TransferJet

Last updated April 26, 2024

TransferJet is a close proximity wireless transfer technology initially proposed by Sony and demonstrated publicly in early 2008.^[1] By touching (or bringing very close together) two electronic devices, TransferJet allows high speed exchange of data. The concept of TransferJet consists of a touch-activated interface which can be applied for applications requiring high-speed data transfer between two devices in a peer-to-peer mode without the need for external physical connectors.^[2]

TransferJet's maximum physical layer transmission rate is 560 Mbit/s. After allowing for error correction and other protocol overhead, the effective maximum throughput is 375 Mbit/s. TransferJet will adjust the data rate downward according to the wireless environment, thereby maintaining a robust link even when the surrounding wireless condition fluctuates.

TransferJet has the capability of identifying the unique MAC addresses of individual devices, enabling users to choose which devices can establish a connection. By allowing only devices inside the household, for example, one can prevent data theft from strangers while riding a crowded train. If, on the other hand, one wishes to connect the device with any other device at a party, this can be done by simply disabling the filtering function.

TransferJet uses the same frequency spectrum as UWB, but occupies only a section of this band available as a common worldwide channel. Since the RF power is kept under -70 dBm/MHz, it can operate in the same manner as that of UWB devices equipped with DAA functionality. In addition, this low power level also ensures that there will be no interference to other wireless systems, including other TransferJet systems, operating nearby.

By reducing the RF power and spatial reach down to a few centimeters (about an inch or less), a TransferJet connection in its most basic mode does not require any initial setup procedure by the user for either device, and the action of spontaneously touching one device with another will automatically trigger the data transfer. More complex usage scenarios will require various means to select the specific data to send as well as the location to store (or method to process) the received data.

TransferJet utilizes a newly developed TransferJet Coupler based on the principle of electric induction field as opposed to radiation field for conventional antennas. The functional elements of a generic TransferJet Coupler consist of a coupling electrode or plate, a resonant stub and ground. Compared to conventional radiating antennas, the TransferJet Coupler achieves higher transmission gain and more efficient coupling in the near-field while providing sharp attenuation at longer distances. Because the Coupler generates longitudinal electric fields, there is no polarization and the devices can be aligned at any angle.

TransferJet Specifications^[3]

Center Frequency	4.48 GHz
Bandwidth	560 MHz
Transmission Power	At or below -70 dBm/MHz (average) Corresponds to low-intensity radio wave regulation in Japan and Taiwan, and with local regulations in other countries and regions.
Transmission Rate	560 Mbit/s (max) / 375 Mbit/s (effective throughput) System can adjust the transmission rate depending on the wireless environment.
Modulation	Direct Sequence Spread Spectrum (DSSS) π/2-shift BPSK
Connection Distance	A few cm (nominal)
Connection Topology	1-to-1, Point-to-Point
Antenna Element	Longitudinal electric induction coupler

Although sometimes confused with Near Field Communication, TransferJet depends on an entirely different technology and is also generally targeted for different usage scenarios focusing on high-speed data transfer. Thus these two systems will not interfere with each other and can even co-exist in the same location, as already implemented in certain products.^[4] Other recent products combine TransferJet with wireless power to allow both data transfer and wireless charging capability simultaneously in the same location.^[5] TransferJet, NFC and wireless power are the three major near-field (contact-less) technologies that are expected to eliminate the physical connections and cables currently required to interface devices with each other.

Comparison with NFC

Technology	TransferJet	NFC
Center Frequency	4.48 GHz	13.56 MHz
Transmission Rate	560 Mbit/s	424 kbit/s
Main Use Cases	Fast file transfer, data synchronization audio/video streaming	Authentication, Authorization, Electronic Payment, ID Tagging
Topology	Point-to-Point(1:1), bi-directional symmetrical	Point-to-Point(1:1), bi-directional
Connection Type (power)	active-active	active-passive or active-active
Connection Distance	A few cm	A few cm
Antenna Element	Longitudinal electric induction coupler	Magnetic induction coil or loop
Standardization Body	ECMA 398, ISO/IEC 17568	ECMA 340, ISO/IEC 18092

The TransferJet Consortium^[6] was established in July 2008 to advance and promote the TransferJet Format, by developing the technical specifications and compliance testing procedures as well as creating a market for TransferJet-compliant, interoperable products. In September 2011, the consortium was registered as an independent non-profit industry association. As of June 2015, the Consortium is led by five Promoter companies, consisting of: JRC, NTT, Olympus, Sony (consortium administrator), and Toshiba. The Consortium currently also has around thirty Adopter companies.^[7] The TransferJet regular typeface and TransferJet logos are trademarks managed and licensed by the TransferJet Consortium.

