics and mathematics, and especially differential geometry and gauge theory, the Yang–Mills equations are a system of partial differential equations for a connection on a vector bundle or principal bundle. They arise in physics as the Euler–Lagrange equations of the Yang–Mills action functional. They have also found significant use in mathematics.

In mathematics, the classical Möbius plane is the Euclidean plane supplemented by a single point at infinity. It is also called the inversive plane because it is closed under inversion with respect to any generalized circle, and thus a natural setting for planar inversive geometry.

In differential geometry, a Lie group action is a group action adapted to the smooth setting: G is a Lie group, M is a smooth manifold, and the action map is differentiable.

In algebraic geometry, a level structure on a space X is an extra structure attached to X that shrinks or eliminates the automorphism group of X, by demanding automorphisms to preserve the level structure; attaching a level structure is often phrased as rigidifying the geometry of X.

In mathematics, a Menger space is a topological space that satisfies a certain basic selection principle that generalizes σ-compactness. A Menger space is a space in which for every sequence of open covers of the space there are finite sets such that the family covers the space.

In geometry, smooth projective planes are special projective planes. The most prominent example of a smooth projective plane is the real projective plane . Its geometric operations of joining two distinct points by a line and of intersecting two lines in a point are not only continuous but even smooth. Similarly, the classical planes over the complex numbers, the quaternions, and the octonions are smooth planes. However, these are not the only such planes.

In mathematics, and especially differential geometry and mathematical physics, gauge theory is the general study of connections on vector bundles, principal bundles, and fibre bundles. Gauge theory in mathematics should not be confused with the closely related concept of a gauge theory in physics, which is a field theory which admits gauge symmetry. In mathematics theory means a mathematical theory, encapsulating the general study of a collection of concepts or phenomena, whereas in the physical sense a gauge theory is a mathematical model of some natural phenomenon.

References