Commercial products have been introduced since January 2010 and the initial product categories include digital cameras,^[8] laptop PCs,^[9] USB cradle accessories,^[10] USB dongle accessories^[11] and office/business equipment.^[12] Compliance testing equipment is provided by Agilent technologies and certification services are offered by Allion Test Labs. The first commercially available TransferJet development platform for embedded systems was launched by Icoteq Ltd in February 2015.^[13] Smartphones with integrated TransferJet functionality were launched in June 2015 from Fujitsu,^[14] and Bkav.^[15] Other product vendors include Buffalo and E-Globaledge.^[16]

TransferJet X^[17] is a new second-generation TransferJet specification capable of data transfer speeds of 13.1 Gbit/sec and above, or about 20 times the speed of current TransferJet. This specification uses the 60 GHz band and requires only 2 msec or less to establish a connection prior to the actual data transfer, thereby enabling the exchange of large content files even in the short amount of time it takes, for example, for a person to walk through a wicket gate. The TransferJet Consortium is currently defining the details of the TransferJet X ecosystem, based on the IEEE 802.15.3e standard^[18] completed and published in June 2017. The HRCP Research and Development Partnership,^[19] established in 2016, is developing an SoC solution for implementing TransferJet X in a variety of products and services to be released starting around 2020.

Related Research Articles

Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances and building personal area networks (PANs). In the most widely used mode, transmission power is limited to 2.5 milliwatts, giving it a very short range of up to 10 metres (33 ft). It employs UHF radio waves in the ISM bands, from 2.402 GHz to 2.48 GHz. It is mainly used as an alternative to wired connections to exchange files between nearby portable devices and connect cell phones and music players with wireless headphones.

Universal Serial Bus (USB) is an industry standard that allows data exchange and delivery of power between many types of electronics. It specifies its architecture, in particular its physical interface, and communication protocols for data transfer and power delivery to and from hosts, such as personal computers, to and from peripheral devices, e.g. displays, keyboards, and mass storage devices, and to and from intermediate hubs, which multiply the number of a host's ports.

PC Card is a parallel peripheral interface for laptop computers and PDAs.

Ultra-wideband is a radio technology that can use a very low energy level for short-range, high-bandwidth communications over a large portion of the radio spectrum. UWB has traditional applications in non-cooperative radar imaging. Most recent applications target sensor data collection, precise locating, and tracking. UWB support started to appear in high-end smartphones in 2019.

Wireless communication is the transfer of information (telecommunication) between two or more points without the use of an electrical conductor, optical fiber or other continuous guided medium for the transfer. The most common wireless technologies use radio waves. With radio waves, intended distances can be short, such as a few meters for Bluetooth or as far as millions of kilometers for deep-space radio communications. It encompasses various types of fixed, mobile, and portable applications, including two-way radios, cellular telephones, personal digital assistants (PDAs), and wireless networking. Other examples of applications of radio wireless technology include GPS units, garage door openers, wireless computer mouse, keyboards and headsets, headphones, radio receivers, satellite television, broadcast television and cordless telephones. Somewhat less common methods of achieving wireless communications involve other electromagnetic phenomena, such as light and magnetic or electric fields, or the use of sound.

ExpressCard, initially called NEWCARD, is an interface to connect peripheral devices to a computer, usually a laptop computer. The ExpressCard technical standard specifies the design of slots built into the computer and of expansion cards to insert in the slots. The cards contain electronic circuits and sometimes connectors for external devices. The ExpressCard standard replaces the PC Card standards.

Wireless USB (Universal Serial Bus) is a short-range, high-bandwidth wireless radio communication protocol created by the Wireless USB Promoter Group, which is intended to increase the availability of general USB-based technologies. It is unrelated to Wi-Fi and different from the Cypress Wireless USB offerings. It was maintained by the WiMedia Alliance which ceased operations in 2009. Wireless USB is sometimes abbreviated as WUSB, although the USB Implementers Forum discouraged this practice and instead prefers to call the technology Certified Wireless USB to distinguish it from the competing UWB standard.

In computing, a docking station or port replicator (hub) or dock provides a simplified way to plug-in a mobile device, such as connect common peripherals to a laptop, or charge a smartphone. Because a wide range of dockable devices—from mobile phones to wireless mouse—have different connectors, power signaling, and uses, docks are unstandardized and are therefore often designed for a specific type of device.

USB On-The-Go is a specification first used in late 2001 that allows USB devices, such as tablets or smartphones, to also act as a host, allowing other USB devices, such as USB flash drives, digital cameras, mouse or keyboards, to be attached to them. Use of USB OTG allows devices to switch back and forth between the roles of host and device. For example, a smartphone may read from removable media as the host device, but present itself as a USB Mass Storage Device when connected to a host computer.

A home network or home area network (HAN) is a type of computer network that facilitates communication among devices within the close vicinity of a home. Devices capable of participating in this network, for example, smart devices such as network printers and handheld mobile computers, often gain enhanced emergent capabilities through their ability to interact. These additional capabilities can be used to increase the quality of life inside the home in a variety of ways, such as automation of repetitive tasks, increased personal productivity, enhanced home security, and easier access to entertainment.

The WiMedia Alliance was a non-profit industry trade group that promoted the adoption, regulation, standardization and multi-vendor interoperability of ultra-wideband (UWB) technologies. It existed from about 2002 through 2009.

Universal Serial Bus 3.0, marketed as SuperSpeed USB, is the third major version of the Universal Serial Bus (USB) standard for interfacing computers and electronic devices. It was released in November 2008. The USB 3.0 specification defined a new architecture and protocol, named SuperSpeed, which included a new lane for a new signal coding scheme providing full-duplex data transfers that physically required five additional wires and pins, while preserving the USB 2.0 architecture and protocols and therefore keeping the original four pins and wires for the USB 2.0 backward-compatibility, resulting in nine wires in total and nine or ten pins at connector interfaces. The new transfer rate, marketed as SuperSpeed USB (SS), can transfer signals at up to 5 Gbit/s with nominal data rate of 500 MB/s after encoding overhead, which is about 10 times faster than High-Speed. USB 3.0 Type-A and B connectors are usually blue, to distinguish them from USB 2.0 connectors, as recommended by the specification. and by the initials SS.

Mobile High-Definition Link (MHL) is an industry standard for a mobile audio/video interface that allows the connection of smartphones, tablets, and other portable consumer electronics devices to high-definition televisions (HDTVs), audio receivers, and projectors. The standard was designed to share existing mobile device connectors, such as Micro-USB, and avoid the need to add video connectors on devices with limited space for them.

The Wireless Gigabit Alliance was a trade association that developed and promoted the adoption of multi-gigabit per second speed wireless communications technology "WiGig" operating over the unlicensed 60 GHz frequency band. The alliance was subsumed by the Wi-Fi Alliance in March 2013.

IEEE 1394 is an interface standard for a serial bus for high-speed communications and isochronous real-time data transfer. It was developed in the late 1980s and early 1990s by Apple in cooperation with a number of companies, primarily Sony and Panasonic. It is most commonly known by the name FireWire (Apple), though other brand names exist such as i.LINK (Sony), and Lynx.

A mobile broadband modem, also known as wireless modem or cellular modem, is a type of modem that allows a personal computer or a router to receive wireless Internet access via a mobile broadband connection instead of using telephone or cable television lines. A mobile Internet user can connect using a wireless modem to a wireless Internet Service Provider (ISP) to get Internet access.

Qi is an interface standard for wireless power transfer using inductive charging. The standard allows compatible devices, such as smartphones, to charge their batteries when placed on a Qi charging pad, which can be effective over distances up to 4 cm.

USB-C, or USB Type-C, is a 24-pin connector that supersedes previous USB connectors and can carry audio, video and other data, e.g., to drive multiple displays or to store a backup to an external drive. It can also provide and receive power, such as powering a laptop or a mobile phone. It is applied not only by USB technology, but also by other protocols, including Thunderbolt, PCIe, HDMI, DisplayPort, and others. It is extensible to support future standards.

Samsung DeX is a feature included on some high-end Samsung handheld devices that enables users to extend their device into a desktop-like experience by connecting a keyboard, mouse, and monitor. The name "DeX" is a contraction of "Desktop eXperience".

The initial versions of the USB standard specified connectors that were easy to use and that would have acceptable life spans; revisions of the standard added smaller connectors useful for compact portable devices. Higher-speed development of the USB standard gave rise to another family of connectors to permit additional data paths. All versions of USB specify cable properties; version 3.x cables include additional data paths. The USB standard included power supply to peripheral devices; modern versions of the standard extend the power delivery limits for battery charging and devices requiring up to 240 watts. USB has been selected as the standard charging format for many mobile phones, reducing the proliferation of proprietary chargers.

References

External links

Transferjet.org: TransferJet Consortium official website

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] "Sony develops TransferJet".

[2] "TransferJet Expanded White Paper" (PDF).

[3] "Basic Specifications".

[4] "Sony VAIO F Series Laptop with TransferJet/FeliCa dual function".

[5] "Sony's New Camera Supports Wireless Power Transmission, TransferJet".

[6] "TransferJet Consortium established".

[7] "About TransferJet Consortium".

[8] "Digital Still Camera".

[9] "Laptop PC".

[10] "USB Cradle Accessory".

[11] "Dongle Accessories for USB, microUSB and Lightning".

[12] "Discussion Table".

[13] "Hardware Development Platform".

[14] "Hardware Fujitsu smartphone model: ARROWS NX F-04G".

[15] "BKAV smartphone model: BPhone".

[16] "E-Globaledge Corporation". 16 March 2020.

[17] ttps://www.transferjet.org/news/press/PR-E-IEEE802153e_final.pdf ^{[ bare URL PDF ]}

[18] "IEEE SA - Standards Store | IEEE 802.15.3e-2017".

[19] "HRCP".

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]